How to make the page disabled or unvisible with specific password ?

I am student. I need your help in my assignment.
I have 2 main page called = call problem and call report. The call problem page only can access by operator and call report page only can access by manager with the specific paasword.
Did any body know how to disabled or invisible the page with the specific password ? Or have other method to do that ?
Thanks.

Hello,
You can create a Authorization Scheme 'operator' and 'manager'.
And then you attach the 'operator' and 'manager' authorization schemes to the pages 'call problem' and 'call report' respectively.
Regards,
G.

Similar Messages

  • How to make the Page UP and down work on a table control screen?

    Dear all,
    Can some one suggest how to make the table control screen work with Page Up and Page down controls.
    when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
    Regard,
    Vj

    Take this code as a referance:
    Sample code for vertical scrolling in PAI processing will look like this:
    MODULE user_command_XXXX INPUT. (XXXX is screen no.)
      CASE ok_code.
        WHEN 'P--'.
          CLEAR ok_code.
          PERFORM paging USING 'P--'.
        WHEN 'P-'.
          CLEAR ok_code.
          PERFORM paging USING 'P-'.
        WHEN 'P+'.
          CLEAR ok_code.
          PERFORM paging USING 'P+'.
        WHEN 'P++'.
          CLEAR ok_code.
          PERFORM paging USING 'P++'.
    *&      Form  PAGING
    *       Form to do scrolling for screen XXXX
    *      -->CODE   OKCODE value (P--, P-, P+, P++ )
    FORM paging USING code.
      DATA: i TYPE i,
            j TYPE i.
      CASE code.
        WHEN 'P--'. <table control name>-top_line = 1.
        WHEN 'P-'.
          <table control name>-top_line =
                  <table control name>-top_line - line_count.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
        WHEN 'P+'.
          i = <table control name>-top_line + line_count.
          j = <table control name>-lines - line_count + 1.
          IF j LE 0. j = 1. ENDIF.
          IF i LE j.
            <table control name>-top_line = i.
          ELSE.
            <table control name>-top_line = j.
          ENDIF.
        WHEN 'P++'.
          <table control name>-top_line =
                 <table control name>-lines - line_count + 1.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
      ENDCASE.
    ENDFORM.                               " PAGING
    Regards,
    Ravi

  • When the page will be load how to make the page blank in run time

    Dear
    when i will run the page the fields shoud come with blank Field.
    i want to make it in runtime.
    example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

    duplicate how to make the page blank field in runtime

  • How to make the page expired when user click back

    how to make the page as expired when i click back button on the browser.
    i want a better way.
    actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
    response.setheader is not working ...
    i have redirect when click back using
    <body onunload>....i call another page here.
    but it is not a good way.
    so pls help me to solve this problem
    using session or another good way

    Use this instead.
    Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE);

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • How to make the page longer

    I'm having an issue fitting everything I need into the space provided by the program. Is there any way to make the page longer in order to fit everything I need into it? Thank you in advance.

    Taffypro wrote:
    What is the best width setting so that my website appears to take up the full screen
    Gary ~ Apple's own design award-winning site at apple.com mostly has a width of *980 pixels*. Apple's developer guidelines for the iPhone/iPod touch say: "Safari on iPhone also sets the viewport width to *980 pixels*, the width of most webpages." And: "...if your webpage is less than *980 pixels* wide causing it to scale too small on iPhone..."

  • How to get the Page Number in CS3 with VB?

    Hi, Everybody
    I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
    For myStoryCounter = 1 to Document.Stories.Count
    Set myStory = Document.Stories.Item(myStoryCounter)
    For myWordCounter = 1 to myStory.Words.Count
    Set myWord = myStory.Words.Item(myWordCounter)
    myWordContents = myWord.Contents
    Rem ** How to Get the Page Number according to the Word ***
    Next
    Next

    > But I don't understand why Item(1) are set.
    because Word can have more than one parent TextFrame - when split across TextFrames
    only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
    > why Story.TextFrames.Count alway is 0, Is it bug?
    no - it's not bug
    in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
    but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
    in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
    robin
    www.adobescripts.com

  • How to make the active save-to-file with the data from GPIB ?

    Hello,,everybody !!
    I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
    Thank you in advance for anybody's help !!

    Thanks Dennis,
    I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
    16:40:33 54.24
    16:40:34 54.23
    16:40:35 54.24
    I want to get rid of the blank line in between.. Do you have the idea about it ?

  • How to make the Pager for table view as non editable?

    Hi,
    I am using an HTMLB pager for my table view .
    It appears as Page '1' of 2 for examle.
    But '1' is dispalyed in an input field.
    How do I make this input field as disabled.
    I just want to use the Vertical and horizontal indicators to traverse through the pages of the table view.
    I do not want the user to enter the page number ..
    Thanks,
    Sachin

    Look at SBSPEXT_XHTMLB sample, pages pager.bsp and pagerX.bsp.
    If you use the external pager, then you can specify a format where a text string will only be displayed without an inputfield for editing.

  • How to make the page blank field in runtime

    Dear
    when i will run the page the fields shoud come with blank Field.
    i want to make it in runtime.
    example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come,

    rakesh,
    af:panelformlayout
    see the naveeth comments.
    You are following a wrong design for your application.
    If there are no rows in the VO instance, show the message as 'There are no rows'.
    What is the use-case that you have - in order to do the same for all the pages in the application.

  • How to make the Printer deskjet 3940 compatible with Windows 7, home basic, 32 bits?

    I have HP Deskjet 3940 Printer. I recently purchased a Lenovo desktop( C320, 57-302429) which has Windows 7,home basic,32 bits operating system. The said printer does not work with the above computer. Please guide how to make this printer compatible with the above operating system.
    This question was solved.
    View Solution.

    1. Click the Start button, click Control Panel and double click Devices and Printers.
    2. Click Add a Printer.
    3. Select Add a local printer.
    4. Choose an existing USBx Local port, click Next.
    5. Click the Windows Update button.
    6. After the update finishes, search for the 3940 driver.
    7. click Next,Next,Next,Next,Finish
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How to make the Access Gate SDK work with Web Gate

    When we want control the display of one area in one page, we can define this area as one resource then control the access of it. But when the user has been authenticated in the application, how can we get the user session and then call Access Gate SDK to check if the user is authorized? The following is one utility class to archive it.
    * $Id: CreateUserAction.java,v 1.1 2005/10/11 23:19:34 jason Exp $
    * $Revision: 1.1 $
    * $Date: 2005/10/11 23:19:34 $
    * Copyright (C) 1972 - 2005, Oracle Co. All Rights Reserved
    * The program(s) herein may be used and/or copied only with
    * the written permission of Oracle Co. or in accordance with
    * the terms and conditions stipulated in the agreement/contract
    * under which the program(s) have been supplied.
    package oblix.view;
    import com.oblix.access.ObAccessException;
    import com.oblix.access.ObConfig;
    import com.oblix.access.ObResourceRequest;
    import com.oblix.access.ObUserSession;
    import javax.servlet.http.Cookie;
    import javax.servlet.http.HttpServletRequest;
    * @author zhoujian
    public class OblixUtil {
    private static String ObSSOCookie = "ObSSOCookie";
    private OblixUtil() {
    * Check if the user is Authorized
    * @param request
    * @param rescourceUrl
    * @return
    public static boolean isAuthorized(HttpServletRequest request,
    String rescourceUrl) {
    return isAuthorized(request, "http", rescourceUrl, "GET");
    * Check if the user is Authorized
    * @param request
    * @param resourceType
    * @param rescourceUrl
    * @param resourceMethod
    * @return
    private static boolean isAuthorized(HttpServletRequest request,
    String resourceType, String rescourceUrl, String resourceMethod) {
    try {
    ObConfig.initialize();
    ObResourceRequest resource = new ObResourceRequest(resourceType,
    rescourceUrl, resourceMethod);
    ObUserSession session = getObUserSession(request);
    return session.isAuthorized(resource);
    } catch (ObAccessException oe) {
    oe.printStackTrace();
    ObConfig.shutdown();
    return false;
    * Get the Oblix user session from the request.
    * @param request
    * @return
    * @throws ObAccessException
    private static ObUserSession getObUserSession(HttpServletRequest request)
    throws ObAccessException {
    String token = getCookieValueByName(request.getCookies(), ObSSOCookie);
    if (token != null) {
    return new ObUserSession(token);
    return null;
    private static String getCookieValueByName(Cookie[] cookies, String name) {
    for (int i = 0; i < cookies.length; i++) {
    if (cookies[i].getName().equalsIgnoreCase(name)) {
    return cookies[i].getValue();
    return null;
    }

    Couple of options. You seem have to taken the Access Gate based approach. I will throw this in any way and you can make a call which one you want to use.
    If its a web application you can control authorization based on Resource by defining policy in the Access Manager.
    You mentioned aout display of one area in one page. That should be driven off of User attribute or custom logic. If it is driven off of User attribute then you can return header variable and you can check in the code as opposed to writing custom access gate.
    Now if you do want to write custom access gate when the resource is already protected by a Web gate,
    you can get the ObSSOCookie from the users browser session.
    You can pass the URL to the IsAuthorized method and call.
    Now here you have to install the Access Server SDK on the server, create custom access gate and then write the code and deploy it on that server.
    THanks
    Ram

  • How to make the Installer place support files in specific folder

    Hi,
    I'm trying to use the LabVIEW2009 installer for the first time. I haven't used any earlier ones, so my understanding is limited. I have created a project and an executable and wish to direct the installer to place some groups of files in a number of directories other than the one in which the executable goes. On the Source Files page I can see a number of Folder descriptions in square brackets. I don't understand how to use these. Are they to be set up to point to specific directories? If so how?
    So far I have managed to create an installer which puts all the support files from the project in a single directory. My attempts to select a subset of files within the Project View window and place them in a separate directory were not allowed since they are treated as an indivisible group. Basically i don't know enough about the installer and my searches for information have only yielded very basic information.
    If anyone can help by supplying or pointing to more detailed information I'd be most grateful.
    Thanks
    George
    Solved!
    Go to Solution.

    Hi George
    This is from the LV help:
    Destination View—Specifies the location and directory structure of the files when they are installed. Select an item from the Project View tree and click the arrow button or drag the file to the Destination View tree to include it in the installer directory structure. You can drag multiple files at the same time. Click the buttons below the Destination View tree to add, remove, and rename folders in the directory. You also can right-click the folders and select a command from the shortcut menu.
    The folders in the Destination View directory that do not have an LV prefix correspond to Microsoft Installer (MSI) properties that install files in the following locations.
    [CommonAppDataFolder]—Files you include in this folder install to the Application Data folder.
    [CommonFilesFolder]—Files you include in this folder install to the Common Files folder.
    [DesktopFolder]—Files you include in this folder install to the Windows desktop of the current Windows user.
    [LVxxRTEDIR]—Where xx is the LabVIEW version currently in use. Files you include in this folder install to the folder of the Run-Time Engine for the LabVIEW version currently in use.
    [LVDIR]—Files you include in this folder install to the folder of the LabVIEW version currently in use.
    You can find a full list of the MSI properties here. Scroll down to "System Folder Properties"
    Best Regards
    David

  • How to Make the Win7 Enterprise ISO work with Boot Camp?

    Hey...
    So I've acquired a new MBA. I didn't really want to considering all the issues out there (of which so far the volume fluctuation issues applies to me as well), but on Friday I need to bring some kind of laptop with me on a trip to record a song for a wedding next month. And for that, to make it worse, I need Winblows.
    So I got the Windows 7 Enterprise evaluation ISO. I let Boot Camp modify it and write it to a USB stick.
    But when I boot into the thing, I never get to actually install Windows, because I get "Install Windows": "Windows Setup encountered an internal error while loading or searching for an unattend answer file."
    What to do??!?!!

    Hmmm... That's strange!
    Seems there are some differences between DVDs for Windows 7 that the Apple tool doesn't know how to handle?
    The image I used to install with was the "7600.16385.090713-1255_x64fre_client_en-us_OEM_Ultimate-GRMCULXFREO_EN_DVD.iso " one — I believe I downloaded this from Microsoft at some point when they had it up for developer trials or something?
    The MD5 sum of that image is dad9f7a0b4d5d928a6a67ba6cd896350. You can check yours in Terminal by writing "md5 <path to your image file>".
    Perhaps if yours is different, you can find that other image online somewhere.
    HTH

  • Anybody know how to make the upgrade kit remote work with Vi

    I have a X-Fi extreme music & an upgrade kit.{ remote & receiver} The remote will allow me to select music tracks under the the entertainment center, but will not control the volume. I can push +-or - volume all day long, but it always says 00% and dosn't change in intensity. Any Ideas?

    Hi
    I take it you have used the youp-pax software? If not, then do so. Install revision 2. I did this and my remote is fully working once more.
    Must admit I am a little annoyed creative did not provide a link to youp-pax for people wanting to update their drivers. They could have said it was use at your own risk etc, but instead I had to waste two weeks fiddling with vista until I discovered it.
    /rant off

Maybe you are looking for