How to: make these effects

vimeo.com/3114617
In this video (Link above) there are some sort of color explosion effects done on pedals of a flower which occur from 1:05 to about 2 minutes in the video. I am wondering if this was done with final cut and if not if it is possible to do in final cut. Thanks

qoom wrote:
… sort of color explosion effects done on pedals of a flower … I am wondering if this was done with final cut and if not if it is possible to do in final cut.
just read the description:
… It combines an innovative mix of … and live projection mapping techniques.
as you can see obvously, the explosions are projected onto the flowers - you see, the 'mapping' is 3-dimensional, incl. depth of field ... so, no Motion, no editing - 'simple' mechanically optics, point your old Super8-projector onto a bunch of flowers
(many James Bond title sequences were accomplished with that technique in the 60ies, 70ies .... )

Similar Messages

How to make this effect in Keylight?

Hi, I have question, how to make this effect in Keylight?
I know that this overlay is added here:
http://oi57.tinypic.com/1174fup.jpg
Photos:
http://iv.pl/images/18475588964010299091.jpg

Keylight what? All I see is some effect similar to Leave Color, a.k.a the Pleasantville effect that made the rounds 10 years ago. It may require additional masking and otehr effects, but definitely not something that is specifically related to Keylight...
Mylenium

How to make glitch effects

Hi, i have question. How to make glitch effects? Like in this picture:

Hi,
I appologize to the moderators before hand, but I cannot help myself!:
Bogiesan.....
Pierre

How to make an effect of a glass breaking and fall into pieces?

How to make an effect of a glass breaking and fall into pieces?
I want to make an effect where there's a guy hitting a wall and the wall falls into pieces...Please help!! I can make the guy in green screen but its the effect of the wall breaking that I want to know how to make in motion. Hope anyone can help

Search is your friend:
http://discussions.apple.com/search.jspa?threadID=&q=shattering&objID=f656&dateR ange=all&numResults=30
Patrick

How to make this effect ? ( video )

Hi all
how to make the screen blink dark like in this video http://www.youtube.com/watch?v=TszuTgFx93U
starts at 0.46 end at 0.50
can anyone tell me hows it called ?

If you mean this effect and then changing to a black screen then this is a glow with an add blend mode and a blur followed by a black layer multiplied with opacity keyframes.
I would put the video on the bottom layer, then add an adjustment layer and set the in and out point of the adjustment layer to the length you want to have this effect. It's only a few frames in the sample video. Then I'd go to the middle of the adjustment layer and add Glow to see if you could get close to this effect. Then I'd animate the opacity of the adjustment layer from zero to 100 over a few frames. I'd then set a new black solid above that and set the blend mode to Multiply. Set the in point just past the second keyframe in the adjustment layer and set the opacity to 0. Then move in a few frames and set the opacity of the black solid to 100% and set the out point of the adjustment layer to the same spot. Then move down a frame or two and set another opacity keyframe for the black solid at 100% then move down a few frames and set the opacity to zero and set an out point for the black solid.
Figuring these things out is just a matter of looking at the frames and trying to figure how to stack layers up to achieve the effect. Grab some stills from various parts of an effect you are trying to copy and then try and figure out what you could do to the footage to get the same result. Only a few of the effects you see are just a single plug-in applied to a single layer. This is the best way to learn After Effects.
Here's what a comp would look like using a frame from the sample video. Note that the adjustment layer and the black solid are only a few frames long. I made a quick stab at the color grading of the frame by making some adjustments to the A and B colors of the glow, added some blur, and added a little color correction to the adjustment layer using curves. This should get you started.

How to make this effect? i can't sleep! ...

Hello Guys.
Can you tell me how to make effect from 8 second in movie? I talking about this cicles <blue lights>
http://www.youtube.com/watch?v=U6tS9v3srhk
Please help me...
At 7:11 this is longer than in 8 please help!

Here's a sample that randomly creates and manipulates the dots. Study it, play with it.
http://www.nedwebs.com/Flash/AS3_Highlights.fla

How to make shiny effects on cloth in illustrator?

Hi there,
# The exact version of Illustrator you are running.
Illustrator cs3
# Your Operating System details.
Windows XP
# Amount of installed RAM.
2 GB ram
# Amount of free disk space.
~360 GB
# Make/Model of Video Card.
NVidia Ge Force 7600 GS
I m using photoshop cs 3 and Illustrator cs3.
before i was using the burn & dodge tools to create shiny effects on clothing when used photoshop.
Illustrator seems to have more options to create effects?
Example of what one user using illustrator made (and what do i mean by shiny effects) please take a look at this picture for even a better detail)
http://bp2.blogger.com/_RVqi7Q6ouwA/SAeffNlBurI/AAAAAAAAA1Y/79mLZ2emOCw/s1600/Diana%2BJack et%2BDress%2B%26%2BPants%2BPoster.jpg
Please let me know where i can find such tutorials explaining how to make them. thank you a lot :)

Link no good. Returns message:
>
Forbidden
Your client does not have permission to get URL /s1600 from this server.
But this statement:
>Illustrator seems to have more options to create effects?
Suggest you are unaware of the fundamental difference between Illustrator and Photoshop. Photoshop is an raster image editor. It works by adjusting and moving pixels. Pixels are like tiny Legos that make up an image. Look closely enough and you can see the Legos. Illustrator is a vector graphic editor. It works by manipulating the shapes that an image appears to be made from.
The web page you're looking at is a good example. Each letter is a shape that is scales to size and positioned according to the HTML layout instructions in the page's code. If you were to edit this page as a vector (Illustrator) you could be-size or reposition the frames that determine where text goes. You could edit the text, move letters and words around, change the font or the size of the text, and more.
If you were to edit the page as a raster (Photoshop). You'd be more limited in some ways, since all you'd be working with is the image of the text, not the text itself. You wouldn't necessarily be able to do
less. You'd be using different tools. If what you wanted was to edit the text or reformat it, then Illustrator would have the right tools for that job. If you wanted to blur the text or erase some of it as if wiping an eraser over the page, then Photoshop would have the better tools for that job.
Without seeing the image you tried to post, I'm going to assume it's a realisitic looking illustration, like
this one. That was drawn by a pro with years of experience with Illustrator and years more skill as an artist. If you want to make that image, you're going to have to go to school for a long time.

How to produce these effects?

Hi! Can anyone tell me how to produce the effect in the demo "2D video photo monage" in FCP?
Please click the following link:
http://www.vki-party.com/samplewedding_video1.html
and choose "2D video photo monage"
I want to make the photos animate in a 3-D way like the 2nd and 6th photo in the demo.
thanks.

Those are fairly simple moves that you can do right in FCP, or Motion ... or After Effects. Also, there are MANY programs on the market that will automate the process for you.
-DH
also see: http://www.kenstone.net/cgi/discussions/general.cgi?read=84867#TOP

How to make an effect stop and start again?

How do I make an effect start stop and than start again?
I'm trying to blur faces (I finally figured out how to do that---copy the video to a 2nd layer and use the mosiac and crop effects) but how do I make the effect only appear when the face is in the screen as multiple times throughout the video clip the subjects face goes off camera. In the effect controls window it doesn't give me an option to add a blank keyframe.
Any advice on how to have this effect start/stop multiple times in one clip??
Thanks

If the effect isn't keyable, try keyframing the transparency of the copy with the effects on it.

How to make this effects on AE CS4

First of all, I apologize for my English
Anyway it's amazing video
I'm wondering can AE do this? or need to use some software like cinema 4D ? How to make the light streak around the guys , and some part it look like it's behind on some parts I tried , rotoscoping some part the light streaks will go to behind , but how to go back to front ? and it look smooth and perfect like the preview video? Anyone could tell me the steps for this project?
Anyway , here are my quesions 1. I don't know how to create the own path for the light streak , for example , i want to make it around the guys . 2. When it's a moving objects , how can I make that perfect for the light streaks path ? Thank someone for help

The answers are the same ones you got on Video CoPilot. Yes, rotoscoping and yes, Particular. The rest is just a matter of a few keyframes, some tracking and arranging everything in 3D space plus finding the right masking modes. Just keep trying. Nobody can explain to you how to make art, especially since you are a beginner at both AE and Particular.
Mylenium

How to make this effect

hello everybody!
How do i make those little scan line (or whatever they are called)
like on this image. Effect is on the banner/scroll and shield.
thank you
http://img504.imageshack.us/img504/3552/createimageao9.jpg

I would say -and this is how I would do it too- pen tool. Just good
old-fashioned technical ability.
a plug-in for this sort of effect would have to be very complicated to
give you the exact thing you were looking for.
sam

Complete Novice-Need to know how to replicate these effects

Hey,
I am currently making some instructional videos for work where we help disabled students with computer software. I write all the scripts, get the audio done and create the videos but used to get another guy to produce them and add the finishing touches. He no longer works for us and I desperatly need to get more done but can't figure out how.
It is the transitions and effects on the video etc. that I can't figure out. I have attached a sample of what I am talking about. It is the transition from the logo to the video that I need to know as well as how to get the logo in the bottom of the screen and the title of the video coming up then fading out. More than happy to pay for this knowledge as I have loads of these to do.
Please have a look at the sample and let me know if you can help me. Much appreciated.

It looks like a 'zoom blur' transition,
but from the looks of it, my guess is that it was done inside a motion graphics program... probably After Effects.
There is no default transition like this premier pro but there are 3rd party plugins that may offer this transition (as well as many others...)
http://www.adobe.com/products/premiere/extend.displayTab4.html#ABSoft
The last transition listed on FxFactory Pro is a 'Zoom dissolve' which looks exactly what your after ...but unfortunately they are only compatible with after effects at the moment
http://www.noiseindustries.com/fxfactorypro/plugins/#transitions

How to make this effect precisely

Hey,
some ideas have been to use Halftone Pattern effect but this produce a somehow different look.
thanks!

Illustrator's Halftone effect is limited to dots. Try with Photoshop; make the basic image in Illustrator (using black as the base color), open in Photoshop, convert first to grayscale and then to Bitmap. In the Bitmap dialog, you can select "Halftone" and specify it should be lines.
That said, it won't be exactly the same. Perhaps this was a manual job.

How to make this effect: text or image on water surface in Psunami plugin ?( AE) + video

Look at the video. Its made in Psunami plugin for After effects. But how???? Any idea, who knows all the steps?
https://m.youtube.com/watch?v=q_O_BeJWg6g

It's just an image map. Play with the settings. Here's a shape layer making a hole in the water and adding a bit of color.

How to make mouseover effect text show image in popup window or tooltip?

I am trying to display a popup image in a new window when the mouse moves over some text. Or perhaps, the image could display in a tooltip when the mouse moves over some text.
However, I have achieved the functionality of an image appearing above the text when the mouse moves over some text. This is how I did this:
I put this code into the Page HTML Header:
<script type="text/javascript">

</script>
I created a region and put this in the Region's Title field:
{div onmouseover="setFirstChildImgDisplay(this,'inline')" onmouseout="setFirstChildImgDisplay(this,'none')">Check out Page 1 here <img src="#WORKSPACE_IMAGES#DGNR Preview Page 1.bmp" alt="Page 1 Preview" style="display:none;">{/div}
I am thinking that I should not have all of this code in the Region's Title field. But, I don't know where else to put it in APEX.
So my questions are:
1. how to get an image to display in a popup window or as a tooltip when the mouse is moved over some text?
2. where should the {div} content be placed in APEX, if not in the Title field?
Please note that I used '{' & '}' instead of '<' & '>' just so the div would display in this post.
Also, I would like to give credit to this website because this is where I found out how to do what I have provided above.
http://forums.devshed.com/web-design-help-2/mouseover-effect-text-shows-image-321876.html
Thank you in advance,
Maggie

It's just an image map. Play with the settings. Here's a shape layer making a hole in the water and adding a bit of color.

How to: make these effects

Similar Messages

Maybe you are looking for