How to make use of variable present in sap standard FM to custom badi.

Hi All,
Scenario: I am using a transaction which makes use of SAP standard FM. Also I have used a zbadi to achieve my requirement. While debugging, I found that when the control goes to zbadi, i am unable to make use of the variables which are defined in standard FM.
Now my requirement is to make use of variables present in standard FM into zbadi. Can anyone suggest me how to achieve this?
Thanks in Advance......[:)]
Regards,
Vinit

if your system is NetWeaver 7.0 (ECC 6...), then you can use enhancement framework to add your code to the function module.
Otherwise, you can only access them if they have global scope, using ASSIGN ('(SAPLfunction group name)GLOBALVARNAME') TO <fieldsymbol> (be careful, you could change variable value, so make sure you don't)

Similar Messages

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

How can I use environment variables in a controller?

Hi all,
How can I use environment variables in a controller?
I want to pass a fully qualified directory and file name to FileInputStream and would like to do it by resolving an env variable, such as $APPLTMP.
Is there a method somewhere that would resolve this??
By the way,Did anyone used the class of "oracle.apps.fnd.cp.request.RemoteFile"?
The following is the code.
My EBS server is installed with 2 nodes(one for current,and other is for application and DB).I want to copy the current server's file to the application server's $APPLTMP directory. But the result of "mCtx.getEnvStore().getEnv("APPLTMP")" is current server's $APPLTMP directory.
Can anyone help me on this?
private String getURL()
throws IOException
File locC = null;
File remC = new File(mPath);
String lurl = null;
CpUtil lUtil = new CpUtil();
String exten;
Connection lConn = mCtx.getJDBCConnection();
ErrorStack lES = mCtx.getErrorStack();
LogFile lLF = mCtx.getLogFile();
String gwyuid = mCtx.getEnvStore().getEnv("GWYUID");
String tmpDir = mCtx.getEnvStore().getEnv("APPLTMP");
String twoTask = mCtx.getEnvStore().getEnv("TWO_TASK");
// create temp file
mLPath = lUtil.createTempFile("OF", exten, tmpDir);
lUtil.logTempFile(mLPath, mLNode, mCtx);
Thanks,
binghao

However within OAF on the application it doesn't.
what doesnt work, do you get errors or nothing ?XX_TOP is defined in adovars.env only. Anywhere else this has to go?
No, it is read from the adovars.env file only.Thanks
Tapash

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to make use of BAPI_CATIMESHEETMGR_CHANGE

Hi All,
       We need to make use of BAPI_CATIMESHEETMGR_CHANGE for changing entered hours against an activity instead of adding new row for the same(BAPI_CATIMESHEETMGR_INSERT does that ) . Please guide me what all table parameters we should supply while executing this FM.
Regards,
Ganga.

Hi Senthil,
Now I have got how to make use of BAPI insert and change. But problme is when I need to add an hours entry for , say tuesaday of activity A for which already HAS monday hours,I am using BAPI_CATIMESHEETMGR_INSERT AND IT IS ADDING ONE MORE ROW AS SHHOWN BELOW
. But it adding new row. How top overcome this.
<b>       Monday
      A     2</b>
After insert
<b>      Monday Tuesday
      A     2
      A            3</b>
=----
SHould I use delete and insert.
Please help me..;
Regards,
Ganga
Message was edited by:
        Gangadharayya Hiremath
Message was edited by:
        Gangadharayya Hiremath

How to make use of classlocator in NWDS.

Hi Experts,
I don't have Class / jar Locator.
I am unable to install from SourceForge Website, it is showing some error.
where can i get it ?
And how to make use of classlocator in NWDS.
Help me out in this regard.it's urgent
Regards
Bala

Hi Balakrishna,
You can download the classlocator from this URL:
http://www.filewatcher.com/b/ftp/ftp.heanet.ie/mirrors/download.sourceforge.net/pub/sourceforge/c/cl/classlocator.0.0.html
Check this thread for more help
How to use classlocator plugin?
Thanks n Regards
Santosh
Reward if helpful !!!

How to make use of the XFList in the Function Bar of the XML Form Builder?

Hello:
    Now I am creating blog using the XML Form Builder.
    In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
    I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
lexian
Thanks a lot!

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

How to make use of 'Icon Name' in Logical link?

I see the option 'Icon name' in 'define logical links' in SPRO. It does not however has an F4. I tried giving the name of image in the relevant skin. But no image appears besides the logical link. Is there something else that needs to be done to get an image besides workcenter link? How to make use of this 'Icon Name' in logical link?

Hi,
i guess this icon_name is not possible for every skin in CRM70.
We use nova skin - here it is not possible.
With default skin i saw icons for example on the salespro startpage.
Kind regards
Manfred

How to make use of 32bit packages on Arch64

Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
Last edited by kaola_linux (2008-12-09 15:24:36)

kaola_linux wrote:
Hello everyone, I recently installed arch 64bit which was not yet fully tweaked to suit my needs.
My 32bit version has some nice apps and I would like to know how to make use of them or even reuse them so that I won't download things anymore because I have a slow internet connection...:)
Arch x86_64 / XFCE4
Thanks in advance
You can reuse the packages in /var/cache/pacman/pkg/ on your Arch32.
You can use these saved packages in a 32bit chroot ENV on your Arch64. Just pacman -U all of them.

How to make use of StreamGobbler?

Hi,
I want to redirect the out and err statements to a file.
I found a class called StreamGobbler at http://www.physionet.org/physiotools/puka/sourceCode/puka/StreamGobbler.java
I dont know how to make use of it as I have almost no knowledge of Concurrency and threads in Java.
Plz guide.

I found a class called StreamGobbler at
http://www.physionet.org/physiotools/puka/sourceCode/p
uka/StreamGobbler.javaDo you see, at the very top of that page, the URL for the original article? It explains everything step by step in great detail.

How to make use of the FM EDIT_TEXT_FORMAT_DOC

Hi frnz,
How to make use of the FM
EDIT_TEXT_FORMAT_DOC
Could anyone explain with an example how to use this
regards

hi
I need an example please....
did any one use that FM
Regards

How to make use of iPhone to do recording?

Hi,
how to make use of iPhone to be a recording device for vocal?

The Voice Memos app included with the iPhone is the best and only way to make use of the iPhone for recording with included apps, which is also free since it is included by Apple with the iPhone. And recordings made with the Voice Memos app are synced with your iTunes library on your computer - transferred to your iTunes library on your computer when syncing your iPhone with iTunes.

How to make use of variable present in sap standard FM to custom badi.

Similar Messages

Maybe you are looking for