How to make the selection screen field names to apper as in logon language

hai
the selection screen field names should appear
as that of logon language
and <u>before that once i logon with a language
it should pop up the (some)message in the logon language</u>.
For the selection screen filednames to appear as that
of the logon language whether i have to maintain the textelements for all screen fields in all possible languages or i have to write only in english and tell mentioning it to change

In <b>SE38</b> --> Goto --> Translate.
Choose target language, and start making the translation -;)
Greetings,
Blag.

Similar Messages

How to make the Selection Screen fields Invisible..?

Hi All,
I have a selection screen in which I have 2 Radio Buttons and 2 Blocks(with input fields).
The requirement is when the Radiobutton1 is selected, it should display the BLOCK1 and the BLOCK2 should be Invisible. The same way, when the Radiobutton2 is selected, it should display the BLOCK2 and the BLOCK1 should be Invisible.
Could someone help me how to do this. Please share your valuable inputs. If anyone has some sample code, that would be greatful.
Thanks in advance.
Thanks & Regards,
Paddu.

Please search the forum. This question has been asked and answered many times before.
Rob

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen fields on reprt output

Hi,
     I would like to know, which function module is use to diplay the selction scrren fields on the report output.
For e.g:
              on selction scren I have two select options.
     1. Company Code : 0000 to 9999
     2. Fiscal Year       : 2005 to 2008
I need to display these fields on the Report ouput, so that I can know that what selection criteria I have entered on selction screen.
Thanks & Regards
Chetan Chauhan.

Hi Chetan,
Lets say u have selection criterion as
*SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : pa_werks LIKE vlcvehicle-werks DEFAULT 'XXX' OBLIGATORY,
             pa_date LIKE sy-datum DEFAULT sy-datum.
SELECT-OPTIONS : so_vbeln FOR vbrk-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
Put a selection on that criterion according to selection screen,
Fill in a internal table.
Write itab-field1, field2.
Also use ABAPDOCU a tcode where u can find many demo programmes for all topic.
Reward points if useful.
cheers
Mohinder Singh
Cheers
Mohinder Singh Chauhan

Want to see the previous file name in the selection screen field

Hi,
I am working with flat file upload. Now my problem is in the selection screen field when i press space bar or backspace i want to see the previous file path which i have taken before. How to do this functionality.
Thanks in advance,
Vijay.

Hi,
Hope the following code will help u.
PARAMETER: in_file type ibipparms-path MEMORY ID FID.
at selection-screen on value-request for in_file.
call function 'KD_GET_FILENAME_ON_F4'
    exporting
      mask      = ',CSV,*.csv,'
    changing
      file_name = in_file.
But here when u give a path and execute and come back or executing it again the previous path will automatically come to the in_file field.
Just check this code.
Thanks.

How to assign F1 help to the selection screen fields

Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha Singuru

Hi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END   OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
    WHEN 'HELP'.
      CASE CURSORFIELD.
        WHEN 'S_MATNR-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MATNR-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
        WHEN 'S_MTART-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MTART-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
      ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to make the Profit Center Field Mandatory in Cost center Master Data

Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.

Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta

How to disable the Selection screens of LDB's ?

Hi,
How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Predefined LDB?
Thanks & Regards,
Gopi.

Hi Gopi,
Go through the link,
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Regards,
Azaz Ali.

How to Increase the Selection screen window length width big....

How to Increase the Selection screen window length width big.... I cant able to do some enter text... because of the window size it gives error... can anyone help me out this...
Thanks in advance

hi,
Maximum size is fixed for selection-screen.
Split your text into different lines to fit it.
Create a text element for your text and write it as comments.
selection-screen begin of block b3 with frame title text-041.
selection-screen begin of line.
    parameters : p_all radiobutton group g2 default 'X'.
    selection-screen comment 10(75) text-049.
selection-screen end of line.
selection-screen begin of line.
    parameters : p_iloc radiobutton group g2.
    selection-screen comment 10(75) text-050.
selection-screen end of line.
selection-screen end of block b3.
Regards
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How to make a selection screen two fields obligatory

Dear friends...
   I wish to know how i make two fields obligatory in the selection screen
like
   select-options Po_Num for ekpo-ebeln obligatory.
   select-options Po_Date for ekko-aedat.
   select-options Material for mara-matnr.
in the above example i am looking for po_num and po_date both obligatory but if i dont enter data in the po_num, po_dat becomes obligatory and po_dat has no data entererd po_num is obligatory. i wish to know how i achieve single field act as a obligatory in absence of another field. please help in this regards..
thanking you,,,
regards.
Naim

REPORT ZMM_COMP_POS no standard page heading line-size 225
tables: ekko, ekpo, mara.
data: begin of i_ekko occurs 0,
      ebeln like ekko-ebeln,
      ebelp like ekpo-ebelp,
      matnr like mara-matnr,
      aedat like ekko-aedat,
      waers like ekko-waers,
      ernam like ekko-ernam,
      end of i_ekko.
data: begin of i_ekpo occurs 0,
      ebeln like ekpo-ebeln,
      ebelp like ekpo-ebelp,
      matnr like mara-matnr,
      aedat like ekpo-aedat,
      waers like ekko-waers,
      menge like ekpo-menge,
      meins like ekpo-meins,
      ernam like ekko-ernam,
      lgort like ekpo-lgort,
      netwr like ekpo-netwr,
      recd(16) type p decimals 3,
      rec_val(16) type p decimals 3,
      end of i_ekpo.
data: lines type i.
data :itab_output like i_ekpo occurs 0 with header line.
data: itab_output3 like standard table of itab_output .
data data.
data total like sy-dbcnt.
data recd(16) type p decimals 3.
data rec_val(16) type p decimals 3.
data : it like i_ekpo occurs 0 with header line.
selection-screen begin of block b1 with frame title text-010.
select-options Po_Num for ekpo-ebeln .
select-options Po_Date for ekko-aedat.
select-options Material for mara-matnr.
selection-screen end of block b1.
at selection-screen.
if po_num[] is initial
and po_date[] is initial.
message e001(00) with 'Make at least one entry'.
endif.
start-of-selection.
if PO_NUM is initial and
     Po_Date is initial or
     Material is initial.
         select ebeln ebelp matnr
                menge meins netwr
                aedat
                from ekpo
                into corresponding fields of table i_ekpo
                where ebeln in Po_Num.
endif.
        loop at i_ekpo.
              select ebeln aedat waers ernam
                     from ekko
                     into corresponding fields of table i_ekko
                     where ebeln in Po_Num.
              if sy-subrc = 0 .
                 i_ekpo-aedat = i_ekko-aedat.
                 i_ekpo-waers = i_ekko-waers.
                 i_ekpo-ebeln = i_ekko-ebeln.
                 i_ekpo-ernam = i_ekko-ernam.
                 modify i_ekpo transporting ebeln aedat waers
                                            ernam
                                            where ebeln = i_ekko-ebeln.
                 clear i_ekko.
               endif.
           endloop.
           describe table i_ekpo lines lines.
           if lines le 0.
              message e017(zk).
           endif.
      select ebeln ebelp matnr
             menge meins netwr
             werks
             from ekpo
             into corresponding fields of table i_ekpo
             for all entries in i_ekko
             where ebeln = i_ekko-ebeln .
      sort i_ekpo by ebeln ebelp.
      sort i_ekko by ebeln.
      loop at i_ekko.
        read table i_ekpo with key ebeln = i_ekko-ebeln.
        if sy-subrc = 0.
                 i_ekpo-aedat = i_ekko-aedat.
                 i_ekpo-waers = i_ekko-waers.
                 i_ekpo-ebeln = i_ekko-ebeln.
                 i_ekpo-ernam = i_ekko-ernam.
           modify i_ekpo transporting ebeln aedat waers
                                      ernam
                                      where ebeln = i_ekko-ebeln.
       endif.
    endloop.
describe table i_ekpo lines lines.
if lines le 0.
    message e017(zk).
endif.
loop at i_ekpo.
   write:/1 sy-vline,
       (5) i_ekpo-ebeln left-justified ,sy-vline,
       (10) i_ekpo-ebelp left-justified ,sy-vline,
       (15) i_ekpo-aedat left-justified ,sy-vline,
       (18) i_ekpo-ernam left-justified ,sy-vline,
       (23) i_ekpo-matnr left-justified , sy-vline,
       (27) i_ekpo-menge UNIT i_ekpo-meins left-justified , sy-vline,
       (29) i_ekpo-meins left-justified , sy-vline,
       (31) i_ekpo-netwr CURRENCY 'INR' left-justified ,sy-vline,
       (33) i_ekpo-waers left-justified ,sy-vline.
endloop.
   write:/(743) sy-uline.
top-of-page.
    write:/30 'ESSAR CONSTRUCTIONS LTD.' color 6 inverse.
    write:80 'DATE :' color 6 inverse, sy-datum color 6 inverse.
    new-line no-scrolling.
    write:/30 'PO Details.' color 7 inverse.
     write: /(743) sy-uline.
format color col_heading on.
     write:/1 sy-vline.
     write: (5) 'PO no.',sy-vline,
           (10) 'Item no.',sy-vline,
           (15) 'PO Date' color 1,sy-vline,
           (18) 'PO Created By.',sy-vline,
           (23) 'Material No.', sy-vline,
           (27) 'PO Quantity', sy-vline,
           (29) 'PO Unit', sy-vline,
           (31) 'PO Value',sy-vline,
           (33) 'Currency' , sy-vline.
    write:/(743) sy-uline.
    format reset.

How to customize the selection screen of Get Objec

hi all,
I'm developing a program for sap hr.
I use the 'Get objec' to creat the selection screen.
and I wanna limit the date selection.
The defaut display is the 'Period' of radio-button group.
and I want only the single field 'Date' for input insead of a period with starting and ending dates (manuelly we need click on a button to switch to 'Date' input).
How can I switch automatically to the 'date' when I initilize my program?
Thanks a lot for your help
Yimin

Hi,
This is possible through program attributes.
goto attributes, click on 'HR Report category'
now make sure that, 'Master Data (Infotype)' is changed accordingly your requirement.
I think it is helpfull to you.
Regards
Sai

How to change standard selection-screen fields

hi i am kishore.
i have requirement.
i have to change selection-screen label purchase order to purchase docuement in request for quatation.
pls suggest that how to change the standard selection screen field labels.

Hi.
This is possible.
Just try out this way.Heres is an example.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
    program                           = 'ZESO_TEST'
tables
    seltexts                          = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND                 = 1
PROGRAM_CANNOT_BE_GENERATED       = 2
OTHERS                            = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks and regards,
Maheshwari.V

How to make the selection screen field names to apper as in logon language

Similar Messages

Maybe you are looking for