How to make the library visible IN AN EXTERNAL disk?

Hello.
Searched this forum (found about 25 identical questions and answers "how to make the library visible").
I turned mine and it is constantly visible now.
Before installing Lion made a bootable image.
When I connect the external HD, I see it in the Finder side bar, click on users>myname and the library folder doesn't show up.
Tried the 3 ways to make it visible but they all bring back and show the Lion's library on my MBP, not the one in the external HD.
Any ideas?
(BTW, I am just an "amateur user", not too heavy, so just, please take in consideration that if you explain to me slowly I will understand quicly)...
Thanks in advance.
Saul

Thank you Baltwo.
Don't I know you from CCC? (If judging from your answer I do, always hit the nail in the head)...
Yes, I guess I used the wrong terminology. Anyway, I did a bootable disk/image/clone, however it's called, with CCC (Carbon Copy Cloner), which BTW I am using for at least 3 years and saved several times my behind.
So, if I understood you right, you mean booting from my external HD and make the library visible (I don't remember if the clone was made after installing Lion or still while in Snow L, but will check).
I'll try and update here if it worked.
Thanks again and have a good evening.
Saul

Similar Messages

How to show the Library folder in an external hard drive

Hi there,
I am trying to restore the Skype Chat History to my new computer.
My old hard drive crashed and had to be replaced. Unfortunately my back-up Time Machine file was corrupted due to fact that this is a VERY EASY thing to happen and hence I DO NOT recommend that anyone uses Time Machine through a wirelessly connected hard drive, such as a Time Capsule - a very bad design flaw!
Luckily I am able to access some of the files on the old hard driave that was removed from my laptop. However I can not find a Skype folder or the Application support folder under my user name. Because it is an external drive, I can not use the techniques that have been suggested in other posts (such as using Terminal to permanently show the Library folder or using the Option key).
Can you please help me!?

Open a Finder window and choose the external drive with the user folder in the Finder sidebar. Then, make sure you see your user folder in the Finder window, because you will need it.
Now, open Terminal (in /Applications/Utilities) and type:
chflags nohidden
After typing that, press the Space key and drag your user folder from the Finder window to your Terminal window, and after dragging it, now type after the dragged folder (without space):
/Library
In Terminal you should see:
chflags nohidden (yourdraggeduserfolder)/Library
Finally, press the Enter key and the Library folder will show up

How to make my Library visible in open dialog?

I know how to get to my Library in the Finder, but how can I make it visible in an Open dialog? I want Disk Inventory X to scan it.

Which Mac do you have?
Which operating system is it running?
You posted in Mac OS X Lion 10.7 forum but you profile claims you have an eMac with a PowerPC and it is running 10.3.4.
Please straighten this out because they are two totally different computer and operating systems.

How to make the properties visible for a bean in IDE?

Hi,
I have a jpanel and have two buttons ,OK and cancel inside it.
I made this class as a bean, and put in the component palette of IDE.
Now when i click and drop that bean in a frame., and try to set the properties, the IDE will be giving me only the outer component which is a JPanel properties,
I want to work with the properties of inner components OK and Cancel.
How can i acheive this?

Yes, Write wrapper methods for the properties you are interested in. Introspection does not examine beans which are declard in a class in IDEs, IT only follows an inheritence tree.
So if you have a button and want it to be visible in your new bean, you will have to expose the properties of the bean again using wrapper methods. You could use the propertyChange model to notify the button on property changes.

How to make the buttons INVISIBLE in the Application toolbar

Hi All,
I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
Thank you in advance.
Regards.
Paddu.

Hi,
Try to use below in the PBO module status_0100 OUTPUT.
DATA t_fcode TYPE TABLE OF sy-ucomm.
refresh t_fcode[].
APPEND 'Function code name of the button' TO t_fcode.
Check the condition here for which you want to make field visible.
DELETE FCODE of the button from T_FCODE table
ENDIF.
SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

How do I fix my left shift key? Any open windows leave and make the desktop visible.

How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.

You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium

How to make the exe always visible in the illust application.

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
Regards,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make the exe always visible in the application window

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
Thanks,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make the last line of the textarea visible all the time?

Hello,
I am making an online chat application in JSP and XHTML. The chat log and online users� names textareas are refreshed every 5 seconds. When it comes to many messages in the chat log textarea, the scrollbar appears. Then, every time the chat log textarea is refreshed, I need to move the scrollbar down to see the last line of the textarea.
Are there any ideas how to make the last line of the textarea visible all the time without moving the scrollbar?
Thanks in advance.
Dan

I put the below code on the page, but it didn't work.
Are there any ideas? Thanks.
<table border="0" cellspacing="1">
<tr>
<th>Chat Log</th>
<th>Users now online</th>
</tr>
<tr>
<td><textarea rows="20" cols="60" name = "messages" readonly = "readonly"><%= texts %></textarea></td>
<td><textarea rows="20" cols="20" name = "names" readonly = "readonly"><%= names %></textarea></td>
</tr>
</table>
<script type="text/javascript">

</script>

How to make the list code visible?

Dear All Experts,
     How to make the list with A1 and so on visible?
     Pls refer to below screenshot:
Thanks!

Dear All,
     I already find it.
Thanks!

How can I make the points visible in Graph

HI,
I have a graph which plots certain points. I want the graph to also make the points visible - not just the lines between the points.
How can I do that
Thanks

Right mouse on the graph and select common plots. Under there you can select how you want to display your information. After selecting the display with points, you can go further down the list to Point Style to choose circles,squares etc....

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

How to make the vendor column have figure in GRIR line item with RE document type?

Dear Experts,
Could you tell me how to make the vendor column have figure in GRIR line item whose document type is RE?
Thanks!
Xinling Zhang

Hi ,
You are using FAGLL03 .
FAGLL03 report vendor code is blank
vendor number in new FAGLL03 tcode (offsetting account information)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&…
Also check OSS note
Note 112312 - Line item: Display of offsetting a/c information
Note 1034354 - FAGLL03: Display of offsetting account information
Many Thanks

How to make iPhotos library available to other users

how to make iPhotos library available to other users

To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support article linked below.
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

How to make the words of the menu bar on the top of the screen look bigger?

I am considering changing my 15.4'' to 17'', so I went to Apple store and took a look at the 17'' MBP, this machine is awesome and the display is set at 1900 X 1200, I realized that the words are smaller every where. While I know how to adjust the words below the icons to make it bigger, but I really don't know how to make the words bigger in the menu bar, in the menu bar of safari, menu bar every where, does anyone here know how to do it?

Yes, but it isn't here yet.
Sometime next year, Apple is supposed to enable the resolution independent version of the UI which will mean you can get easily readable stuff even with the much higher resolution monitors that are coming.
For now you have only two good choices: Use a lower resolution on the monitor or use the Zoom function of Universal Access (and pan the image around on the screen) to help with visibility.
--Bob

How to make the library visible IN AN EXTERNAL disk?

Similar Messages

Maybe you are looking for