How to make the following additions to the attached vi file?

Dear all,
after a great struggle and timely advise from dev we wrote this labview program for data acquistion.
but there are couple of things need to be done yet and we tried a lot but we couldnt come up with a solution. i listed the two main required changes in the program and request all your experise to help me with this matter. please find the attached program and the changes required.
thanks for your time. and any other suggestions that improves the program are welcome.
many thanks.
Rishe.
Attachments:
narrowband.vi ‏869 KB

Hi Rishe,
I admit that I did not take into account the DAQmx part of you vi (I simply assumed it was working).
In my modified vi, I rather focussed on extracting the proper data from the array in a continuous mode. Basically I extract portions of the array, each of length 1000, cycling the offset from 0 to the maximum available (if this is still not clear to you, you may check the attached vi to to see how this works).
According to your code, the program loop can finish only on two conditions:
1) the STOP button is pressed
OR
2) there is an error in some DAQmx vi
So, since you did not press the STOP button and more than 1000 data points are written, an error MUST occur in the DAQmx Read or Write.
Unfortunately, I cannot help you very much about this, as I don't have a suitable hardware to do some tests nor enough experience in waveform generation to spot possible problems .
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011
Attachments:
Example.vi ‏19 KB

Similar Messages

Workflow, How to make the attached SAP shortcut linked to a webgui t-code ?

How to make the attached SAP shortcut linked to the webgui ? (Instead of the SAP Gui )
When I received a "workflow msg" in my outlook inbox, I clicked on the attached shortcut.
And a logon pop-up comes to me, in order that I logon to SAP in the SAPGui mode.
It enables me to make a decision in SAP.
I'd like that when the user receive the shortcut ( or a link ), it opens the webgui mode ?
How can I do that ?
Thx a lot,
Erwan

thx

How to make the user choose file.

I am making a program in which a file is read using RandomAcessFile. I wamt the user to choose the file from its location. I am giving the code. Just help me in knowing where the error is.
import java.awt.*;
import java.awt.event.*;
public class ChooseFiles{
     public static void main(String[] args){
          getFiles();
     public static String getFiles(){
          DialogFrames df = new DialogFrames("MedInfo");
          df.setSize(800,555);
          df.addWindowListener(new WindowAdapter(){
               public void windowClosing(WindowEvent we){
                    System.exit(0);
          df.show();
          return df.getFile();
class DialogFrames extends Frame implements ActionListener{
     Menu m = new Menu("File");
     MenuBar mb = new MenuBar();
     MenuItem mi = new MenuItem("Open");
     FileDialog fd;
     DialogFrames(String title){
          super(title);
          setLayout(new GridLayout(1,1));
          m.add(mi);
          mi.addActionListener(this);
          mb.add(m);
          setMenuBar(mb);
          fd = new FileDialog(this,"Open");
     public void actionPerformed(ActionEvent ae){
          if (ae.getSource()==mi){
               fd.setVisible(true);
     public String getFile(){
          return fd.getFile();
import java.io.*;
public class Plot{
     boolean flag = true;
     ChooseFiles cf = new ChooseFiles();
     public static void main(String[] args){
          try{
               String ftr = cf.getFiles();
               RandomAccessFile raf = new RandomAccessFile(ftr,"r");
               long l = 0;
               while (l < raf.length()){
                    String str = raf.readLine().toString();
                    l = raf.getFilePointer();
                    if (str != null){
                         System.out.println("This line is " str" at l = "+l);
               raf.close();
          }catch (Exception e){
               System.out.println("Caught Exception " + e.toString());
I get the following compilation error. Please help me to sort it out.
Plot.java:7: Can't make a static reference to nonstatic variable cf in class Plot.
String ftr = cf.getFiles();
^

I made the changes to Plot.java.
This is the first one.
import java.io.*;
public class Plot{
     boolean flag = true;
     public static void main(String[] args){
          Plot plot = new Plot();
     Plot(){
          try{
               String ftr = "";
               ChooseFiles cf = new ChooseFiles();
               ftr += cf.getFiles();
               RandomAccessFile raf = new RandomAccessFile(ftr,"r");
               long l = 0;
               while (l < raf.length()){
                    String str = raf.readLine().toString();
                    l = raf.getFilePointer();
                    if (str != null){
                         System.out.println("This line is " str" at l = "+l);
               raf.close();
          }catch (Exception e){
               System.out.println("Caught Exception " + e.toString());
It gives the following exception.
Caught Exception java.io.FileNotFoundException: null (The system cannot find the file specified)
This is the second one.
import java.io.*;
public class Plot{
     boolean flag = true;
     public static void main(String[] args){
          Plot plot = new Plot();
     Plot(){
          try{
               ChooseFiles cf = new ChooseFiles();
               String ftr = cf.getFiles();
               RandomAccessFile raf = new RandomAccessFile(ftr,"r");
               long l = 0;
               while (l < raf.length()){
                    String str = raf.readLine().toString();
                    l = raf.getFilePointer();
                    if (str != null){
                         System.out.println("This line is " str" at l = "+l);
               raf.close();
          }catch (Exception e){
               System.out.println("Caught Exception " + e.toString());
Caught Exception java.lang.NullPointerException

HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable? The article referenced is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary?

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

JLabel in JTextPane - how to make the JLabel be highlightable

Hi,
This follows on from this post :
http://forum.java.sun.com/thread.jspa?threadID=741036&tstart=0
I'm inserting a JLabel into a JTextPane, and want it to look like the other text there. However when you select the text, the JLabels don't have the highlight painted on them. Does anyone know how to make the highlight be painted over the label?
I've tried looking at the Highlighter, HighlightPainter classes but as yet no joy.
thanks a lot,
Tom

If I understand what you're after you may find the following will achieve it:
((DefaultHighlighter)textPane.getHighlighter()).setDrawsLayeredHighlights(false);Don't ask me why, though!!
Hope this helps.

How to make the servo motor to move in steps of set degrees and stop

how to make the servo motor to move in steps of set degrees and stop

Hi,
I think the following document would be a good starting place: NI Developer Zone Tutorial: Single Axis Moves It includes links to several example programs that you may find useful for your application. Keep in mind that there are many motion examples that ship with LabVIEW as well.
I strongly recommend that you check out the following documents as well:
NI Developer Zone Tutorial: Simple Point to Point Motion
NI Dev
eloper Zone Tutorial: Hands-On Motion
NI Developer Zone Tutorial: Axis Settings for Motion Controllers
These tutorials will help give you a good foundation for understanding motion control systems.
Best wishes!
Dawna P.
Applications Engineer
National Instruments

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How to make the focus to the TextInput field

Hi,
How to make the focus to the TextInput field. I tried with userIDTxtIt.setFocus(); The focus is available to the text input. but when i enter the value as 'Thiru' to the TextInput field, the keyboard is not available there. so i tried with userIDTxtIt.dispatchEvent(new MouseEvent(MouseEvent.DOUBLE_CLICK));
still key board focus is not availble to the text input.
Regards,
Thiru

Thanks for your reply.
I got the more info by reading the comments inthe following link.
http://blog.flexexamples.com/2008/09/23/setting-focus-in-flex-using-the-focus-manager/
regards,
Thiru

How to make the ear file including the 3rd party jar files without menttion in the System Classpath.

Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file the following
dir structure .And i mentioned the Class-path including all jar files in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic script
.How to make the EAR file incliding ejbjar,webapplication and 3rd party jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

Refer to the section
Handling Utility classes
http://dev2dev.bea.com/products/wlserver/articles/musser.jsp
thanks,
Deepak
"Ashok Samrat" <[email protected]> wrote:
>
Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar
files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file
the following
dir structure .And i mentioned the Class-path including all jar files
in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar
does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic
script
How to make the EAR file incliding ejbjar,webapplication and 3rd party
jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
The addons '''REMAINED''' including:
* addons I already used in Fx 3.6 (like webmail notifie , xmarks)
* ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
The addons '''DISAPPEARED''' including:
* addons I already used in Fx 3.6 (like yoono)
* '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
Some more details:
* This happened when i use RC for already a few days and keep on even i restart Fx and windows.
* The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
* This addons are really '''disappeared''' but not disable only!
* This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
* I try to install back one of the addons - Stylish, the installed code are still here.
* It is nearly an impossible mission to install every missing addons again, as it really kill my time.

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

I created a form and I'm not sure how to make the 'submit' button send me the collected information.

Hello everybody. I am a web designer (NOT a developer)
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
Now I need to link the 'submit button' so that it will e-mail me the completed form.
(formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
(after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
-Brenna
The e-mail I would like the form sent to is:
[email protected]
Here is the the code for my form 'as is' :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Create a Profile</title>
<link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
<script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
</head>
<body id="main_body" >
          <img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
          <div id="form_container">
                    <h1><a>Create a Profile</a></h1>
            <form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
                    <div class="form_description">
                              <h2 align="center">Create a Tommy Lemonade Profile</h2>
                              <p></p>
                    </div>
                      <ul >
                                          <li id="li_1" >
                    <label class="description" for="element_1">Name </label>
                    <span>
                              <input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
                              <label>First</label>
                    </span>
                    <span>
                              <input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
                              <label>Last</label>
                    </span>
                    </li>                    <li id="li_23" >
                    <label class="description" for="element_23">Service Provider Type </label>
                    <span>
                              <input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_1">Barber</label>
<input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_2">Hairstylist</label>
<input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_3">Nail Technician</label>
<input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_4">Massage Therapist</label>
<input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_5">Skin Care</label>
<input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_6">Esthetician</label>
<input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_7">Make Up Artist</label>
                    </span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
                    </li>                    <li id="li_19" >
                    <label class="description" for="element_19">Top 5 services </label>
                    <div>
                              <textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
                    </li>                    <li id="li_20" >
                    <label class="description" for="element_20">List all services you offer & thier starting price </label>
                    <div>
                              <textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
</small></p>
                    </li>                    <li id="li_12" >
                    <label class="description" for="element_12">Personal Phone </label>
                    <span>
                              <input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_12_1">(###)</label>
                    </span>
                    <span>
                              <input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_12_2">###</label>
                    </span>
                    <span>
                               <input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
                              <label for="element_12_3">####</label>
                    </span>
                    <p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
                    </li>                    <li id="li_21" >
                    <label class="description" for="element_21">E-mail (Required) </label>
                    <div>
                              <input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
                    </div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
                    </li>                    <li id="li_6" >
                    <label class="description" for="element_6">Confirm your e-mail (Required) </label>
                    <div>
                              <input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
                    </div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
                    </li>                    <li id="li_3" >
                    <label class="description" for="element_3">Web Site </label>
                    <div>
                              <input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
                    </div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
                    </li>                    <li id="li_4" >
                    <label class="description" for="element_4">Place of employment </label>
                    <div>
                              <input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
                    </div>
                    </li>                    <li id="li_2" >
                    <label class="description" for="element_2">Work Address </label>
                    <div>
                              <input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
                              <label for="element_2_1">Street Address</label>
                    </div>
                    <div>
                              <input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
                              <label for="element_2_2">Address Line 2</label>
                    </div>
                    <div class="left">
                              <input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
                              <label for="element_2_3">City</label>
                    </div>
                    <div class="right">
                              <input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
                              <label for="element_2_4">State / Province / Region</label>
                    </div>
                    <div class="left">
                              <input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
                              <label for="element_2_5">Postal / Zip Code</label>
                    </div>
                    <div class="right">
                              <select class="element select medium" id="element_2_6" name="element_2_6">
                              <option value="" selected="selected"></option>
<option value="Afghanistan" >Afghanistan</option>
<option value="Albania" >Albania</option>
<option value="Algeria" >Algeria</option>
<option value="Andorra" >Andorra</option>
<option value="Antigua and Barbuda" >Antigua and Barbuda</option>
<option value="Argentina" >Argentina</option>
<option value="Armenia" >Armenia</option>
<option value="Australia" >Australia</option>
<option value="Austria" >Austria</option>
<option value="Azerbaijan" >Azerbaijan</option>
<option value="Bahamas" >Bahamas</option>
<option value="Bahrain" >Bahrain</option>
<option value="Bangladesh" >Bangladesh</option>
<option value="Barbados" >Barbados</option>
<option value="Belarus" >Belarus</option>
<option value="Belgium" >Belgium</option>
<option value="Belize" >Belize</option>
<option value="Benin" >Benin</option>
<option value="Bhutan" >Bhutan</option>
<option value="Bolivia" >Bolivia</option>
<option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
<option value="Botswana" >Botswana</option>
<option value="Brazil" >Brazil</option>
<option value="Brunei" >Brunei</option>
<option value="Bulgaria" >Bulgaria</option>
<option value="Burkina Faso" >Burkina Faso</option>
<option value="Burundi" >Burundi</option>
<option value="Cambodia" >Cambodia</option>
<option value="Cameroon" >Cameroon</option>
<option value="Canada" >Canada</option>
<option value="Cape Verde" >Cape Verde</option>
<option value="Central African Republic" >Central African Republic</option>
<option value="Chad" >Chad</option>
<option value="Chile" >Chile</option>
<option value="China" >China</option>
<option value="Colombia" >Colombia</option>
<option value="Comoros" >Comoros</option>
<option value="Congo" >Congo</option>
<option value="Costa Rica" >Costa Rica</option>
<option value="Côte d'Ivoire" >Côte d'Ivoire</option>
<option value="Croatia" >Croatia</option>
<option value="Cuba" >Cuba</option>
<option value="Cyprus" >Cyprus</option>
<option value="Czech Republic" >Czech Republic</option>
<option value="Denmark" >Denmark</option>
<option value="Djibouti" >Djibouti</option>
<option value="Dominica" >Dominica</option>
<option value="Dominican Republic" >Dominican Republic</option>
<option value="East Timor" >East Timor</option>
<option value="Ecuador" >Ecuador</option>
<option value="Egypt" >Egypt</option>
<option value="El Salvador" >El Salvador</option>
<option value="Equatorial Guinea" >Equatorial Guinea</option>
<option value="Eritrea" >Eritrea</option>
<option value="Estonia" >Estonia</option>
<option value="Ethiopia" >Ethiopia</option>
<option value="Fiji" >Fiji</option>
<option value="Finland" >Finland</option>
<option value="France" >France</option>
<option value="Gabon" >Gabon</option>
<option value="Gambia" >Gambia</option>
<option value="Georgia" >Georgia</option>
<option value="Germany" >Germany</option>
<option value="Ghana" >Ghana</option>
<option value="Greece" >Greece</option>
<option value="Grenada" >Grenada</option>
<option value="Guatemala" >Guatemala</option>
<option value="Guinea" >Guinea</option>
<option value="Guinea-Bissau" >Guinea-Bissau</option>
<option value="Guyana" >Guyana</option>
<option value="Haiti" >Haiti</option>
<option value="Honduras" >Honduras</option>
<option value="Hong Kong" >Hong Kong</option>
<option value="Hungary" >Hungary</option>
<option value="Iceland" >Iceland</option>
<option value="India" >India</option>
<option value="Indonesia" >Indonesia</option>
<option value="Iran" >Iran</option>
<option value="Iraq" >Iraq</option>
<option value="Ireland" >Ireland</option>
<option value="Israel" >Israel</option>
<option value="Italy" >Italy</option>
<option value="Jamaica" >Jamaica</option>
<option value="Japan" >Japan</option>
<option value="Jordan" >Jordan</option>
<option value="Kazakhstan" >Kazakhstan</option>
<option value="Kenya" >Kenya</option>
<option value="Kiribati" >Kiribati</option>
<option value="North Korea" >North Korea</option>
<option value="South Korea" >South Korea</option>
<option value="Kuwait" >Kuwait</option>
<option value="Kyrgyzstan" >Kyrgyzstan</option>
<option value="Laos" >Laos</option>
<option value="Latvia" >Latvia</option>
<option value="Lebanon" >Lebanon</option>
<option value="Lesotho" >Lesotho</option>
<option value="Liberia" >Liberia</option>
<option value="Libya" >Libya</option>
<option value="Liechtenstein" >Liechtenstein</option>
<option value="Lithuania" >Lithuania</option>
<option value="Luxembourg" >Luxembourg</option>
<option value="Macedonia" >Macedonia</option>
<option value="Madagascar" >Madagascar</option>
<option value="Malawi" >Malawi</option>
<option value="Malaysia" >Malaysia</option>
<option value="Maldives" >Maldives</option>
<option value="Mali" >Mali</option>
<option value="Malta" >Malta</option>
<option value="Marshall Islands" >Marshall Islands</option>
<option value="Mauritania" >Mauritania</option>
<option value="Mauritius" >Mauritius</option>
<option value="Mexico" >Mexico</option>
<option value="Micronesia" >Micronesia</option>
<option value="Moldova" >Moldova</option>
<option value="Monaco" >Monaco</option>
<option value="Mongolia" >Mongolia</option>
<option value="Montenegro" >Montenegro</option>
<option value="Morocco" >Morocco</option>
<option value="Mozambique" >Mozambique</option>
<option value="Myanmar" >Myanmar</option>
<option value="Namibia" >Namibia</option>
<option value="Nauru" >Nauru</option>
<option value="Nepal" >Nepal</option>
<option value="Netherlands" >Netherlands</option>
<option value="New Zealand" >New Zealand</option>
<option value="Nicaragua" >Nicaragua</option>
<option value="Niger" >Niger</option>
<option value="Nigeria" >Nigeria</option>
<option value="Norway" >Norway</option>
<option value="Oman" >Oman</option>
<option value="Pakistan" >Pakistan</option>
<option value="Palau" >Palau</option>
<option value="Panama" >Panama</option>
<option value="Papua New Guinea" >Papua New Guinea</option>
<option value="Paraguay" >Paraguay</option>
<option value="Peru" >Peru</option>
<option value="Philippines" >Philippines</option>
<option value="Poland" >Poland</option>
<option value="Portugal" >Portugal</option>
<option value="Puerto Rico" >Puerto Rico</option>
<option value="Qatar" >Qatar</option>
<option value="Romania" >Romania</option>
<option value="Russia" >Russia</option>
<option value="Rwanda" >Rwanda</option>
<option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
<option value="Saint Lucia" >Saint Lucia</option>
<option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
<option value="Samoa" >Samoa</option>
<option value="San Marino" >San Marino</option>
<option value="Sao Tome and Principe" >Sao Tome and Principe</option>
<option value="Saudi Arabia" >Saudi Arabia</option>
<option value="Senegal" >Senegal</option>
<option value="Serbia and Montenegro" >Serbia and Montenegro</option>
<option value="Seychelles" >Seychelles</option>
<option value="Sierra Leone" >Sierra Leone</option>
<option value="Singapore" >Singapore</option>
<option value="Slovakia" >Slovakia</option>
<option value="Slovenia" >Slovenia</option>
<option value="Solomon Islands" >Solomon Islands</option>
<option value="Somalia" >Somalia</option>
<option value="South Africa" >South Africa</option>
<option value="Spain" >Spain</option>
<option value="Sri Lanka" >Sri Lanka</option>
<option value="Sudan" >Sudan</option>
<option value="Suriname" >Suriname</option>
<option value="Swaziland" >Swaziland</option>
<option value="Sweden" >Sweden</option>
<option value="Switzerland" >Switzerland</option>
<option value="Syria" >Syria</option>
<option value="Taiwan" >Taiwan</option>
<option value="Tajikistan" >Tajikistan</option>
<option value="Tanzania" >Tanzania</option>
<option value="Thailand" >Thailand</option>
<option value="Togo" >Togo</option>
<option value="Tonga" >Tonga</option>
<option value="Trinidad and Tobago" >Trinidad and Tobago</option>
<option value="Tunisia" >Tunisia</option>
<option value="Turkey" >Turkey</option>
<option value="Turkmenistan" >Turkmenistan</option>
<option value="Tuvalu" >Tuvalu</option>
<option value="Uganda" >Uganda</option>
<option value="Ukraine" >Ukraine</option>
<option value="United Arab Emirates" >United Arab Emirates</option>
<option value="United Kingdom" >United Kingdom</option>
<option value="United States" >United States</option>
<option value="Uruguay" >Uruguay</option>
<option value="Uzbekistan" >Uzbekistan</option>
<option value="Vanuatu" >Vanuatu</option>
<option value="Vatican City" >Vatican City</option>
<option value="Venezuela" >Venezuela</option>
<option value="Vietnam" >Vietnam</option>
<option value="Yemen" >Yemen</option>
<option value="Zambia" >Zambia</option>
<option value="Zimbabwe" >Zimbabwe</option>
                              </select>
                    <label for="element_2_6">Country</label>
          </div>
                    </li>                    <li id="li_5" >
                    <label class="description" for="element_5">Work Phone </label>
                    <span>
                              <input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_5_1">(###)</label>
                    </span>
                    <span>
                              <input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_5_2">###</label>
                    </span>
                    <span>
                               <input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
                              <label for="element_5_3">####</label>
                    </span>
                    <p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
                    </li>                    <li id="li_22" >
                    <label class="description" for="element_22">Schedule </label>
                    <div>
                              <textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
                    </li>                    <li id="li_7" >
                    <label class="description" for="element_7">Profile Picture </label>
                    <div>
                              <input id="element_7" name="element_7" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_8" >
                    <label class="description" for="element_8">Portfolio image </label>
                    <div>
                              <input id="element_8" name="element_8" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_9" >
                    <label class="description" for="element_9">Portfolio image </label>
                    <div>
                              <input id="element_9" name="element_9" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_10" >
                    <label class="description" for="element_10">Portfolio image </label>
                    <div>
                              <input id="element_10" name="element_10" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_11" >
                    <label class="description" for="element_11">Portfolio image </label>
                    <div>
                              <input id="element_11" name="element_11" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_13" >
                    <label class="description" for="element_13">Portfolio image </label>
                    <div>
                              <input id="element_13" name="element_13" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_14" >
                    <label class="description" for="element_14">Portfolio image </label>
                    <div>
                              <input id="element_14" name="element_14" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_15" >
                    <label class="description" for="element_15">Portfolio image </label>
                    <div>
                              <input id="element_15" name="element_15" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_16" >
                    <label class="description" for="element_16">Portfolio image </label>
                    <div>
                              <input id="element_16" name="element_16" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_17" >
                    <label class="description" for="element_17">Portfolio image </label>
                    <div>
                              <input id="element_17" name="element_17" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_18" >
                    <label class="description" for="element_18">Portfolio image </label>
                    <div>
                              <input id="element_18" name="element_18" class="element file" type="file"/>
                    </div>
                    </li>
                        <li class="buttons">
                          <input type="hidden" name="form_id" value="836144" />
                    <input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
                        </li>
                      </ul>
                    </form>
                    <div id="footer">
                    </div>
          </div>
          <img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
          </body>
</html>

I'm afraid not.    It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
     <form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

How to make the text in sub-division

Hi,
I am usign text module in my adobe forms.
Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line.
While in pdf, all the sub-division combines and comes a single paragraph.
What would be the problem for this issue? Any Idea?
May I know how to make the text in sub-division as in text module?
Thanks,
Thiyagu
Edited by: Thiyagu on Oct 26, 2009 7:08 PM

Hello, experiment with Object - Field tab. Do you have your text field with "allow multiple lines" checked? I guess so. And what about the field format? Plain text or Rich text? Please try:)) Regards, Otto

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

How to make the following additions to the attached vi file?

Similar Messages

Maybe you are looking for