How to make use of GS01 for GGB0

Hi:
        I am creating the following validation in GGB0 for line items
Prerequisites
BKPF-TCODE = 'FBZ1'
Check
BSEG-HKONT = '621012'
Message
Assign an error message and then activate it OB28.
Issue here is i have around 160 GLs (BSEG-HKONT ), how can i use GS01 for creating validation becuase writing 160 GLs in Check seems an hectic task to do. Please guide if we create set in GS01 , then what we will write in Check in place of BSEG-HKONT .
BR

Hi:
       Issue is till not resolved..I think  i should elaborate my requirment in brief first
F-28 and F-29 are t codes for booking incoming transactions.. Hence incoming Bank GLs are used in it, sometime end users enter outgoing and main bank accounts in it that is wrong..For this i created two sets of GLs one for  main bank GLs and other for outgoing bank GLs
in Check i entered these sets as
BSEG-HKONT IN ZMGL OR BSEG-HKONT IN ZOGL
Assigned an error message to it and activated in OB28
Now i go to F-28 and enter a valid GLs that is not in the sets ZMGL or ZOGL , sytem is throwing error message for it too which i should not . Why is it happening i am unable to understand.
Br
Edited by: SAP Profesional on Nov 16, 2011 11:30 AM

Similar Messages

  • How to make use of 3EC_CS_1R for remote cube.

    hi all,
    I have activated the 3EC_CS_1A for consolidation reports but would like to use 3EC_CS_1R DataSource for remote cube, we have not installed SEM-BCS on the BI system, when trying to use the 3EC_CS_1R on the BI system, it complaints the DataSource can only be used by SEM-BCS. what is the best way to utilise this DataSource?
    do I need to install SEM-BCS in order to use this DataSource? Can I just install BCS component only?
    I am slightly confused as where SEM-BCS should be installed, on BI or ECC system?
    cheers.
    Message was edited by: Joe
            Joe Wong

    no longer relevant

  • How to make use of ALEAUD for receiving acknowledgement

    In a IDOC-->XI--> file  scenario, how to get the acknwledgement of the message received by the Receiver Business System,  by making use of ALEAUD in Partner Profile ?

    Dhar,
    Check this document:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    Also the receiver file adapter supports system acknowledgments but not application acknowledgments.
    Regards,
    ---Satish

  • How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

    This message refers to the VIs found at this link:
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
    How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

    Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • How to make use of SE37- Function Module & how to find out the table?

    Hi ,
    1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
    For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
    But after giving the particular name what should i do?
    Please help me.
    2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
    Thanks in adavnce for spending some time
    Raj.S

    Hi Raj
    Function Modules
    Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
    Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating  and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
    Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
    The Function Builder  also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
    Check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
    By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

  • How to make use of BAPI_CATIMESHEETMGR_CHANGE

    Hi All,
           We need to make use of BAPI_CATIMESHEETMGR_CHANGE for changing entered hours against an activity instead of adding new row for the same(BAPI_CATIMESHEETMGR_INSERT does that ) . Please guide me what all table parameters we should supply while executing this FM.
    Regards,
    Ganga.

    Hi Senthil,
    Now I have got how to make use of BAPI insert and change. But problme is when I need to add an hours entry for , say tuesaday of activity A for which already HAS monday hours,I am using  BAPI_CATIMESHEETMGR_INSERT AND IT IS ADDING ONE MORE ROW AS SHHOWN BELOW
    . But it adding new row. How top overcome this.
    <b>       Monday
          A     2</b>
    After insert
    <b>      Monday  Tuesday
          A     2
          A            3</b>
    =----
    SHould I use delete and insert.
    Please help me..;
    Regards,
    Ganga
    Message was edited by:
            Gangadharayya Hiremath
    Message was edited by:
            Gangadharayya Hiremath

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of classlocator in NWDS.

    Hi Experts,
    I don't have Class / jar Locator.
    I am unable to install from SourceForge Website, it is showing some error.
    where can i get it ?
    And how to make use of classlocator in NWDS.
    Help me out in this regard.it's urgent
    Regards
    Bala

    Hi Balakrishna,
    You can download the  classlocator  from this URL:
    http://www.filewatcher.com/b/ftp/ftp.heanet.ie/mirrors/download.sourceforge.net/pub/sourceforge/c/cl/classlocator.0.0.html
    Check this thread for more help
    How to use classlocator plugin?
    Thanks n Regards
    Santosh
    Reward if helpful !!!

  • How to make use of the XFList in the Function Bar  of the XML Form Builder?

    Hello:
        Now I am creating blog using the XML Form Builder.
        In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
        I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
    lexian
    Thanks a lot!

    In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
    SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
    The first text box under Groups attribute corresponds to SCREEN-GROUP1,
    2nd text box for SCREEN-GROUP2
    3rd text box for SCREEN-GROUP3
    4th text box for SCREEN-GROUP4
    Hope this helps.
    Thanks,
    Balaji

  • How to make use of label printing in sap smartforms

    Hi Dear,
    How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
    come as four labels.All page should follow the same procedure... How to do...please help me..
    Regards,
    Nikhil

    Hi,
    Please go through below link, would be helpfull for you.
    [http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

  • How to make use of 'Icon Name' in Logical link?

    I see the option 'Icon name' in 'define logical links' in SPRO. It does not however has an F4. I tried giving the name of image in the relevant skin. But no image appears besides the logical link. Is there something else that needs to be done to get an image besides workcenter link? How to make use of this 'Icon Name' in logical link?

    Hi,
    i guess this icon_name is not possible for every skin in CRM70.
    We use nova skin - here it is not possible.
    With default skin i saw icons for example on the salespro startpage.
    Kind regards
    Manfred

  • How to make use of StreamGobbler?

    Hi,
    I want to redirect the out and err statements to a file.
    I found a class called StreamGobbler at http://www.physionet.org/physiotools/puka/sourceCode/puka/StreamGobbler.java
    I dont know how to make use of it as I have almost no knowledge of Concurrency and threads in Java.
    Plz guide.

    I found a class called StreamGobbler at
    http://www.physionet.org/physiotools/puka/sourceCode/p
    uka/StreamGobbler.javaDo you see, at the very top of that page, the URL for the original article? It explains everything step by step in great detail.

  • How to make use of iPhone to do recording?

    Hi,
    how to make use of iPhone to be a recording device for vocal?

    The Voice Memos app included with the iPhone is the best and only way to make use of the iPhone for recording with included apps, which is also free since it is included by Apple with the iPhone. And recordings made with the Voice Memos app are synced with your iTunes library on your computer - transferred to your iTunes library on your computer when syncing your iPhone with iTunes.

  • How to make use of customer reserve pricing types in copying control

    Hi All
    Please inform how to make use of 'customer reserve' pricing types like 'X,Y,Z & 1-9' keys in copying control.
    Right now I'm on maintenance & supporting project for european client.  They used pricing type 'Z' for copying condition records from stadard sales order to returns(RE) order.  I wanted to know that what is 'Z' and how it is functioning to resolve one urgent ticket assigned to me.
    Could you please guide me where should I verify its logic.
    Thanks & Regards
    Seshu

    Hi Seshu,
    Pricing type changes will done at user exit level. You may want to look at the user exit USEREXIT_PRICING_RULE (module pool SAPLV61A, program RV61AFZA)
    Also, OSS note 24832 will help you to get an understanding.
    Regards,
    Please reward points if helpful

Maybe you are looking for