How to make two clips trade spaces?

Suppose I have ten clips in a row and I want to put clip 3 into spot 10 and put clip 10 into spot 3 (basically just trade places with two clips). There must be a function to do this - any idea would be much appreciated!

There must be a function to do this...
There isn't. You have to do it manually.
Press tttt (t four times) to get the Forward Select All mode.
Click the pointer on clip three, it and everything further up will be selected. Drag all those clips far enough up the Timeline to leave a gap big enough for for clip ten.
Grab clip three and move it loosely to the very end.
Grab clip ten and drag it back to butt up with the end of clip two.
If Snapping is on it will jump into position when you get close.
Right click in the excess space after the repositioned clip and choose "Close Gap".
Do the same for the newly positioned clip three.

Similar Messages

  • How to make a clipping mask in this particular case?

    Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner.
    http://vector.tutsplus.com/tutorials/illustration/how-to-create-a-medieval-paper-scroll/
    In the link to above tutorial on how to make a medieval scrol I'm stuck at step 25 and would be glad to anyone who helped.
    As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
    Now as you can see in the image below I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
    One more thing, I have clipped masks before too in the same tutorial given above but I don't know what has gone wrong for me in this step.
    Please help.
    Signed,
    Awais Rauf

    Why would you want a clipping mask? I don’t see a reason for it.
    However, for what you want I would use the Pathfinder panel to combine all the paths into one shape. First use the ungroup and release compound commands a few times each, to make sure you have nothing grouped. Then press the top left button in the Pathfinder p[panel. This should produce one closed path that just surrounds the scroll.

  • How to make two portals share the same UME?

    Hi all,
    Can anybody share some information about how to make two portals share same UME? Is it possible? Thanks.
    B.R.

    Hi Lee,
    Its very much possible for 2 portals to make use of one datasource for UME.
    Lets assume for a scenario sake we are using an LDAP server as the UME for portals environment...so you would simple need to point for the UME's to the LDAP datasource.
    If you have something in particular do post back
    Thanks,
    GLM

  • How to view two clips with 50 % transparency each at the same time?

    How to view two clips at the same time with 50 % transparent each (end of one clip and the starting of the next clip in time line) so that  one overlapping the other, both can be seen.  This is to merge two clips, so that I can stop at the correct frame of the first clip and start at the appropriate frame of the next clip.

    You're familiar with the TRIM-tool?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

  • How to make a clipping of an email address

    Hello...
    My situation is that I'm in the middle of a job search, and I'm registering all over the place, and everyone wants my email address -- in fact some use it for my "user name" -- and so (for security etc.) I set up a couple of new mailboxes (which I can then simply dump once I land a gig). And I'm getting tired of typing in the whole address all the time, so I thought I'd make a couple of text clippings of my addresses and just drag the appropriate one into the "user name" box as needed. (Yes, I know I can do this in Text Substitution sysprefs, but I'm a mouse-oriented kind of guy, I use key commands relatively rarely; think of this question as an academic exercise.)
    The first thing I tried was what I do whenever I want to make a clipping: I highlighted my address in a document and dragged it to my desktop. When I try that, however, instead of a clipping, I get a .mailtoloc document. If I then change the extension to .textclipping, I get an useable clip, but the contents of the clip include "mailto:" appended to my address ( e+.+g., "mailto:[email protected]"). And that's where I'm stuck. I can't find how to edit out the "mailto:" yet keep it a clip. If I open it with TextEdit I see a bunch of html code; if I edit that down, and save it as a .textclipping, the resulting clip itself is empty ("Clipping contents: unknown"); if I open it with TextWrangler it opens a Mail message (which is annoying).
    So that's what I want to do, I want to make a standard text clipping, the contents of which are a standard email address -- without "mailto:". It would seem the simplest way would be to edit that string, if I could find it. I am competent and confident using Terminal and other system-level tools, and have Developer Tools installed. (If this were still pre-X, at this point I'd whip out my copy of ResEdit and start looking for a 'STR ' resource. Alas, I did not keep up.)
    TIA,
    Jeff

    Good suggestion. It gets rid of the "mailto:", but I have to remove the space after dragging the clip into the user name box. Interestingly, I can open the clip with TextWrangler, remove the space, and save it as a clip. However, the clip, as a clip, still has the space! When I open it again in TextWrangler, the space is gone, but still appears when I drag the clip or open it in the Finder. So not quite a cigar. But definitely useful.
    So the question remains, where is a clip's data stored? Is it editable? If so, how? If not, why not?

  • How to make two mono audio tracks into a stereo pair?

    My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
    In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair.  I can't figure out how to do this in Premiere.
    When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
    So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
    Tom

    Hi Tom,
    Tom77 wrote:
    I need to do in my videos that I either can't do in Premiere or that require involved workarounds like this, things that I can do instantly
    I used to think like you do. These aren't workarounds, per se. The issue is that Premiere Pro is a different program, so you have to approach some things slightly differently.
    Actually, Premiere Pro's audio capability is more like a DAW than Final Cut was, and more powerful too, so if you know that workflow it makes more sense. A lot of FCP people don't have training in programs like ProTools or Audition, so it's more difficult for folks like yourself (and me, too) to catch on. Once you learn it, though, you begin to see its power.
    Tom77 wrote:
    things that I can do instantly with the flick of a keyboard command in Final Cut, such as link and unlink audio tracks.
    In Premiere Pro CC, you can link and unlink audio and video tracks with a keyboard shortcut for "Linked Selection." You have to create it in your Keyboard Shortcuts dialog box, but it works just like the one in FCP. Make it Shift + L if you like.
    Tom77 wrote:
    Not to mention the fact that I can have as many projects open in Final Cut as I want, and copy and paste between them. Each open project becomes a tab on the timeline, and I can jump beween projects by just clicking on their tabs. I was shocked when I tried to open two projects in Premiere to find that it only allows one at a time to be open. That seems really primitive--
    Again, you can achieve what you want (copying and using items from other projects), you just have to go about it differently. All you do is navigate to the other project files in the Media Browser and import items that you need in this fashion. So, no, you don't have more than one project open at a time, but you got what you wanted, stuff from another projects in your current project. That works for me, anyway.
    Again, Premiere Pro is a different program. You can achieve the same goals, but sometimes have to go about it differently. Some things are faster, some slower. Some are easier to learn, some harder. Hopefully, you see my point.
    I need video generators to make arrows, circles, squares, etc. and transitions such as edge wipes and clock wipes to animate them, all to point out and emphasize things that I'm demonstrating and explaining in my videos. Premiere has no such generators, nor are there any third-party plug-ins available to add them, that I've been able to find.
    Do you know about the Titler? It has a lot of useful shapes. You can also create shapes in After Effects and Photoshop and import them. The shapes you make in those programs can look a lot better than the stock FCP effects.
    There are lots of third party effects, some that have generators. Check out Boris Continuum, FX Factory, CoreMelt, Film Impact, and more.
    There are pitifully few transitions in Premiere at all (the Mac version) compared to Final Cut.
    I'm really not a transitions person, and I find the FCP transitions looking tired anyway. The only one I really need is a white flash and I can either create it, or use a third party flash effect. If you need cool, modern transitions, check out Film Impact or the other third party plug in foundries I mentioned. There is an Edge Wipe transition, called "Wipe." If you need feathering, check out the Wipe Effect, which you can keyframe to look like a transition.
    More and more I would like to be moving completely into Premiere, but I keep running into these inadequacies in the program, these roadblocks, for my purposes at least.
    The more you work with it, the less you'll be working with FCP. That's what most people are saying anyway. Sure, there are minor annoyances associated with learning a new app, but you also take the good along with it. I suggest you just dive right in. It may take longer at first, but you can get your speed up in time.
    I have no doubt that sometime in the future Premiere will become everything that I want it to be, and at that time I can finally abandon Final Cut for good, as I wish I could do right now.
    I also came from FCP, taught FCP for nearly a decade, wrote a book about FCP, help start the first FCPUG, worked at Apple on two versions of FC Studio, so I do know what you are going through. Just keep at it and keep posting here. I'll be glad to help you with any workarounds or confusion related to moving over from FCP.
    Thanks,
    Kevin

  • How to superimpose two clips in multi cam?

    I have set up a two camera multicam clip in FCPX 10.1
    Working fine.  Love it.
    But, I want to superimpose my B roll with the primary in some spots.  Cant figure out how to do that.
    Any ideas.
    Thanks
    Jac

    You could make two copies of the multicam clips, and connect one on top of the other, to maintain synchronization. Then use the blade tool, remove any parts where you don't want to superimpose, and resize and move the top one as needed.
    Caution: multicam clips refer to a parent clip in the event (like compound clips do), but unlike compound clips there is no command like "Reference new parent clip".
    So the safest way to do it is to create two identical multicam clips from the start - say Multi1, Multi2 - and put one on the primary and the other as a connected clip.
    Also, if you plan to use many such B-roll inserts, it may be neater to make the connected clip into a secondary storyline, call it 'B-roll', say; but then, of course, you should not delete any intermediate parts; use "replace with gap" instead, to maintain sync).
    I forgot to add that:
    1) with this method you can start by resizing the top clip appropriately before making any cuts, so you don't have to do it for each insert
    2) of course, in the connected clip, you'd start by selecting  the angle containing the B-roll and probably wouldn't change anything
    3) you may want to turn off audio on the connected clip
    Message was edited by: Luis Sequeira1

  • How to make a clip art (diagram )interactive report?

    Hello ABAPers,
                           I want help from you. I have a requirement like ..when i am excuteing a report i should get a clip art and the clipart which i got i have to double click on it there by i should get the details of that clip art. I have succeed till getting the clip art and from here i am not getting the idea how to make the clipart(diagram) active so tht when i am doubleing it i should get the details.
    The code that i am using to get the clip art just copy and execute you will get the output till clipart.
    *& Report  ZCLIPART_IR                                                 *
    REPORT  ZCLIPART_IR.
    START OF DO NOT CHANGE***********************************
    DATA: docking TYPE REF TO cl_gui_docking_container,
          picture_control_1 TYPE REF TO cl_gui_picture,
          url(256) TYPE c .
    DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
          html_table LIKE w3html OCCURS 1,
          return_code LIKE  w3param-ret_code,
          content_type LIKE  w3param-cont_type,
          content_length LIKE  w3param-cont_len,
          pic_data LIKE w3mime OCCURS 0,
          pic_size TYPE i.
    END OF DO NOT CHANGE***********************
    DATA : sum(4) , num1(4) , num2(4).
    PARAMETERS: p_dummy(4) DEFAULT '4' .
    PARAMETERS: p_dummy1(4) DEFAULT '5' .
    AT SELECTION-SCREEN OUTPUT.
      PERFORM show_pic.
      START-OF-SELECTION.
    *& Form show_pic
    FORM show_pic.
       DATA: repid LIKE sy-repid.
             repid = sy-repid.
      CREATE OBJECT picture_control_1 EXPORTING parent = docking.
      CHECK sy-subrc = 0.
      CALL METHOD picture_control_1->set_3d_border
        EXPORTING
          border = 5.
      CALL METHOD picture_control_1->set_display_mode
        EXPORTING
          display_mode = cl_gui_picture=>display_mode_stretch.
      CALL METHOD picture_control_1->set_position
        EXPORTING
          height = 50
          left   = 40
          top    = 30
          width  = 190.
    CHANGE POSITION AND SIZE ABOVE****************
    IF url IS INITIAL.
    REFRESH query_table.
        query_table-name  = '_OBJECT_ID'.
    CHANGE IMAGE NAME BELOW UPLOADED IN SWO0*****************
        query_table-value = 'ENJOYSAP_LOGO'.
        APPEND query_table.
        CALL FUNCTION 'WWW_GET_MIME_OBJECT'
          TABLES
            query_string        = query_table
            html                = html_table
            mime                = pic_data
          CHANGING
            return_code         = return_code
            content_type        = content_type
            content_length      = content_length
          EXCEPTIONS
            object_not_found    = 1
            parameter_not_found = 2
            OTHERS              = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION 'DP_CREATE_URL'
          EXPORTING
            type     = 'image'
            subtype  = cndp_sap_tab_unknown
            size     = pic_size
            lifetime = cndp_lifetime_transaction
          TABLES
            data     = pic_data
          CHANGING
            url      = url
          EXCEPTIONS
            OTHERS   = 1.
            ENDIF.
            CALL METHOD picture_control_1->load_picture_from_url
        EXPORTING
          url = url.
    ENDFORM.
    Thks and waiting for your replies.

    Hi ataran,
    in case, your version of iMovie is able to import the footage, have a read here:
    http://www.apple.com/ilife/tutorials/imovie/

  • How to make two Application Modules share the same entity cache?

    Hello everyone, I am using JDeveloper 11.1.2.3.0
    I have a little problem in my application through using two AppModules that contain also same ViewObjects. So to be clear one VO is declared in two AppModules. When I commit the view by using AppModule1 and then go to another page that uses the same VO but from AppModule2, I have to commit again, even through the row is previously stored in the database.
    I understood that this came because different AppModules use different entityCache for database communications.
    I am asking if anyone knows any option on how to sync the entity caches from the two appmodules, or how to make them use the same entity cache.
    Thank you

    You can make a copy of the app and give it another name, but it will use the same settings files no matter which you open. Settings aren't stored in the app, but in your Preferences.
    Firefox, being a Windows derivative, might have the capability to use "Profiles" where you'd set it up different for each profile. I don't use Firefox, so I don't know if that option exists.

  • How to make two matrix and table into same group in SSRS

    Hi
    i need to dispaly to dispaly data  matrix and table .  but matrix data on first page and table data on second page.
    how to achive this . if i give pagebreak for every new instance for matrix, only matrix data is getting dispalyed in one page and on the second page seocond record date is getting displayed. after all matrix data is displayed ( in separate pages) , table
     data is being dispalyed.
    but i want to display matrix data on first page and table data on the second page for the first record. for second record  also it should display matrix data on 3rd page and table data on 4th page etc..
    i mean how to make matrix and table data as same group. so that i can set "page break for new instamce" etc..
    how to achive this in SSRS2008

    Hi Ramkanuganti,
    From your description, you want to group both the matrix and table on the same field and add a page break between the two controls for each instance at run time.
    To achieve your goal, we can display the matrix in a list and display the table in a nesting list. Please refer to the steps below:
    Drag a “List” to the design surface. Drag the matrix into the top of the list (list1).
    Drag a “”List” to the list1, under the matrix. Drag the table into the nesting list (list2).
    Select “list1” and open the “Group Properties” from the “Row Groups” pane. Add the field on which you want to group the data. In the “Page Breaks” tab, select the “Between each instance of a group”.
    Repeat step 3 to configure the “list2” using the same field. Additionally, please also select the “Also at the start of a group” option.
    For more information about how to work with list, please refer to:
    Adding a List
    If you have any further questions, please feel free to ask.
    Regards,
    Mike Yin

  • How to attach two clips together?

    I want to two clips to be attached and be shown at the same time. How do I do this? Please help. I have iMovie 10.0.2
    Thanks

    How exactly do you want to show them - side by side?  picture in picture?
    read all about the possibilities at:  http://help.apple.com/imovie/mac/10.0/#mov159eff157
    Geoff.

  • How to combine two clips

    can anyone explain how to do this in after effects (if it is even possible). These are two seperate clips combined into one.
    Here is explanation what I mean:
    http://www.youtube.com/watch?v=sF3rnTFATxA

    Well... there are obviously two clips, because there is just one dog running at a time. I guess that obsticles are somehow traced and combined, so they are at the same place in "merged" video.
    0:22 on that youtube clip, you can see (watch referee and that obsticle) that there are 2 clips in one.

  • How to make a clip play backwards in timeline and how to reverse a clip from left to right?

    I would love to know if it is possible to:
    1. make a clip play backwards in the timeline
    2. reverse the orientation of a clip from left to right
    Thanks in advance.

    Yes to both.  The specific method may vary from one version to another.
    1. make a clip play backwards in the timeline
    Right click > Speed/ Duration > Reverse Speed
    2. reverse the orientation of a clip from left to right
    Apply the Basic 3D video effect.  Adjust the Swivel to 180 degrees.
    What version are you using?

  • How to make two standalone oracle databases into master/slave relationship

    i'm not talking about RAC...
    is there any way to make two oracle databases into master/slave relationship? one is hot one is cold, when the hot one is down, the cold one automatically picks up? and of course two databases are in sync all the time.
    any experience?

    DataGuard is an enterprise edition feature.
    You could roll your own standby database by cloning the production system to a backup server and writing scripts that copy the archived log files from the primary to the standby and that apply the archived logs on the standby. Of course, the transactions that had been applied to the primary that were still in the primary's redo logs would be lost if the primary were to fail. DataGuard provides options to keep the standby more closely in sync with the standby to reduce or eliminate that risk, which is one of the reasons that it's an enterprise edition feature.
    If you're on Windows, Oracle FailSafe may also be something to look at.
    Justin

  • How to merge two seperate free space into single partition/volume???

    Hey guys :)
    Please help me on merging two unallocated free spaces in my internal harddisk. I already tried searching for options in diskmanagement but nothing found to do that. The harddisk has two free spaces(1gb and 50.78gb) now, I want to merge them into single one
    and finally as a single parition/volume. Is there any other method or should use any other third party tool?
    I really wanted to attach a screenshot but sadly microsoft couldn't allow me.

    JAJ
    You need a third party tool like Easeus Partition Manager
    Wanikiya and Dyami--Team Zigzag
    Sure I'll try that. Thank you very much :)
    But it is really sad to say that it is real drawback of windows as it doesn't have its own choice in diskmanagement utility.

Maybe you are looking for