How to make the text flow in a table from on page to the next?

hello,
i wanted to know if its possible on pages to make a table so the text will flow from one page to the next?
(for example, i write a content in the column on a specific raw, and if still have text when i reach the margins of the page, it automatically continues the text on the SAME raw on the next page)
i couldn't imagine i would ask this, since this seems to be a default on Word, but i hope i explained it right, but just in case, ill add a picture to illustrate (notice that in raw 10 there is still text, its just continues and disappears, without flowing to the next page. on the next page it is just a new raw 11, and i wonder if its possible to make the remainder of the text from raw 10 flow to the next page)
*and I'm new in mac, so please be as specific as possible
thank you

thank you Jerry,
i did not understand where is that option you mentioned, because it seems that is exactly what i need!
ill will add some snapshot to show you my "Format" and "Arrange" properties, because i couldn't find it
*the only place i could find what you saying is on the right side of the screen, there is the "arrange" tab, but there "move with text" and "inline with text" were selected from the beginning

Similar Messages

How do I get text to flow from one page to the next in Pages 5?

How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

MOVED: how to make a good flow in the case?

This topic has been moved to Off Topic Technical.
how to make a good flow in the case?

Browser variation is something we must all deal with. For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid). Then get a CSS Layout that meets your requirements.
PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
http://www.projectseven.com/products/index.htm
CSS Layout Magic (commercial extension for Dreamweaver)
http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make a text "drawer" in iWeb

Does anyone know how to make a text "drawer" in iWeb? What I mean is when you click on a hyperlink to read more text, but instead of opening up a new page, it makes the text appear below the link on the same page.

Anything fancy with iWeb has to be done in the HTML Snippet or after publishing the page.
Find the code for the drawer, apply it and show us the result.
Perhaps not the drawer you had in mind but this is something near:
http://www.wyodor.net/Ajax/
Here's another one with drawer in the title:
http://jqueryfordesigners.com/slide-out-and-drawer-effect/
http://jqueryfordesigners.com/demo/plugin-slide-demo.html
Found with : [text drawer|http://www.google.com/search?client=safari&rls=en&q=text+drawer&ie=UTF-8 &oe=UTF-8]

How to make indented text in Muse

How to: make indented text in Muse, like a list with bullits

I read on another post that you can do ALT 0149 (WIN) and it will create a bullet in Muse. I tried ALT+0149 and then ALT then 0149 and neither one created a bullet so I must not be understanding the key shortcuts to create the bullet.
The above video is not captioned (I'm deaf) so I don't understand how he's creating the bullets. Can someone explain what I'm doing wrong?
PS - when videos are made, it would be nice if you brought some kind of graphic on saying (for example) "Press the [whatever] key" so deaf people can see what's happening.

[svn:fx-4.x] 15186: In RichEditableText handlePasteOperation() if there are no constraints (maxChars, restrict or displayAsPassword) and multiline text is allowed we can do an immediate return before the text is extracted from the text flow .

Revision: 15186
Revision: 15186
Author:   [email protected]
Date:     2010-03-31 16:42:19 -0700 (Wed, 31 Mar 2010)
Log Message:
In RichEditableText handlePasteOperation() if there are no constraints (maxChars, restrict or displayAsPassword) and multiline text is allowed we can do an immediate return before the text is extracted from the text flow. This should be the typically case when pasting large amounts of text.
QE notes:
Doc notes: None
Bugs: partial fix for SDK-25793
Reviewed By: Gordon
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25793
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/components/RichEditableText.as

Step by step, how did you arrive at seeing this agreement?

Anyone know how to make vertical text in a table in keynote?

anyone know how to make vertical text in a table in keynote?

Just to add a bit more about this question. I have seen in other related questions that this feature (vertical text) is not available in (apparently) the whole iWork09. someone even said that it should be asked to the developers, so they include this feature in iWork10. I find this issue a bit sad. This feature has been present in msOffice since a while, and at least for me, this is quite important for my work. It is also apparently not possible to have different page orientation in the same document, meaning portrait and landscape, so one can have wide tables in a whole page, for example. If this is true, it is again sad, and I just cannot understand why such a basic feature is not available in an already 09 version. I am using only the trial version of iWork, but already in the first day I have discovered that I actually cannot do what I was used to. Again sadly I (and many others I guess) will have to stick to Office until the mac software is fully developed.

Help:How to make static text in JTextField??

How to make a text to be displayed initially on a JTextField, yet we can not change the text (so the text
is static)?
The other question:
How to make an input mask so that a JTextField
has input pattern of XXX.XXX.XXX.XXX
(which is the mask of IP Address) ??
What I know that limiting input in JTextField can be done
by extending PlainDocument....what about the cases above??
Please reply if you know.
Thanks a lot,
Ted.

For the first question, just call setEditable(false).

How to edit linked text in an Indesign long document without it effecting the whole document

I want to work out how to edit text in indesign without the rest scrolling
I have a large 200 page book. The text was supplied in Word and I have placed the whole document automatically and now I am going through each page doing my magic with pics, stylesheets etc.
When the client comes back with edits, I am concerned that deleted or adding in text will scroll the text to the next chapter, etc etc. This will be a nightmare. Not sure how to unlink say 5 pages or so that are in each chapter so I can edit easily without the whole document being effected.
Apologies I am probably not explaining myself all that well.

lisalip wrote:
john the link is broken
I can see there are scripts but I don't want each page separate rather each chapter (each chapter can go for 2 or 7 pages)
I am only 35 pages or so into the book and if I have to I can re place the text with some work, ie start again with the text pages.
seems sily though that I cannot split the threaded stories a few pages at a time.
The link is now fixed.
You can split the threaded story into separate stories anywhere in the thread. At the chapter breaks seems logical. There are many users who'll assert all sorts of right/wrong at you when it comes to threading text. For my purposes, I set up long documents much the way you propose; threading articles, stories, or chapters discreetly; rarely would I ever thread an entire long document as one. It's a preference, not a rule. Each way has benefits and pitfalls.

How to make a text variable (running header - character) resize a text frame?

I have successfully been able to get a metadata text variable to auto-resize a text frame, but when I change the text variable to a running header-character/paragraph variable, the text frame does not resize - in fact it gets smaller and squashes the text.
Surely if Indesign can handle one kind of variable it should handle another??
Please help!

Thanks all.
Will- I tried adding another character to the text box but this made no difference.
Eugene- I'm trying to avoid the purchase of any 3rd party plugins due to budget constraints.
I realised that all I needed to do was use a wide paragraph rule to emulate a box behind the text, and make the text box long enough to hold all possible variables.
One other issue has now cropped up, the running header (character) only grabs the text up to the first return, but I need it to grab all text formatted with the Character Style (2-3 lines max).
I require a forced line break in the title (where the header is being pulled from) as it has a paragraph rule style attached, requiring a full return for each line of the title.
Any ideas?

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell. Can you tell me how I can rotate the contents with-in a cell?

Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell. Can you tell me how I can rotate the contents with-in a cell?

Numbers does not have rotated text within cells. You can place a text box over the cell that has rotated text but you cannot rotate text within a cell.

How to make a scroll animation constantly fixed after scrolling? I want the animation to Start when I scroll down, but I don't want the animated thing to disappear when I scroll up again.

How to make a scroll animation constantly fixed after scrolling? I want the animation to Start when I scroll down, but I don't want the animated thing to disappear when I scroll up again.
I know how to start the animation by scrolling down, but I simply want it to stay there after it. Could you help me please, guys?

Hi Tom,
There is no native feature in Muse to achieve this.
Regards,
Aish

HT2500 how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise.

how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise. thank you.

Attach it to the message. An attachment is an attachment -- if it is displayed or not by the recipient's e-mail client is not under your control.
You can zip it (compress it) before sending it; if it's text, you should zip it anyway; if it's JPEG, zipping will not reduce the size (in fact, it's even possible it may increase it slightly), but most e-mail clients do not display what's inside a zip archive.

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to make the text flow in a table from on page to the next?

Similar Messages

Maybe you are looking for