How to make the SQVI through the linking of 4 tables

I have a document no.i.e.9300801724.
I am getting the Internal No ( DOCNO ) from J_1IPART2 by put the doc.no.9300801724,then,I am putting the Internal no. ( DOCNO ) into J_1IPART1 and get the output of Material Document (MBLNR).Third,I am using the table,SE16-MSEG,and getting the Purchase Order (EBELN ) by given the input of Material Document i.e. already got from J_1IPART1.Now,I want to make the SQVI of all these 3 tables with including a new table of BKPF sothat I could get document no. ( BELNR ) from BKPF.
Now,the summary are:-
1-J_1IPART2
Input-FAWREF Output-DOCNO
2-J_1IPART1
Input-DOCNO Output-MBLNR
3-MSEG
Input-MBLNR Output-EBELN
4-BKPF
Final output should be BELNR
Is it possible to get all the datas from making the SQVI of above 4 tables?
Regards
Pradeep Kumar Gupta

Hi,
This can be achived through info set query. Below are the steps to create the info set query.
1. first create SQ03 user group to which query will be assigned
2. create infoset SQ02 and select the table and fields required for the output but ensure that there should be common field in each table you are using. system will show you the graphical display of table linkages.
3. Assign usergroup to infoset
4. Create query using SQ01 system will prompt you to select the info set and user group created in the above steps to select.
5. Give the desired name in description and select the basic list icon to select the field that need to be displayed in the output.
Hope it is clear and useful
Regards,
JB

Similar Messages

TS1702 I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through

I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

How to make JDev aware of the xmldb API

Hi everybody,
I am a real beginner in Jdev, and I have to develop a
Java Application using Oracle Java developer, against
an XML-native database called eXist. I'll have to use
a java API called xmldb supported by eXist in order to
interact with the database. Although I have basic
knowloedge in Object-oriented programming, but I don't
know where to begin, especially how to make JDev aware
of the xmldb API, and how to create classical
application components (Windows, buttons, etc).
Could you help me with some orientations and
interesting links?.
Thanks a lot.
Mounir.

Hi,
don't know this database, but the database vendor should be able to explain how his DB is accessed from Java. If this requires libraries, then the vendor will provide these in JAR files, which you then configure with JDeveloper (as a custom library Tools --> Manage Libraries) or in the Project
If there is a JDB driver for it, even better. This however is not a deliverable of JDeveloper but the database vendor
Frank

How to make Nokia Suite remember the position and ...

how to make Nokia Suite remember the position and the size i set it?
because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
Nokia Suite 3.3.86
Windows Vista
Greece Nokia X6 RM-559 v40.0.002

Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

السماح بالكتابة بحسب النطق الصوتي I want to be all the downloads through the program IDM How do I add that option to download? i have already tried to right-click of the mouse?

السماح بالكتابة بحسب النطق الصوتي
I want to be all the downloads through the program IDM How do I add that option to download? Has already tried to right-click of the mouse?
''duplicate - ''

Make sure that you have IDM 6.07 build 15?
* go to '''about:addons''' - extension and check that IDM CC is enable or not
* if all are up to date and enable, then IDM should start download autometically

How to make text start at the top of a page in livecycle 9

Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
Thanks,
David

To set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
Good Luck,

How do I connect my MacBook pro to the Internet through the 3G server on my iPhone?

Does anyone know how to connect my MacBook pro to the Internet through the 3G server on my iPhone?

There is a service called Personal Hotspot that uses your iPhone's connection to share with other devices. You will need to sign up for this service through your carrier. Good luck

I subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music

i subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music - i think it keeps trying to find on the external harddrive where i used to keep my music

Of course iTunes is looking for the music on the external HDD. Enabling iTunes Match does not magically change the location of the iTunes library to the cloud.
To play the music either plug the external HDD back into your computer or create a new, empty library to use for streaming the iTM content. The latter can be accomplished by holding down the Option key when launching iTunes, choosing "create library" then enabling iTunes Match on the new library. DO NOT have iTunes scan your HDD for music.

How to make a restart of the workflow in a process controlled workflow?

Hi Experts,
How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
Thanks and regards,
Ranjan

Hi,
Restarting workflow goes to 1st level approval step. It is not requester.
I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
Regards,
Masa

How to make a backup if the Storage & Backup icon is missing?

how to make a backup if the Storage & Backup icon is missing?

http://www.apple.com/icloud/setup/ios.html
Sounds like you have an account, so two options I would say.
Try turning it off, then off and see what options you get, or sync your phone to iTunes and click on the summary and choose the iCloud option.

How to make every account in the system login automatically?

How to make every account in the system login automatically when Mac OS X startup?
Thanks!

I can see one way to do it. You'll need to install a script in each user account, and have it set as a login item for each user. Let's imagine you have three user accounts. Each user in Mac OS X has a UID number. Normally your first user has the UID of 501, the second one will be 502 and so on...
You can determine the UID by running the following AppleScript while logged in on each user:
do shell script ("ID")
This'll return a long block of text, but right at the start you'll see the UID number. Let's assume your three users have the UIDs 501, 502 and 503. We begin with 501.
Create the following script and save it as an application while logged in as 501. Note that the password you're entering is the password for UID 502. Also note that the forum system is creating line breaks where there shouldn't be any. The long "do shell script" line should be one line.
delay 5 --This delay allows time for login to complete, but it may not be necessary.
try
do shell script "/System/Library/CoreServices/Menu\\ Extras/User.menu/Contents/Resources/CGSession -switchToUserID 502"
delay 5 --This delay could be shorter or longer, depending on how fast your machine is.
tell application "System Events"
keystroke "password for 502" --the password for UID 502
keystroke return
delay 1
end tell
on error
display dialog "Unable to switch user."
end try
Open System Preferences, go to Accounts, click "login items" and drag your script (saved as an application) to the login items window.
You basically repeat this process for each user account, modifying the script so it switches to the next user.
This isn't ideal, because your passwords will be stored in the scripts, and each user could open the scripts and learn the passwords of the other users on that machine.
I picked some of this up from a discussion over at the Macworld forums:
http://hints.macworld.com/article.php?story=20031102031045417
Message was edited by: The Preacher
Message was edited by: The Preacher
Message was edited by: The Preacher

HT4623 How to make Google Maps as the default Map App in my iPhone 5

How to make Google Maps as the default Map App in my iPhone 5, so that I could still use the old bookmarks and use the pins to drop, Please assist.

You cannot make Google Maps the default mapping app.

How to make Excel, Word, Powerpoint the Default programs?

Hey guys,
Just got my new MBP, and I need to know how to make Excel, Word, Powerpoint the default programs when opening one of their files? Currently, the trial version of Iwork opens the programs which drives me crazy.....
So, for example, for an Excel file, I want Excel to open it, NOT Numbers......etc....
Thanks In advance.
JW

Select a file of that type in the Finder, choose Get Info from the File menu, change the Open With entry for it to the desired application, click on Change All, and confirm the action.
(47808)

How to make the SQVI through the linking of 4 tables

Similar Messages

Maybe you are looking for