How to make the fade out effect.

Hi Everyone!
Can someone go through the steps for me in regards to making this effect below.
Where the stripes are faded out down the page.
Would indesign be the best place to make this in?

InDesign is good for doing that. I created three layers (no required, but helps to isolate the elements).
First, create a colored background.
Second, make a layer for the white bars. I duplicated one, then used Object > Transform Again > Transform Again to make the rest. Then I grouped them.
Apply the Effect called Gradient Feather to the group. Adjust the settings as shown.
Add a type layer.

Similar Messages

How can I make a fade out effect at the end of the song in garageband for iPad?

I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

ClaudioWalrus wrote:
How can I make a fade out effect at the end of the song in garageband for iPad?
GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Guide - How to make the most out of your sp

This guide is designed to tell you
.what you should use for the smallest files with almost floorless results
2.some suggestions of how to get your files smaller without sacrificing much audio quality
if you have a flash player, or a hard disk based player and lots of music you want to get the best quality for the least file size. In my opinion a Lame encoded MP3 is probably your best option and if you just want to make your wav files less than a third of the size at a great quality just use 320kb
ps.
LAME will give you the best quality for the same amount of space.
However if you want to have lots of tracks on a small space and still get good quality here are the settings and FREE software you should use.
Razor Lame - An easy interface for the use of Lame (MP3 Encoder), extract the zip files into a folder
- http://www.dors.de/razorlame/index.php
Lame - get the latest lame bundle and add lame.exe to your razor lame folder this will allow razor lame to encode your wav files to MP3 using the latest and greatest version of lame.
- http://www.rarewares.org/mp3.html
before I tell you the settings and explain why I have chosen them, if you want to save time you can just paste this (-b 64 -m j -h -V -B 320 --resample 44.) into the custom options bit, this will set up my options without you having to fiddle about, under the expert tab (without the brackets) then tick only use custom options.
The settings - in the lame options do this.... choose MODE as Joint Stereo (this will use one channel when both channels are the same, then 2 when there different therefore less space) and set up your output directory (this is where all your mp3 will be sent after they have been encoded) this directory must be manually created by you otherwise razor lame will copy the mp3 to the folder of the original file. Ok this is going to sound silly, but choose your current bit rate as 64kbits (don?t worry this will be your minimum bit rate for a VBR file)
Now click the advanced tab, all you need to do here is set the optimisation to "Quality" this will mean the MP3s take longer to encode but the final result will be better quality for the same space.
Next click on the VBR tab, this stands for variable bit rate and allows the bit rate of the mp3 to change throughout the song giving busier parts a greater bit rate (to keep most of the sounds) and less busy part less bit rate as they do not need as much bit rate and it will save space. Click enable VBR and Choose 320kbps as your maximum bit rate.
Your VBR file can now use bit rates between 80kbps and 320kbps, but now you need to tell razor lame whether it should tend to use higher bit rates, or lots of lower bit rates, you do this with the quality option. I would advise you choose as this will give you great quality and a file only about 4% the size of the original.
Now all you have to do is click the audio processing tab and choose the output sampling frequency as 44. kHz
and encode away.
With these options your original wav files will be compressed to 0.4 of there size as wav files but have the quality of a normal 256kbps mp3 which is 0.8 the size of an original wav file. Which means you can now fit 30%-40% more tracks without loss of quality, or you could fit the same amount of mp3s with noticeably higher quality.
These files are as small as they can be whilst almost sounding perfect but here?s what you should consider if you want to reduce quality and size of file.
- Change the quality in the VBR tab, instead of one try 2-5, the bigger the number the more the compression but the worse the quality of the file.
- Lower the max bit rate for the VBR encoding, go into the VBR tab and select a lower bit rate, i wouldn?t advise going below 224kbit.
- Don?t use stereo, Lots of people don?t seem to care, stereo or mono though 2 speakers, if you use mono, instead of the 2 speakers playing slightly different things they will both play the same, this will save space and increase quality (so you could lower the quality setting a bit more).
At the end of the day there are lost of options for you to mess around with and its up to you to find what?s best for you, hopefully these guidelines are useful (however i would defiantly use lame)Message Edited by -Recoba- on -04-987 05:47 PMMessage Edited by -Recoba- on 03-02-2005 07:48 PM

Bloodangel05 wrote:
Very good guide-They didnt sticky it
Nope, but I've bookmarked it for future reference

How to make images fade in and out

how to make images fade in and out continuously

HI,
The Ken Burns effects can do this nicely. Available in the iLife suite of software.
iLife 06 minimum requirements:
http://support.apple.com/kb/HT2675
iLife 06 - Amazon
Carolyn

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

How to make the zoom in/out scale appear in the media browser ?

How to make the zoom in/out scale appear in the media browser ? My videos only appear as a file list (only the names) and the zoom in/out device is currently not in the media browser...

I meant that there is no "Icon mode" button or "List mode" button in my media browser. How to make them appear ?

Creating fade in fade out effect in catalyst cs5

Hi there ive just downloaded the flash catalyst cs5 trial version and am trying
to create a fade in fade out effect with my pictures so i can upload to my
website. Ive been on it for two days now and am getting no where
anybody have any suggestions on how to do it. Ive tried alot of tutorials
on the net but nothing seems to work
please help thanks

To make maters worse all the tutorials i use seem to have different cs5 installed than me
they seem to have more features. They say click on this and click on that but i dont even
have what they say in my menus??? man why cant it be easy just upload the photos
click fade in fade out and be done with it.

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

Best way to make a burn out effect like in this film?

I am trying to figure out how to make the same kind of film burn out effect like this short film has in the beginning.
Check out the beginning of this short film. The yellow/red burn outs that are on the first couple of clips, what is the easiest way to make them in Motion (or FCP)?
I've been fumbling a bit with the "Cool" emitter in Motion, but can't get the same feel.
Please give me some tips, if you can.
Oh and here is a link for the short film I am referring to:
http://frenchquarterfeatures.com/movies/eighteen_seconds.640.mov
Thanks in advance...

The effect emulates fogging of the film, as if someone opened the camera before the film had been taken up onto the reel or into the magazine.
I'd download that clip, convert it to a useable format and play with keying filters till I got mostly the flashes. Then I'd start adding masked layers and shapes to fill in the rest or to cover up residual hunks of the film's stars. Precompose or render. This will give you a place to start. Use it to blend in a moving red-yellow image.
Or look at ARTBEATS site and see what they've got for film burn effects (not Ken Burns effects). I'll be tthta's where this filmmaker got his/hers.
bogiesan

I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located; re-select country/region even if it is correct
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

How to make the main() thread wait?

I would like to know how to make the main() thread wait for another thread?If I use wait() method in main() method it says "non-static method wait() cannot be referenced from a static context",since main()
is static.

Here is an example how you may wait for a Thread in the main -
but be careful, this is no real OO:
public class WaitMain {
// this is the thread class - you may also create
// a runnable - I use a inner class to
// keep my example simple
     public static class ThreadWait extends Thread{
          public void doSomething(){
               synchronized(syncObject){
                    System.out.println("Do Something");
                    syncObject.notify();
          public void run(){
               // sleep 10 seconds - this is
               // a placeholder to do something in the thread
               try{
                    sleep(10000);
                    doSomething();
                    sleep(10000);
               catch(InterruptedException exc){
// this is the object we wait for -
// it is just a synchronizer, nothing else
     private static Object syncObject = new Object();
     public static void main(String[] args) {
          System.out.println("This will start a thread and wait for \"doSomething\"");
          ThreadWait t= new ThreadWait();
          t.start();
          synchronized(syncObject){
               try{
// this will wait for the notify
                    syncObject.wait();
                    System.out.println("The doSomething is now over!");
               catch(InterruptedException exc){
          // do your stuff

How to make the buttons INVISIBLE in the Application toolbar

Hi All,
I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
Thank you in advance.
Regards.
Paddu.

Hi,
Try to use below in the PBO module status_0100 OUTPUT.
DATA t_fcode TYPE TABLE OF sy-ucomm.
refresh t_fcode[].
APPEND 'Function code name of the button' TO t_fcode.
Check the condition here for which you want to make field visible.
DELETE FCODE of the button from T_FCODE table
ENDIF.
SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

How to make the TARGET of clone stamp 2 simultaneous layers?

Does anyone know how to make the TARGET of the clone stamp, multiple simultaneous layers? Or maybe more accurately, how to clone stamp the top layer and have the layer underneath doing the exact same cloning simultaneously. Or maybe a workaround? I've tried linking the layers, and multiple layer selection with no joy.
Here is what I'm trying to do. I'm duplicating a layer, then applying LucisArt to one of the layers to greatly exaggerate local contrast. Though I'm not using LucisArt as the final, I want to use it to assist in smoothing blotchy skies, banding, and finding hidden camera sensor dust spots.
I want to clone stamp on the LucisArt layer so I can watch my progress, but also have the underlying layer doing the exact clone stamping at the same time. Thanks ... Aaron

Thanks everyone.
Dennis, You are correct. I know how to selectively apply the LucisArt filter, that's not what I'm looking for. I want my end result to have NO LucisArt effect at all. I'm trying to use the LucisArt layer to drastically exaggerate flaws such as camera sensor dust, AND I want to correct these flaws on the LucisArt layer where they are obvious. The LucisArt layer is only for reference. But the trick is to get CS3 to do to the non LucisArt layer, exactly what I did to the LucisArt layer.
So imagine I have this otherwise nice photo, but the photographer (this happened) had an amazingly dirty sensor. Half of the dust spots I can hardly see, but the client wants it super clean. So I duplicate the layer so I have two exactly the same. I then apply a strong LucisArt filter the top layer which reveals all the spots including many I couldn't see on the original layer. I'd like to fix all these spots with the clone stamp tool on the LucisArt layer where I can see them easily, then toss that layer. The original below would have all those spots fixed, but sampled from it's own layer and stamped to it's own layer.
As it is, I can click the LucisArt layer on, place my finger on the spot, then turn that layer off and hopefully see the spot and remove it from the layer underneath. Very tedious indeed.
... Aaron

How to make a snapshot out of a movie file?

How to make a snapshot out of a movie file and integrate this snapshot into the movie? Thanks, Wolfgang

Either you use the Hold function from the Retiming popup or you export an image and reimport it.

How to make the fade out effect.

Similar Messages

Maybe you are looking for