How to make those shadowed borders left and right of your page?

Hi, Can someone tell me if I am on the right track? Here's what I've done so far. I've specified the background colour in the properties section. I've set up a 3 column table (fixed size) that has small columns left and right and a big one in the middle. For those small columns I've pickwhipped to 2 small gifs with the shadow. Previewed in Safari and everything looks ok.
My question: is this the best way to do this? Or does it need a CSS approach? And if so, how?
Now I want to give the bottom a shadow as well. Do I proceed in the same way? So make a left corner, right corner and a bottom? I'm working with GL CS2.

The best way to slice things up depends on how the page is layed out. If the content area has a fixed width that centers (or doesn't), then might make more sense to have 3 vertically stacked divs with the background and drop shadows, then nest another div in the middle with margins for the actual content. Or, if the content size is completely fluid, the same structure could still work with floating divs (or absolutely positioned relative to a single container?) holding the corner images. Or there's always the old-school tables way of slicing things up (though I'd avoid that).
There's more than one way to do it, and I don't know that any single option is necessarily the "right" way to go... as long as it works and validates?

Similar Messages

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz

CM2320 unwanted black fading borders left and right

Hello,
I have a CM2320. When printing I get about 2-3cm wide of unwanted toner at the left and right edges.
At the edges it is pretty black and it is fading to the center of the page.
I ran the cleaning routine. The reference page printed after this is perfectly fine. Then when I print another page from software the problem is back.
Can anybody tell me what is likely causing this problem?
I was thinking about replacing the toners, but as these are rather costly it would be really nice to know in advance if this will have any effect, and if this problem can be solved at all.
Thanks in advance for any help.
Ronald

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to create buttons that control left and right scroll?

I would like to know if there is a way to create two buttons, each on the left and right hand sides of the screen, that would control the horizontal (x-axis) scroll of my website. I've built two image buttons that link to anchors located on the left and righthand edges of the page, but this does not achieve the funtionality I'm looking for. I would like each button to scroll incrementally every time it is pressed.
Is this possible in Muse?

There are no facing pages in Pages 5.
Peter

How to split audio tracks into left and right channels as we do in FCP or Avid needed for dubbing?

We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Pl help. Since we need to maintian the split track to dubb into other languages.

You need to do this before adding the footage to the sequence:
Select the clip (or multiple clips) in the bin
Menu > Clip > Modify > Audio Channels (Shift G)
Change 'Number of Audio Tracks' to 2
Change 'Channel Format' to Mono
Dismiss the info message.
When you place the clip in a sequence it will now drop L and R into separate tracks (assuming your sequence allows that audio model).

Left and Right Side buttons

I just got a replacement 8330 because I dropped my previous one in a muddy puddle. I cannot remember how I originally re-programmed the left and right side buttons to run different applications than the default (camera, and voice dial). Can someone help me out?
Solved!
Go to Solution.

Options > Screen/Keyboard > Left and Right Convenience keys.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How do you make a "div" tag stretch to the top, left and right?

Hi, i'm making a professional website on dreamweaver with both codes and WYSIWYG data however i've noticed top, left and right in the CSS script for my div tags. do you know how i can "stretch" the left, right and top to make it look like one of the top div tags on one of these sites:
http://www.neopets.com/ products div tag above the site that mentions other nick products

Go into http://images.neopets.com/css/default.css?v=3
And change the width of the header from 996px to 100%.
Gary

How to make track work in both left and right speaker?

i have an audio track with 2 speakers that each had a lav mic on them. one was recorded into left channel and the other the right channel. so of course when i play back each of their voices only come out of one speaker. pretty new to audition so how do i fix the track so that they each come out of both speakers? TIA

I have to say that, although not uncommon, for TV it depends quite a lot on how things are shot. In a standard interview situation where you might have a 2-shot to establish (with a definite left and right position) then a close up of the interviewee then a cutaway of the reporter and so on, panning can become very confusing and it tends to be better to just put everything in the centre.
Radio is easier because you don't have to be aware of what pictures are showing--but, even there care needs to be taken especially since, as Steve says, a lot of listening is on ear buds or headphones which accentuate any panning. Even in radio, though, choices have to be careful...for example, let's say the host starts with an interview where he's panned slightly right and the guest slightly left. So far, so good. However, then the next two stories are just studio reads...does the host stay panned slightly right for consistency or does he move to the centre possibly causing confusion?
I'm not saying never give positioning clues in a radio or TV mix, just that you always have to be aware of the bigger picture.

If I have audio coming from left channel. How do I make same audio Left and Right?

Hi there,
I've recorded some footage with a mono mic and it recorded the audio on the left channel of the audio. In FCP. I placed this audio clip as a part of a multi-cam clip but the sound is only coming out the left. Is there a way to set this audio to mono or to make them play the same levels through the left and right channels?
Thanks,
Caleb

Wow! 30 Seconds later, I figured it out. LOL
Under Inspector for audio, you just click on channel configuration, click on channel and use "Dual Mono" mode. Thanks Caleb!

White Borders Around the Left and Right Edge of a Published Movie

Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
Any help would be appreciated.

You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
<style>{margin:0px;}</style>

How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to set audio instruments to record in left and right channels

I am a new Logic express user. I am using a PreSonus FireWire to in put guitars and mic's. If I use Logic Express to record my guitars from input 1 I only get sound out of the right channel. If I use input 2 I only get sound out of the left channel. If I use the Garage Band tab to input the same instruments plugged into either channels 1 or 2 on my PreSonus I get sound from both the left and right channels together. There must be a simple fix I am missing in Logic. If anyone can help me I would I would appreciate it.

Hi t,
welcome to the forum!
There's nothing wrong with your set-up!
MONO inputs to mono tracks,
from the mono track you can add mono to stereo plug-ins and benefit from that.
In garage band you have a mono input that showing a stereo channel, that's what what I have explain above. In Logic it's a blody waste of HD space (not to say wrong) as you recording a mono file to stereo.
Think bigger and pratical now T, those things make all the sence,
GB is so easy that can confuse us about the real thing because it's hidden from your eyes.
Kindly regards,
Jorge

How to make those shadowed borders left and right of your page?

Similar Messages

Maybe you are looking for