How to Make the Name 1 field in cost center master data as compulsory
Hi,
We have requirement from the client to make the Name 1 field in the adress tab of the cost center master data as a compulsory field when the cost center master data is accessed through KS01, KS02 T code.
There is also existing cost center master data in SAP system for which NAME 1 field is blank. How the issue of the existing master data can be dealt if there are no data NAME 1 field in the existing cost center master data.
regards
Partha B
Hi
This path refers to exit COOMKS01.... (For Cost Center Enhancement using Custom fields)
For the above requirement, I belive COOMKS02 is the right one.... (Custom checks before saving)
Br, Ajay M
Similar Messages
-
"Region" field in Cost center master data needed as mandatory
Hello Gurus,
I would like to ask you where exactly in SPRO we can customize the field "Region" in Address tab in Cost center creation as a mandatory? so far its only optional
is this possible?
thanks in advance for your help.
HanaHey Hana,
According to [this thread|Re: KS01 , Field status Cost center master data;, you will need a user exit to accomplish that. -
Company code field in cost center master data
I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?
Hi MG,
Appearance of the field "Company Code" in cost center master data depends on the following point...
In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
I hope u got it...
Srikanth Munnaluri -
Remove Mandatory field in Cost center master data
Dear All,
I want to remove the mandatory person responsible in the cost center master data. How to do this
Regards
Vasanthahi Vasantha,
as far as I know, this is not possible. If a field is mandatory or not in cost center master data is determined by the system.
hope this helps
ec -
How to suppress business area feild in cost center master data urgent plzzz
how to suppress business area feild in cost center master data
Hi ,
Please check these notes
Note 606933 OKEON: Business area is no required entry field
Note 506308 OKEON: Business area financial statement prevents change
Note 422801 KS01 with template does not check business area
It might be possible to create a modification,.
Please assign points if it useful
Regards
Ravinagh Boni -
How to make the manual entry of cost center in MIRO
Hi
In MIRO, Cost center field is not populating for the PO without material and with the account assignment project P. I want the cost center to be populated in the MIRO screen.
In OLMRLIST screen cost center tab is not fixed. Once the cost center populates in the MIRO i can fix it.
Please let me know the detailed procedure of how to make the manual entry of the cost center in MIRO?
RajaHi,
If the PO is Account assigned PO then in MIRO you need to select the Layout as Account assigned -Costcentre, the system will change the Layout of the MIRO.
So on the line item of MIRO you will find the Account assignment arrow mark (just move rightside of the MIRO line item) press this arrow mark,
then system will take to other screen where you can enter the Manual entery to the Cost centre along with G/L account in MIRO
hope this solves your problem. To enter the cost manually you need to select the Layout as Account assignment -- Cost centre.
rgds
Chidanand -
Suppress business area field in cost center master data(KS01)
Hi
As the client is not using business area, he don't want the business area field to appear in the cost center creation screen(KS01).
Is there any work around to this
Regards
AravindHi Aitipamula,
Have you looked transaction code <b>OB65</b> to deactive the business area?
Also you can technically use transaction variant (t/code SHD0) to supress the field. For more information, please check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Can you explain me clearly how to make company code visible in cost center
can you explain me clearly how to make company code visible in cost center master data using tcode kmlv
Hi,
There is no way to activate the company code field. If your Controlling Area and Company Code have one to one Assignment, then Company code is defaulted from the Controlling Area. However, if multiple Company Codes are assigned to one Controlling Area, then Company Code becomes a mandatory field in the Cost Center master data
Also, in case you have multiple company codes assigned to one controlling area, please check the setting of the Controlling Area in Configuration and see if have selected "Cross Company Code Cost Accounting" . Also, check if you have assigned all the company codes to the controlling area
Regards
Mahendra -
Problem while changing Business Area in Cost Center Master Data
I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
1. The transactional data already exists for that cost center
2. The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
Can anyone help me in order to reslove this issue
Thanking in anticipation
Edited by: Arshad Iqbal on May 24, 2010 2:10 PMDear Dejan !!
Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
Thanks Once Again
Regards
Ch. Arshad Iqbal -
Multiple Analysis Period in Cost Center Master Data
Hello Experts
My client did the mass change of cost center master data through T.Code KS12. Here, few of the cost centers analysis (validity period is different) like cost center X - analysis period was 01.01.2008 to 31.12.9999, & Cost center Y - analysis period was 01.01.2011 to 31.12.9999.
Since he did the change (through T.Code KS12) w.e.f 01.01.2011 to 31.12.9999, few of the cost centers created the mutliple analysis periods at cost center level ( i understand this is SAP standard behaviour)
Now, if he choose the display of cost center - X through KS03, he is getting two analysis periods
(a) 01.01.2008 to 31.12.2010
(b) 01.01.2011 to 31.12.9999
However my client does not want to see two analysis periods in cost center master data.
Kindly advise is there any SAP standard procedure to revert back / SAP note which can coorect the same
Regards
Anil KumarIf there are no postings during that analysis period you can delete the same if not required to avoid the message.
I will test the same if any other solution is possible.
Regards,
Divraj -
How to make the Deprtmnt field in the cost center master data as required ?
Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
SureshHi Eli,
Thanks for the quick reply
while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in create mode itself.
thanks
regards
Suresh -
How to make the Profit Center Field Mandatory in Cost center Master Data
Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta -
How to make Department field in cost centre master data a required field?
Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
SureshHi Sursh
Create a transaction varinat through SHD0.
For the department field, activate the Requred check box field.
Then activate the variant.
Regards
SAP Student -
How to find the Names of Most costly Views or Most Time consuming views
Hi All,
I had a database consisting of almost 200 views,as a part of Optimization process i want to find out the most costlier views.How to do that.Actually i want the names of the VIEWS,so that i can optimize that.Can any one help me out?
I had one more doubt in our Database a view is created like view A( which is created by joining several tables).so do i need to add index on this view separately or does it take the index of the tables which i joined? And in our Database i had created
a VIEW which is derived from other views(the Joining objects are views not tables),so while i select recoreds from this views which is derived from other views it is taking a lot of time.Is tehre any problem with that?Please avoid such double post spread over several forums:
http://social.msdn.microsoft.com/Forums/en-US/bae4042a-10b8-4d12-aa46-88a05ea37a76/how-to-find-the-names-of-most-costly-views-or-most-time-consuming-views?forum=sqldataaccess
Olaf Helper
[ Blog] [ Xing] [ MVP] -
How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Hi,
how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Rg,
KarthikHi Kamal,
This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
Any other way to validate the enter a value also?
Rg,
Karthik
Maybe you are looking for
-
9.2 using low-resolution artwork
I haven't upgraded to 9.2 yet, but have been reading the forums here (and elsewhere). I see that 9.2 now uses thumbnails for the album art, which is of a lower resolution than what is actually embedded into the file. This really concerns me, as the a
-
OK to disconnect?? How do I get out of this mode?
My nano ipod is displaying a check mark and "OK to disconnect" on the screen but I can't get it to go back to the menu where I can see my Music Playlist. I did disconnect it from the MAC but the check mark and message are still there and I cannot get
-
Jar files need for Custom connector API app
hi all, I am doing an application regarding "Custom connector API", for doing the application I need "jdom,rome-0.6" jar files. kindly send these jar files it will be helpful to me. To do such custom connector API application any plugins must be adde
-
Hi We are facing an issue while doing CA project deployment. Deployment stuck at Applying phase. We tried with different projects but all are getting stuck in applying pahse of deployment. Can someone help me identifying the issue? Regards Raj
-
Advance table within advance table
Hi All, We are using Advance table within advance table. I problem is at the page rendering, I have to show advance table with all the inner table expanded. Please help me to achive this solution Thanks in Advance Vikram