How to make "two column & one column" mixed layout?

When writing a review, I want the main article part to be "two column layout" while the topic and abstract to be "one column layout". How could I do that?
THX

Another possible, less elegant solution working in a Word Processing (text based) template, rather than a Page Layout template, is to insert the "Layout Break" function, which drops down from insert. That allows a new "section" to be set up. Each section can be formated for the number of columns you choose. This allows you to switch back and forth without going to a new page.
If you are familiar with MS Word, this function is similar to the "section break" command in Word.

Similar Messages

How to make two PCs (one local, one remote) control the same running vi at the same time?

Hi Labviewers,
I have a vi running, and two PCs are monitoring it, one is local and another one is remote.
I can see the remote front panel at the remote machine by using application property node, but it seems only one of the two PCs has the control of the running VI at the same time.
Is there any way to make the two PCs both have the control of the same vi at the same time? Switching back and forth the control between two PCs is really annoying.
Thanks a lot for any help.
Anne

What exactly are you trying to control?
Perhaps another approach? You could use "Shared Variables" from LV 8.0 and have a copy of the writer VI on each of the control PCs edit the value on the host PC. But as soon as I post, someone is going to talk about multiple writers to shared resources being a bad idea.... so just be careful or you may try to edit a value that has already been changed.
Matt Holt
Certified LabVIEW Architect

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

How to copy data from one column to other column

hi,
can any one tell me how to copy data of one column to other column for some specific data
example
productno ocalyear        actualsales prevplansales   currentplansales
p001       2007                  100              120
p002       2007                   90               100
p003       2007                  120              130
p004       2007                  140              120
p005       2007                  150              150
i want to copy data of p001 and p002 from prevplansales to current plansales
productno ocalyear        actualsales prevplansales   currentplansales
p001       2007                  100              120              120
p002       2007                   90               100              100
p003       2007                  120              130
p004       2007                  140              120
p005       2007                  150              150
is it possible to do?
please suggest me.
i will assign points

Hi,
I think the needed techniques are already described in the documentation, e.g. in
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
or
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
The main techiques used in the above example to bind the filter of the planning function to selected (marked) objects in the analysis item or to drop down boxes (or both). These techniques are used in the above examples.
Regards,
Gregor

How do I switch from one column to another in a simple 3-column document? Seems lame, but I can't find the answer in "help"...

How do I switch from one column to the next, skip around? Tab key doesn't seem to do itl. I can't find any "help" in "help". Help. Please. Thank you.

Hi Karen,
It is simple.
Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
As more text is added, it eventually fills column 2 and flows into column 3:
You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
Regards,
Barry

How to make two portals share the same UME?

Hi all,
Can anybody share some information about how to make two portals share same UME? Is it possible? Thanks.
B.R.

Hi Lee,
Its very much possible for 2 portals to make use of one datasource for UME.
Lets assume for a scenario sake we are using an LDAP server as the UME for portals environment...so you would simple need to point for the UME's to the LDAP datasource.
If you have something in particular do post back
Thanks,
GLM

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

How to retrieve value of one column to other in Apex using Javascript

Hi all,
Can any one help me in solving this problem.
How to send a value from one column to another column using javascript in Apex. I heard that we can use onChange().
My requirement is,
I have a column(Varchar2) in form where i need to enter a value and the data need to be sent to another column(Number) when i press apply changes.
ex: if i enter a value say 1/3 or 1/4 or 1/3*1/6
the result should be entered in the other column.
Message was edited by:
Raman

Try something like
html_GetElement('P1_ITEM2').value = eval(html_GetElement('P1_ITEM1').value);

How to suppress row when one column has zero using condition

Hi Experts,
How do I suppress row when one column has zero.
I read it is possible using conditions.
How ?
Thankyou.

Check this
1. for Query Properties, go to the Display tab and Supress Zeros is "Active"
2. select the Structure, right-click, select Properties, then click "on" Also Use Zero Suppression for Structure Elements
http://help.sap.com/saphelp_nw04/helpdata/en/a4/dd3841d132d92be10000000a1550b0/frameset.htm
Hope it Helps
Chetan
@CP..

How to make changes in deduction column in IT 2006

Hi All,
Scenario: Employee had a sick leave & casual leave quota 6 days in a financial year.
Now the employee had used all his sick leaves and casual leaves and the leaves got exhausted pertaining to this quota.
These days are reflecting in 2001 IT as leaves taken but the deduction did'nt happen in IT 2006
Can anyone tell how to make changes in the deduction column for specific employee code's
Regards,
Srikanth

Hi Megha,
The assignment is properly mapped to counting rule.. Issue is with the validity intervals. SInce the employee already availed the leaves the quotas cannot be deleted in the IT 2006. Issue resolved by making some changes in the deduction column through SQL table entry..
Really appreciate your response..
Regards,
Srikanth

How To Insert Cells Into One Column Only

Can anyone advise me, how to insert a cell (or multiple cells) into +just one column+ whilst leaving everything else on the sheet exactly as it is?
I'm migrating from Excel and can't find this functionality in Numbers
Thanks in advance for any help

Thank you for taking the time to reply, thereby removing the misery of me continuing to search for this absent function!
I really wanted to like the iWork apps! I recently rebuilt one of my rigs and had the intention of making it a Microsoft-free computer - hence the purchase of iWork.
However, the last few days of 'learning curve' I have stumbled upon an increasing number of incompatibilities and limitations when compared to Excel, and the lack of the function to insert a single cell into a sheet is the final deal-breaker for me, sadly.
So, reluctantly, I am going to install my Microsoft Office 2008 suite and get back to where I was before. I will continue to look at the iWork apps but I suspect they'll fall to the wayside.
Once again, many thanks for confirming what I was reluctantly concluding.

Sap.m.Table: How to disable includeItemInSelection for one column?

Dear UI5 Experts,
I have used includeItemInSelection method for whole table as it is required for me on selectionChange event in sap.m.Table control.
Now, I have a requirement where I need to disable that method for one column. Is there a way to disable includeItemInSelection method for only one column in sap.m.Table control. Please Advice.
Thank you!
Regards,
Sai Vellanki

Hi,
you can use method oTable.bindAggregation
Refer example sap.m.Table and see the source code.
Regards,
Chandra

How to make two Application Modules share the same entity cache?

Hello everyone, I am using JDeveloper 11.1.2.3.0
I have a little problem in my application through using two AppModules that contain also same ViewObjects. So to be clear one VO is declared in two AppModules. When I commit the view by using AppModule1 and then go to another page that uses the same VO but from AppModule2, I have to commit again, even through the row is previously stored in the database.
I understood that this came because different AppModules use different entityCache for database communications.
I am asking if anyone knows any option on how to sync the entity caches from the two appmodules, or how to make them use the same entity cache.
Thank you

You can make a copy of the app and give it another name, but it will use the same settings files no matter which you open. Settings aren't stored in the app, but in your Preferences.
Firefox, being a Windows derivative, might have the capability to use "Profiles" where you'd set it up different for each profile. I don't use Firefox, so I don't know if that option exists.

How to make two mono audio tracks into a stereo pair?

My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
Tom

Hi Tom,
Tom77 wrote:
I need to do in my videos that I either can't do in Premiere or that require involved workarounds like this, things that I can do instantly
I used to think like you do. These aren't workarounds, per se. The issue is that Premiere Pro is a different program, so you have to approach some things slightly differently.
Actually, Premiere Pro's audio capability is more like a DAW than Final Cut was, and more powerful too, so if you know that workflow it makes more sense. A lot of FCP people don't have training in programs like ProTools or Audition, so it's more difficult for folks like yourself (and me, too) to catch on. Once you learn it, though, you begin to see its power.
Tom77 wrote:
things that I can do instantly with the flick of a keyboard command in Final Cut, such as link and unlink audio tracks.
In Premiere Pro CC, you can link and unlink audio and video tracks with a keyboard shortcut for "Linked Selection." You have to create it in your Keyboard Shortcuts dialog box, but it works just like the one in FCP. Make it Shift + L if you like.
Tom77 wrote:
Not to mention the fact that I can have as many projects open in Final Cut as I want, and copy and paste between them. Each open project becomes a tab on the timeline, and I can jump beween projects by just clicking on their tabs. I was shocked when I tried to open two projects in Premiere to find that it only allows one at a time to be open. That seems really primitive--
Again, you can achieve what you want (copying and using items from other projects), you just have to go about it differently. All you do is navigate to the other project files in the Media Browser and import items that you need in this fashion. So, no, you don't have more than one project open at a time, but you got what you wanted, stuff from another projects in your current project. That works for me, anyway.
Again, Premiere Pro is a different program. You can achieve the same goals, but sometimes have to go about it differently. Some things are faster, some slower. Some are easier to learn, some harder. Hopefully, you see my point.
I need video generators to make arrows, circles, squares, etc. and transitions such as edge wipes and clock wipes to animate them, all to point out and emphasize things that I'm demonstrating and explaining in my videos. Premiere has no such generators, nor are there any third-party plug-ins available to add them, that I've been able to find.
Do you know about the Titler? It has a lot of useful shapes. You can also create shapes in After Effects and Photoshop and import them. The shapes you make in those programs can look a lot better than the stock FCP effects.
There are lots of third party effects, some that have generators. Check out Boris Continuum, FX Factory, CoreMelt, Film Impact, and more.
There are pitifully few transitions in Premiere at all (the Mac version) compared to Final Cut.
I'm really not a transitions person, and I find the FCP transitions looking tired anyway. The only one I really need is a white flash and I can either create it, or use a third party flash effect. If you need cool, modern transitions, check out Film Impact or the other third party plug in foundries I mentioned. There is an Edge Wipe transition, called "Wipe." If you need feathering, check out the Wipe Effect, which you can keyframe to look like a transition.
More and more I would like to be moving completely into Premiere, but I keep running into these inadequacies in the program, these roadblocks, for my purposes at least.
The more you work with it, the less you'll be working with FCP. That's what most people are saying anyway. Sure, there are minor annoyances associated with learning a new app, but you also take the good along with it. I suggest you just dive right in. It may take longer at first, but you can get your speed up in time.
I have no doubt that sometime in the future Premiere will become everything that I want it to be, and at that time I can finally abandon Final Cut for good, as I wish I could do right now.
I also came from FCP, taught FCP for nearly a decade, wrote a book about FCP, help start the first FCPUG, worked at Apple on two versions of FC Studio, so I do know what you are going through. Just keep at it and keep posting here. I'll be glad to help you with any workarounds or confusion related to moving over from FCP.
Thanks,
Kevin

How to make "two column & one column" mixed layout?

Similar Messages

Maybe you are looking for