How to make use Modifier automatically based on Condition

Hello all,
I need help in using Advance Pricing modifier to adjust the sub total value of the sales order.
AM populating a value in sales order header DFF Attribute5 with value.Then i Compare the this value with Sub total value based on Pre book order event using plsql
If there is difference then modifier needs to be applied automatically.
Ex:
Sales Order Sub total value :1000
Value in Attribute5 = 1400
Diff amount = 1400-1000 = 400.
Now i need to make use of modifier to adjust the sub total value to 1400.
This should be done automatically..is that feasible..
if yes please advise.
else please provide best approach for the solution.
Please let me know if you need more clarity on requirement.
Thanks,Sarath.

Dear,
The scheduling is based on your MRP parameters. If you select the basic dates scheduling while running MRP, the system will consider the material master in house production time. It will not consider the routing standard values. In lead time it consider the routing value means timing form routing and component are assign to the operation so it calculated the component reqt date. And do the scheduling of order.
In OPU5 there is setting for scheduling Adjust dates to order start will work for you.
Regards,
R.Brahmankar

Similar Messages

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

After clicking on an open tab, how to make the focus automatically go to the body of page?

After clicking on an open tab, how to make the focus automatically go to the body of page?
Right now, clicking in an open tab and using arrow keys now moves through the open tabs. I liked the old versions where right after clicking in a tab you could directly go to navigate the page with the arrow keys.
Is there a something I can change in about:config to change this behavior?
Thanks in advanced.

Firefox should still set the focus the the browser area if you click a tab. 
Only with very old browser versions you could set the focus to a tab by clicking a tab.
This behavior is likely caused by an extension.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to make use of BAPI_CATIMESHEETMGR_CHANGE

Hi All,
 We need to make use of BAPI_CATIMESHEETMGR_CHANGE for changing entered hours against an activity instead of adding new row for the same(BAPI_CATIMESHEETMGR_INSERT does that ) . Please guide me what all table parameters we should supply while executing this FM.
Regards,
Ganga.

Hi Senthil,
Now I have got how to make use of BAPI insert and change. But problme is when I need to add an hours entry for , say tuesaday of activity A for which already HAS monday hours,I am using BAPI_CATIMESHEETMGR_INSERT AND IT IS ADDING ONE MORE ROW AS SHHOWN BELOW
. But it adding new row. How top overcome this.
 Monday
 A 2
After insert
 Monday Tuesday
 A 2
 A 3
=----
SHould I use delete and insert.
Please help me..;
Regards,
Ganga
Message was edited by:
 Gangadharayya Hiremath
Message was edited by:
 Gangadharayya Hiremath

In windows 7, how to make firefox start automatically when I turn on the computer

In Windows 7, how to make Firefox start automatically when I turn on the computer. Note, I am asking how to do this with Windows 7, not xp, not vista.

You need to place a shortcut to open Firefox in the Start > Programs > Startup folder. 
That is basically the same in all Windows versions.

How to make use of classlocator in NWDS.

Hi Experts,
I don't have Class / jar Locator.
I am unable to install from SourceForge Website, it is showing some error.
where can i get it ?
And how to make use of classlocator in NWDS.
Help me out in this regard.it's urgent
Regards
Bala

Hi Balakrishna,
You can download the classlocator from this URL:
http://www.filewatcher.com/b/ftp/ftp.heanet.ie/mirrors/download.sourceforge.net/pub/sourceforge/c/cl/classlocator.0.0.html
Check this thread for more help
How to use classlocator plugin?
Thanks n Regards
Santosh
Reward if helpful !!!

How to make use of the XFList in the Function Bar of the XML Form Builder?

Hello:
    Now I am creating blog using the XML Form Builder.
    In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
    I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
lexian
Thanks a lot!

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

How to make use of 'Icon Name' in Logical link?

I see the option 'Icon name' in 'define logical links' in SPRO. It does not however has an F4. I tried giving the name of image in the relevant skin. But no image appears besides the logical link. Is there something else that needs to be done to get an image besides workcenter link? How to make use of this 'Icon Name' in logical link?

Hi,
i guess this icon_name is not possible for every skin in CRM70.
We use nova skin - here it is not possible.
With default skin i saw icons for example on the salespro startpage.
Kind regards
Manfred

How to make use of 32bit packages on Arch64

Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
Last edited by kaola_linux (2008-12-09 15:24:36)

kaola_linux wrote:
Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
You can reuse the packages in /var/cache/pacman/pkg/ on your Arch32.
You can use these saved packages in a 32bit chroot ENV on your Arch64. Just pacman -U all of them.

How to make use of StreamGobbler?

Hi,
I want to redirect the out and err statements to a file.
I found a class called StreamGobbler at http://www.physionet.org/physiotools/puka/sourceCode/puka/StreamGobbler.java
I dont know how to make use of it as I have almost no knowledge of Concurrency and threads in Java.
Plz guide.

I found a class called StreamGobbler at
http://www.physionet.org/physiotools/puka/sourceCode/p
uka/StreamGobbler.javaDo you see, at the very top of that page, the URL for the original article? It explains everything step by step in great detail.

How to make use of the FM EDIT_TEXT_FORMAT_DOC

Hi frnz,
How to make use of the FM
EDIT_TEXT_FORMAT_DOC
Could anyone explain with an example how to use this
regards

hi
I need an example please....
did any one use that FM
Regards

How to make use of iPhone to do recording?

Hi,
how to make use of iPhone to be a recording device for vocal?

The Voice Memos app included with the iPhone is the best and only way to make use of the iPhone for recording with included apps, which is also free since it is included by Apple with the iPhone. And recordings made with the Voice Memos app are synced with your iTunes library on your computer - transferred to your iTunes library on your computer when syncing your iPhone with iTunes.

How to make use Modifier automatically based on Condition

Similar Messages

Maybe you are looking for