How to make the Deprtmnt field in the cost center master data as required ?

Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
Suresh

Hi Eli,
Thanks for the quick reply
while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
thanks
regards
Suresh

Similar Messages

  • How to make the Profit Center Field Mandatory in Cost center Master Data

    Dear All,
    Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
    Thanks in advance!
    Regards,
    Rajeswari Shankar.

    Hi Rajeswari,
    You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.) 
    Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
    Regards,
    Greta

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

  • How to make Department field in cost centre master data a required field?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Sursh
    Create a transaction varinat through SHD0.
    For the department field, activate the Requred check box field.
    Then activate the variant.
    Regards
    SAP Student

  • Company code field in cost center master data

    I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

    Hi MG,
    Appearance of the field "Company Code" in cost center master data depends on the following point...
    In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
    If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
    I hope u got it...
    Srikanth Munnaluri

  • How to Make the Name 1 field in cost center master data as compulsory

    Hi,
    We have requirement from the client to make the Name 1 field in the adress tab of the cost center master data as a compulsory field when the cost center master data is accessed through KS01, KS02 T code.
    There is also existing cost center master data in SAP system for which NAME 1 field is blank. How the issue of the existing master data can be dealt if there are no data NAME 1 field in the existing cost center master data.
    regards
    Partha B

    Hi
    This path refers to exit COOMKS01.... (For Cost Center Enhancement using Custom fields)
    For the above requirement, I belive COOMKS02 is the right one.... (Custom checks before saving)
    Br, Ajay M

  • Cost Center Master data field status change

    Hello Gurus,
    I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

    Dear,
    You can use screen variant also...
    Transaction code: SHD0
    and make that field as required.

  • Remove Mandatory field in Cost center master data

    Dear All,
      I want to remove the mandatory person responsible in the cost center master data. How to do this
    Regards
    Vasantha

    hi Vasantha,
    as far as I know, this is not possible. If a field is mandatory or not in cost center master data is determined by the system.
    hope this helps
    ec

  • "Region" field in Cost center master data needed as mandatory

    Hello Gurus,
    I would like to ask you where exactly in SPRO we can customize the field "Region" in Address tab in Cost center creation as a mandatory? so far its only optional
    is this possible?
    thanks in advance for your help.
    Hana

    Hey Hana,
    According to [this thread|Re: KS01 , Field status Cost center master data;, you will need a user exit to accomplish that.

  • Company Code field now shown in Cost Center Master Data

    Hi
    I am new, I configured CCA. Created Controlling area and versions. When I created a cost center company code field not shown. I think one cost center assined to a one company code but in cost center master data Company code field not shown. I want to cost center company code specific. I using ECC6
    Pl help.

    Hi,
    When you will assign additional company codes, the cost centre created now, by default will be assigned to the existing company code, and for the new one - you will have to define cost centres again. So, everything is fine, do not worry.
    Regards,
    Eli

  • Lsmw Uploading cost center master data fields ERFNM,ERFDT at History tab

    Hi Gurus,
    I done uploading of cost center master data through LSMW.everything is fine but I have one issue.
    I done Uploading from 4.6 now in 4.6 the cost center was created by some one else when I am doing in ECC 6.0 system automatically taking my name as default it means I can not enter in ECC 6.o that who originally created  it  and what was that date. Is there any way to solve it or system will take only mine name in Fields( ERFNM,ERFDT )at cost center History Data while creating Master data.
    Many Many Thanks

    Yes, system will take the creator name from the person who actually creates the cost center in SAP.
    It will be filled automatically and you can not change the creator name.
    This is to ensure better audit trail and tracability.
    Regards,
    Gaurav

  • How to suppress business area feild in cost center master data urgent plzzz

    how to suppress business area feild in cost center master data

    Hi ,
    Please check these notes
    Note 606933  OKEON: Business area is no required entry field
    Note 506308  OKEON: Business area financial statement prevents change
    Note 422801  KS01 with template does not check business area
    It might be possible to create a modification,.
    Please assign points if it useful
    Regards
    Ravinagh Boni

  • Making segment field mandatory in Profit Center Master Data

    Hi,
    We are using SAP version ECC 6. While creating a profit center using KE51, we would like to make the 'Segment' field mandatory. Can anyone tell me how can this be done? Thanks.
    Regards,
    Sangeeta

    Hi,
    There seems to be no standard setting which makes this mandatory.  You may need to take the help of an ABAPer to create a field exit.
    Cheers.

  • Suppress business area field in cost center master data(KS01)

    Hi
    As the client is not using business area, he don't want the business area field to appear in the cost center creation screen(KS01).
    Is there any work around to this
    Regards
    Aravind

    Hi Aitipamula,
    Have you looked transaction code <b>OB65</b> to deactive the business area?
    Also you can technically use transaction variant (t/code SHD0) to supress the field. For more information, please check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • How to hide field in profit center masted data?

    Hi,
    I would like to know how to hide the field segment in profit
    center master data
    Alternatively I would like to know which user exit used
    to prevent the feeding of the field segment in profit center
    master data.
    Thanks in advance,
    Osvaldo
    Edited by: Osvaldo Cavagnero on Mar 4, 2010 1:43 PM

    Dear,
    Try de-activating the indicator through
    SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
    Maintain Segment.
    Hopefully it has to work.
    Regards,
    Syed Hussain.

Maybe you are looking for

  • SORT ORDER WITHIN GROUPS

    Post Author: Kara CA Forum: General Hi, I am using version 9. I have designed a report based on an access control database. It shows a person's time in and time out, then totals these hours. My report is grouped as follows: Department Date/Time Uniqu

  • Unknown Error Message (9) When trying to restore Ipad 1

    Hi, recently i purchased an iPad 1, and am having problems when trying to restore the device. I put it into restore mode as it was going to sync every app on itunes which i didn't want, so i had to try and set it up as a new ipad again. Now the ipad

  • Firewire is dead.  But what do you think about this idea?

    I know that the firewire port is saudered onto the logic board on my computer and I use to use it all the time but I was connecting my 12" powerbook to a powermac G4 through target disk mode and I accidently plugged in the firewire end in the powerma

  • Homehub 2.0 Ethernet Ports

    I'm having a really frustrating time with all 3 ports on my Homehub 2.0 (Type B) ... No matter which port I use i'm only getting 7mb down / 0.2mb up and a 55 ping. (used several cat 5 cables) If I use the WIFI i get 55mb down / 20mb up and a 22 ping.

  • My iPad is frozen and will not budge, My iPad is frozen and will not budge

    My iPad is frozen and will not budge