How to make the new artistic brushes not be offset to the cursor?

Hi there!
I just upgraded to cs6 and have found everything to be great except for an offset problem I'm having with the artisan brushes like Round Point Stiff.
In CS5 the paint position (precise point) was in the middle of the brush tip icon.. now it's off to the opposite side of the brush icon. See image example.
I've tried to change my brush tip settings and Ive tried to make do with just using the precise icon instead but not knowing the rotation and angle of the brush witht he visual icon is very hard to pinpoint, especially if the stroke happens off to the left of my precise cursor.
In CS6
In CS5
Is there something I need to enable on my end or is this working as intended? Is there a way I can just hack it on m y end to revert it back to the way cs5 (and the rest of the brushes in the brush folder) work?
Thanks!

Oh yess orry. I want sure if it was a bug or not.
Here is the dxt diag if you need it http://dropcanvas.com/089qx/1
I'll see about them updates! Thanks

Similar Messages

Why is the new map update not as good as the old one

Why is the new map update not as good as the old one

Why is the new map update not as good as the old one

How to make a new page but without a button on the top of the menu?

so i could make a link from the text

*+....selected text to point+.* And then remove the new page from the navbar with the Inspector/Page/Page pane.
Click to view full size
OT

HT5622 i changed my apple id in my computer but the new id does not come up on the i phone when i need to log in

i changed my apple id on my computer on my i phone my new id does not come up and i cannot log into i tuenes

You can't without deleting those applications and downloading them from the new ID, which may require repurchasing paid applications.
(85560)

The new keynote will not allow adjustments in the tenths of degrees only single degrees?

You cant adjust the angle of a picture or anything by tenths of degrees in the new keynote

actually i just solved it. i deactivated File Sharing on the Mini, it complained that some users were still connected, reactivated, it took a good 30 seconds but then that seemed to do the trick....

Lo9st my computer. If I connect my iPod to the new will I lose wht is on the iPod or will it sync and put songs on the new computer

lost my computer. If I connect my iPod to the new computer will I lose what is on the iPod or will it sync ok and transfer the music to the new computer?

Not unless you choose the Erase and Sync option. However, you won't be able to transfer content from the iPod to iTunes via iTunes or sync any new content to it until you restore the iPod or choose the erase and sync option. So if you need to get the contents of your iPod moved over to your PC, see this older post from another forum member Zevoneer covering different ways to accomplish this.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guess

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?

rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked.

HT2534 How can I make a new iTunes account so I can use the computer to download music on my ipad

How can I make a new iTunes account so I can use the computer to download music on my ipad

Why not use your previous iTunes account (Apple ID)? Explain a little more, please.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to make a new section visible in the server published version

I use UPK 12 Client.
When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outline, the outcome includes the new section created.
When I do the exact same procedure, but choose to click Publish > server (which is set up for my UPK) > Publish entire outline, the outcome does NOT include the new section created, but everything else yes.
How to make the new section visible in the server published version?
Thanks!
Sille

Hi Sille,
Are you publishing over knowledge center? or is it publishing to a network drive? Once you check in the section save the module once and try again. See if it makes any difference.
best regards,
SD

I don't like the new itunes, how do I go back to a previous version. I find the new version is not user friendly.

I don't like the new itunes. It's not as user friendly as the previous versions. How do I go back to a previous version?

That sounds like the difference between the new Firefox home page '''about:home''' and the previous Google Search page which has '''GMail''' at the top if you used GMail.
You can change your home page so that it points to what you had before, which It would be something like:
* http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Note on Google pages
* They won't show GMail at the top until you have gone to GMail
Directions to '''reset your home page''':
* http://support.mozilla.com/en-US/kb/How to set the home page
More on Search and on Keyword Shortcuts
* [http://dmcritchie.mvps.org/firefox/search.htm Search and Substitution Shortcuts especially for Firefox users]
* [http://dmcritchie.mvps.org/firefox/kws.htm Firefox Keyword Shortcuts]
But I don't really understand why you or anyone else would want to use such a page for a home page, it is redundant. You have as many search engines as you want in the search bar, the default search is Google.
You can invoke '''GMail''', any search, any bookmark, any bookmarklet with a [http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcut] .
'''You're not stuck with how the toolbars have been changed''' in Firefox 4.0, '''this is Firefox''', you can '''customize''' it. That is why Firefox became so popular, you can customize it how you want it with Customize Toolbars, Extensions, Themes, Styles.
You can make '''Firefox 4.0.1''' look like '''Firefox 3.6.17''', see numbered items '''1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

Question
Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

Swarnava wrote: '''''Firefox 9 is Compatible with Norton 2011, 2012, 360 v5'''''.
This reads backwards, It is the other way as "Norton update is compatible with Firefox 9".

How to make the new artistic brushes not be offset to the cursor?

Similar Messages

Maybe you are looking for