How to make use of external procedure

I want to use external procedure(such as *.exe ,*.dll) in the
bc4j(or application module) , how should i do?
thank you in advance!

The Voice Memos app included with the iPhone is the best and only way to make use of the iPhone for recording with included apps, which is also free since it is included by Apple with the iPhone. And recordings made with the Voice Memos app are synced with your iTunes library on your computer - transferred to your iTunes library on your computer when syncing your iPhone with iTunes.

Similar Messages

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

How do i use an external display with my macbook pro?

How do I use an external display with a macbook pro?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

How do i use an external hard drive for all my itunes music?

how do i use an external hard drive for all my itunes music?

Hi valleydave,
Here are two good links for you to check out:
http://support.apple.com/kb/ht1751
http://support.apple.com/kb/ht1449
The first one goes over, in-depth, what you're looking for in regards to "off site" iTunes.

How do I use an external hard drive with iMovie 10.0.1? I have run out of disk space on my Macbook Air.

How do I use an external drive with iMovie 10.0.1? It is not obvious and I have run out of space.

If you want to move a complete iMovie 10 library (file with .imovielibrary extension) click on the library in the libraries pane and select File - Consolidate Library Media. This ensures that all media is copied to the library. You can then move the library onto your external drive using Finder. The first time to want to access it from iMovie you will have to tell it where it is by choosing File - Open Library -Other and navigating to it.
If you only want to transfer part of a library to another drive, create a new library a at the desired location File - Open Library - New and copy projects and events to it from within iMovie.
Its all described in iMovie help - "Work with multiple libraries".
Geoff.

How Do I use my External Drive for my iTunes Library without adding anything to my Mac's HD?

I have a new MBP and have transferred all of my music off my old pc (250+ gigs) to a Lacie 1TB thunderbolt external drive. How do I use the external as my primary itunes library with out using any of my Mac's HD? I'm new to mac so I have a few more questions...
1. The initial question above
2. will this work or will there be extra steps every time I disconnect and connect the external (other than ejecting)?
3. Will I be able to access it remotely / home sharing?
4. Would this work with itunes match?
Thanks All !!!

DevonC wrote:
I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
Thanks!!!
There are several ways to do exactly this.
If you partition the external drive, you can use one partition for TM and the other for anything else.
Even if you do not partition the drive, you can safely store other data in folders on the drive. Just to not use the folder that TM creates for anything. And it's best not to put files directly on the drive, in my opinion, but use folders for storage.
Just remember that whatever you put on the drive takes up room from TM and when the drive gets nearly full, TM will start automatically deleting older files from it's own folder.
I have my Tiger clone on my external TM drive in a separate partition and everything works fine.

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to make use of BAPI_CATIMESHEETMGR_CHANGE

Hi All,
       We need to make use of BAPI_CATIMESHEETMGR_CHANGE for changing entered hours against an activity instead of adding new row for the same(BAPI_CATIMESHEETMGR_INSERT does that ) . Please guide me what all table parameters we should supply while executing this FM.
Regards,
Ganga.

Hi Senthil,
Now I have got how to make use of BAPI insert and change. But problme is when I need to add an hours entry for , say tuesaday of activity A for which already HAS monday hours,I am using BAPI_CATIMESHEETMGR_INSERT AND IT IS ADDING ONE MORE ROW AS SHHOWN BELOW
. But it adding new row. How top overcome this.
<b>       Monday
      A     2</b>
After insert
<b>      Monday Tuesday
      A     2
      A            3</b>
=----
SHould I use delete and insert.
Please help me..;
Regards,
Ganga
Message was edited by:
        Gangadharayya Hiremath
Message was edited by:
        Gangadharayya Hiremath

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

How to make use of classlocator in NWDS.

Hi Experts,
I don't have Class / jar Locator.
I am unable to install from SourceForge Website, it is showing some error.
where can i get it ?
And how to make use of classlocator in NWDS.
Help me out in this regard.it's urgent
Regards
Bala

Hi Balakrishna,
You can download the classlocator from this URL:
http://www.filewatcher.com/b/ftp/ftp.heanet.ie/mirrors/download.sourceforge.net/pub/sourceforge/c/cl/classlocator.0.0.html
Check this thread for more help
How to use classlocator plugin?
Thanks n Regards
Santosh
Reward if helpful !!!

How to make use of the XFList in the Function Bar of the XML Form Builder?

Hello:
    Now I am creating blog using the XML Form Builder.
    In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
    I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
lexian
Thanks a lot!

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

How to make use of 'Icon Name' in Logical link?

I see the option 'Icon name' in 'define logical links' in SPRO. It does not however has an F4. I tried giving the name of image in the relevant skin. But no image appears besides the logical link. Is there something else that needs to be done to get an image besides workcenter link? How to make use of this 'Icon Name' in logical link?

Hi,
i guess this icon_name is not possible for every skin in CRM70.
We use nova skin - here it is not possible.
With default skin i saw icons for example on the salespro startpage.
Kind regards
Manfred

How to make use of 32bit packages on Arch64

Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
Last edited by kaola_linux (2008-12-09 15:24:36)

kaola_linux wrote:
Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
You can reuse the packages in /var/cache/pacman/pkg/ on your Arch32.
You can use these saved packages in a 32bit chroot ENV on your Arch64. Just pacman -U all of them.

How to make use of external procedure

Similar Messages

Maybe you are looking for