How to make UK Airport Express work with older US Time Capsule 5GHz?

I just replaced two dead Airport Express units and the new one's fail to recognise the 5Gz network of my TC when try to set them up in AirPort Utility. The other networks I have show up but since I reserve the TC 5Ghz exclusively for music streaming around house to AEX-attached speakers, not having the new models playing along is deeply frustrating. The TC was bought in US three years ago. The AEX are UK and brand new. No problems at all with the other AEX units I have which all function perfectly. These were also US models. I'm fearing a change that prevents UK AEX from working with US TC 5GHz wifi.
Any ideas?

The US and UK will doubtless have different allowable 5ghz channels.
Firstly set the country code in the TC if possible to UK although it might not appear on the list.
Note to find the right page to enter country is simple.. start the manual setup.. in the find a setting box, type country.. the correct page will pop up. Change that to UK.. I suspect it cannot happen but try regardless.
Someone else might like to comment if you can force the firmware upgrade to use the correct version from UK.. but maybe hard written into the firmware.. and only countries listed will be those in the region the airport is sold in. Time manufacturers got rid of regional distribution.. and just select anywhere in the world.
If as I suspect no go on that one, just setup the TC to a wireless channel manually shared with UK. The problem now is the TC set to auto can choose a channel not allowed in the UK and therefore invisible to the UK Airport Express.. so lock the channel of the TC to one that is common.

Similar Messages

Make your Airport Extreme work JUST LIKE A TIME CAPSULE!

Do you own Leopard, yet can't use *Time Machine* because *_IT DOES NOT SUPPORT THE AIRPORT EXTREME'S USB HARD-DRIVE FEATURE?_* Is there an inexpensive solution to this problem, or does it require a new _Time Capsule?_
Well, the AEBS hardware does not seem to be the issue. Both a Terminal work-around and a UNIX script exist, both of which *ENABLE FULL AEBS USB DRIVE FUNCTIONALITY -- with no Time Capsule required.* Any current AEBS can function just like a Time Capsule-- here's a link to an Automator program that can run a UNIX script for you, which will set up your AEBS hard-drive for use with Time Machine:
http://www.9to5mac.com/time-machine-fix-flux-capacitor-43262455
This will *ENABLE FULL AEBS-TM FUNCTIONALITY--* +*at no extra cost!*+ This "software fix" seems to work just fine in most cases... However, it's not "official", so use at your own discretion.
*Does anyone know of any other, potentially better software fixes or work-arounds?* The more solutions there are, the more functionality that Airport Extreme owners can get from their hardware.

I've done this, and it will let you do Time Machine backups to the air disk. But I recommend against it. The issue with the AEBS seems to be the nature of network writes. The AEBS (with the current firmware) doesn't guarantee the data is written before responding to the network, so it's not a secure backup. Everything will probably be fine, until there's a power fluctuation or network dropout or something disruptive like that.
Time Machine to another Mac is also disabled, until the 10.5.2 update. I believe this release improved network writes, so you can safely back up to network volumes of any Leopard computer. I'm now able to use a network volume from my server (running regular Leopard).
I'd wait until new firmware comes out for the AEBS, that will hopefully give it the Time Capsule functionality.

How can I get Airplay to work with my 3TB Time Capsule and my two AV receivers

I have researched the net to death and my only solace is I don't appear to be alone. I have a 3TB Time Capsule that has a Denon and Pioneer receiver attached to it by ethernet. Also connected to the time capsule our three apple TV's. I can use airplay with my iPhones and iPads to the Apple TV but can't get either the Denon or the Pioneer to show up as Air Play options on any IOS Devices or my two Mac's.
I have the latest firmware on the Denon and Pioneer, the latest firmware on the Time Capsule and Mac's. I have tried power cycling, inserting a switch between the receivers and the time capsule but to no avail.
Any suggestions would be greatly

You can't officially as it relies on hardware.
A potential software solution is Airparrot.
http://airparrot.com
AC

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

HT1515 How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

Does airport express work with garage band in lion?

Actually I know it can work and there are apps out there to make it work but I heard a rumor that Apple was going to allow functionaliy between the two in Lion. So my question is...
Will Airport Express work with Garage Band in Lion or do I have to buy third party software?

I believe the HP 2840 can be connected either via Ethernet or USB. If connected to the AirPort Express Base Station (AX) by USB, only the basic printing functions will be shared out; the scanning, faxing, copying features are not supported.
If the AX is configured so that its Ethernet port is enabled, the it may be possible to gain all of the printer's features by connecting it to the AX by Ethernet. In this case, the printer will use its own Print server to share out all of these features.

Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
http://itunes.apple.com/us/app/airport-utility/id427276530
if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express, you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad. Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
http://support.apple.com/kb/HT4356
I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

Does Airport Express work with Airport Base Station (not Airport Extreme)?

I'm needing to extend the range of my Airport base station. I purchased an Airport Extreme to funcion as a repeater, but it's not working. Will Airport Express work with a (white) Airport base station. If not, how can I extend the range besides moving the base station?

Can someone actually tell me how to set-up the Airport Express (with my Airport) so that it will act like a repeater. Once again, this is an Airport and not an Airport Extreme.

Does The Airport Express Work with Any Router?

Hi Forum,
i have an old Linksys router G Wifi speeds, does the Airport Express work with this?

The AirPort Express or other Apple routers will not wirelessly extend the signal from your Linksys router, if that is what you are asking here.
If yes, use another Linksys product to insure compatibility between devices.

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

How to make "visa find resource" working with Agilent device

I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
I have checked:
1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
2.       Enable NIVISATulip.dll in NI Max Explorer
3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
I have no clue on how to make “visa find resource” working with Agilent device.
Please help.
Solved!
Go to Solution.

Quick question. Did you also enable 488 support in Agilent?
If that does'not work try this. and well see if you found a bug
Jeff

Does airport express work with PC

Does airport express work with a dell laptop?
Can one setup an airport express for the very first time using a dell laptop?

Yes on both. FWIW, I currently have a Dell laptop that has no issues connecting to my AirPort network. I also have AirPort Utility for Windows installed on this laptop when I need to administer the base station. In my case the laptop is running Windows 7.

Does Airport Express work with a Windows Computer?

Does Airport Express work with a Windows Computer?
I'm trying to setup an older Airport Express to play iTunes
with a Windows Computer. I just want it to join my network,
since I'm already connected to another router.
Thanks,
Paul

Is there a Windows version of the Airport Utility (I think that's what it's called)...
Yes. That is only needed to configure the AirPort Express (AX).
...or do I have to go through Windows setup software?
You may have to do that to get Windows to join the wireless network.

Airport express keeps loosing connection to Time Capsule

For several years I have had no issue with mt Airport Express staying connected to my Time Capsule/router. Now 2 of my Airport Expresses keep loosing the connection and flashing yellow. I have done the resets where I press in the little button on the bottom while plugging the AE back into the power source and reconnecting through Airport Utility and that will do the trick but after a short time the flashing yellow lights will go back on.
Would it help to turn off the router, rest all the AEs? It is so frustrating to keep loosing the connection and nothing else has changed; e.g. the AEs are all in the same place.

Same thing here! I didnt have the problem with airport express until I update the os from 10.6.2 to 10.6.6. I have been calling the apple support and they couldnt help (or thou sounded like they knew for that particular problem). I got from my work MacBookPro and same thing happen. I hope that apple will read this and just want to tell them that this is my 10 computer made by apple and God knows the last one! First of all they made the the fireware with the bad chipsets so I have to but extra cards and then airport. I cant connect at all to any wifi and have to put the cables on the floor from the wifi router to the ethernet input which is more than 10 metres. Apple sort this asap!!!!!!!!!!

HT4145 I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

Setup the Express to wirelessly extend the Time Capsule, or vice versa depending on which one is already set up. Or you could use bridge mode which involves using an Ethernet cable or Powerline plugs.

How to make UK Airport Express work with older US Time Capsule 5GHz?

Similar Messages

Maybe you are looking for