How to make the recovery after a windows installation

Please I have a toshiba satellite m645 and I already can see the hdd partition but the problem is how to make it run. I just tried pressing F11 and nothing happens.
The problem is that I made a new installation of windows 7 but I didn't delete the hdd partition.
Someone who help me i will really apreciate
Thank you

se37 > clear the field of the function module name
menu path: Function module > test > test sequence and give you FM's sequence you want to test

Similar Messages

How to make the Commit after calling a BAPI from SE37 ?

Hi
When i use a BAPI for update some SAP table i always call the BAPI inside a program and then i call the BAPI_TRANSACTION_COMMIT for made the changes and validate them
Bot now i need to test the BAPI directly in SE37 , and the BAPI returns the sucess message but i can not see the changes in the SAP tables , i guess i need to make the Commit but how can i do this ?
by calling the BAPI_TRANSACTION_COMMIT directly in SE37 after the call to the other BAPI ?
Thanks
Frank

se37 > clear the field of the function module name
menu path: Function module > test > test sequence and give you FM's sequence you want to test

How to make the Command Prompt F7 window wider?

The F7 command prompt history window is a gem. is there a way to make the window wider so you can see the entire command line?
jwh

You could ask them over here.
http://answers.microsoft.com/en-us/windows
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprogeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to make the icons bigger in windows 8.1 64bit?

i'm the new user of cs6.
when I open the AI or photoshop, the icons are too small in left and right side.
i tried to change the revolution but it still nothing change.
anyone can help me?

You are using a High Resolution display. Support for such displays are in Photoshop CC 2014 Windows where the UI size can be increased by 200%.
As of now nothing can be done for CS6.
Gene

How i make the partitions in my hard and when make recovery windows not deleted

i hope find solution for it i have windows 8 recovery in my laptob that have harddisk 1000 gigabite
i want make the (c) partion and the recovery partion and 1 other partion i make it but when i make the recovery the windows back my partions to the rest so i want to make the recovery without rest my hard and remove my files for example in my new partion (d)
i make that new partion and put all my data on it but when i renistal my recovery windows it delete the partion and my data so i hope find solution to how let my laptop not remove that partion and the data on it
thanks

the partion i want make i don't want the widnows remove or delete files on him when i make backup the recovery

After clicking on an open tab, how to make the focus automatically go to the body of page?

After clicking on an open tab, how to make the focus automatically go to the body of page?
Right now, clicking in an open tab and using arrow keys now moves through the open tabs. I liked the old versions where right after clicking in a tab you could directly go to navigate the page with the arrow keys.
Is there a something I can change in about:config to change this behavior?
Thanks in advanced.

Firefox should still set the focus the the browser area if you click a tab. 
Only with very old browser versions you could set the focus to a tab by clicking a tab.
This behavior is likely caused by an extension.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

How to make the exe always visible in the application window

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
Thanks,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
Do reward each useful answer..!
Thanks,
Tatvagna.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to make the delivery cost changeable after cancellation of GR?

Create a PO (with Delivery cost), then GR (101) , then cancel the GR (102), but the delivery cost still cannot be modified eventhough the GR has been cancelled - how to make the delivery cost changeable after cancellation of GR?

Hi
"You are not allowed to add new delivery costs in a purchase order once goods receipt has been carried out as these would then be proposed in the invoice verification. The related posting to the clearing account for goods receipt and invoice receipt would not then balance, if no further goods receipt took place.
After the invoice has been received successfully, it is not possible to change the delivery costs in the order. This is because information necessary for problem-free operation is no longer available for the delivery costs that have already been posted for subsequent reversals or invoices, or the operation can no longer be done without errors.
It is also not possible to change delivery costs for stock transfers with SD shipping after goods have been successfully issued, as this can lead to errors during cancellation."
I think you have to delete the line item and create a new line item with revised delivery conditions..
MRao

I merge projects in aperture, it works fine until aperture restarts. After aperture restarts, the projects are no longer merged, and are back the way they were. Can anyone suugest how to make the merge permanent?

I merge projects in aperture, it works fine until aperture restarts. After aperture restarts, the projects are no longer merged, and are back the way they were. Can anyone suugest how to make the merge permanent?

I tried the first aid tasks but the issue is still there. I have more info now though. It's not a problem with merging.
The problem is that new projects are being generated everytime aperture starts (with the same name, ie 01, 02.... and 01 (1), 02 (1) .....)
When aperture start, it shows "importing". When I click on importing, it goes into the activity box. In the activity box, has many lines as below. The added projcts are all empty. It's annoying because i have many useless projects being generated.

How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

How to make the calculation or formula in bottom of the coloum

How to make the calculation or formula in bottom of the coloum in Discoverer report.
Regadrs
Manikandan

Hi Ros
You have a couple of issues, one that is simple to resolve and one that is not so simple.
First, the simple one - the word TOTAL. To alter the word that Discoverer inserts next to a total, or to even remove the word altogether, use this workflow:
1. Right-click on the total and from the pop-up menu select Edit Total
2. At the bottom right-hand corner of the Edit Total dialog box is the area where the label is maintained. You will see a checkbox for the label
3. If you uncheck the label you can change the label to anything you like, including nothing
4. After you have set the label, click OK and close the Edit Total dialog box
Note: In Desktop, this is done via a drop-down from the Total dialog box. If you click the drop-down, the last item in the list is called Generate Label Automatically. If you uncheck this you can create your own label.
Your second issue concerning the non-totaling of the grand total on some items means that there is something preventing one or more of the totals from calculating. First of all, try to determine which item or items is causing the problem by adding individual totals to each of the desired columns. You will eventually find the column which has the culprit. If you use the above workflow to suppress the display of any labels your total line will look as though you have totaled all items.
Next, having found the column that will not total, try to figure out why the values will not add up. Could the column be a calculated item? If so, it is possible that you have used SUM on the outside of the calculation, like this:
SUM(some item - some other item) - this will not total if the original items themselves are in the query and are also being summed. This is because you are mixing aggregate and detail items within the total.
Try changing the formula like this:
SUM(some item) - SUM(some other item) and see if this helps.
If this is not the cause then try changing the formula for that column's total to CELL SUM instead of SUM. This causes Discoverer to literally add the values in the column.
If this is not the cause, could you possibly be trying to total repeated values? By default, this is disabled in the later versions of Discoverer. The repeated values will be caused if you have multiple joins in your query and the item that you are totaling is from the many end of a one to many relationship. Suppose you had items from a header table and line table in the same worksheet with there being multiple lines for the same header, and now let's say you have a column which is returning something from the header. That value will get repeated and if you try to total it would generate the wrong answer, hence out of the box Discoverer is trying to protect you from yourself.
However, it could be that the column really should be totaled but because Discoverer has detected a one to many join it will not total that column. To prove that this is the reason, change the join from a one to many to a one to one. Don't worry, this won't stop the query from working. If this allows the total to work then you can either leave the join as it is with a one to one, which won't harm Discoverer or you can edit the pref.txt on the server and change one of the preferences.
The preference I would change is called AllowAggregationOverRepeatedValues. By default this is disabled and will be set to 0. Changing this to a 1 will now tell Discoverer that repeated values can now be totaled. Don't forget to apply the preferences correctly by execiting applypreferences.bat, on Windows or applypreferences.sh, in Linux or Unix, and then stopping and restarting the Discoverer server.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Recovery after installing Windows 10

Hi, I'm currently on Windows 8.1. I have some questions before upgrading to Windows 10 : 1- How can I make a recovery in Windows 10 if I have a problem, a virus... ? 2- Do the recovery partition will be usable in Windows 10 ? 3- Could I make a recovery to restore Windows 10 with all drivers/preinstalled sofwares ? Thanks

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you want to know some information about the Windows 10 upgrade before you go ahead with it. Here are the documents for you to read over. They have all the answers to your questions. 1. Obtaining HP Recovery Discs or an HP USB Recovery Drive - HP provides a recovery solution on the hard drive, but it is still a good idea to have a recovery solution on a USB storage device or discs. A disc or USB device can be stored in a safe place and used in the event of a hard drive failure, a hard drive format, or in the event you change the operating system. 2. Backing Up Your Files (Windows 10, 8) - File History automatically backs up files that are in your libraries, contacts list, favorites, and on your desktop. If the originals are lost, corrupted, or deleted, you can restore one file or all the files. You can also find previous versions of your files from specific dates. 3. HP Notebook PCs - Upgrading to Windows 10 - Upgrade your notebook to Windows 10 from Windows 8.1 or Windows 7 using the instructions in this document. This document also has many different categories with information that should be very helpful given the questions you are asking before making the Windows 10 upgrade. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. Not all drivers are available just yet. Updated Windows 10 drivers will become available and be released as they become available to HP. Have a great day!

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to make the recovery after a windows installation

Similar Messages

Maybe you are looking for