How to make use of VM with Hyperion

Hi All,
I am trying to install Hyperion DRM. I was told that we may use Virtual machine (VM), for the working on DRM. Please let me, How to do it?
Thanks
Anmol

A VM is like any other server, it just sits on another OS as an "application" within a larger "host" environment.
What that means: you would typically use remote console access to address the VM rather than the host, install the software on the VM rather than the host, etc...
There would be no other special needs apart from any infrastructure requirements themselves. For all intents and purposes, the host doesn't matter at all (and the VM itself can be run on any supported host, making it more flexible -- but all of this is transparent to the process).
You're IT department should have all the pertinent details, of course, but there is nothing on the installation/configuration side of things that needs to know that you are using a VM.

Similar Messages

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How to make use of 'Icon Name' in Logical link?

I see the option 'Icon name' in 'define logical links' in SPRO. It does not however has an F4. I tried giving the name of image in the relevant skin. But no image appears besides the logical link. Is there something else that needs to be done to get an image besides workcenter link? How to make use of this 'Icon Name' in logical link?

Hi,
i guess this icon_name is not possible for every skin in CRM70.
We use nova skin - here it is not possible.
With default skin i saw icons for example on the salespro startpage.
Kind regards
Manfred

How to make use of the FM EDIT_TEXT_FORMAT_DOC

Hi frnz,
How to make use of the FM
EDIT_TEXT_FORMAT_DOC
Could anyone explain with an example how to use this
regards

hi
I need an example please....
did any one use that FM
Regards

How to make use of iPhone to do recording?

Hi,
how to make use of iPhone to be a recording device for vocal?

The Voice Memos app included with the iPhone is the best and only way to make use of the iPhone for recording with included apps, which is also free since it is included by Apple with the iPhone. And recordings made with the Voice Memos app are synced with your iTunes library on your computer - transferred to your iTunes library on your computer when syncing your iPhone with iTunes.

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now ?

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now that they do not have the spry option?

bbull2005 wrote:
Preran, why wouldn't Dreamweaver include it's own menu/navigation bar widget?
I can't answer on Preran's or Adobe's behalf, but I think you'll find at least part of the answer here: http://wiki.jqueryui.com/w/page/38666403/Menubar
Adobe decided to discontinue development of Spry in August last year, and Dreamweaver CC made the switch to using jQuery UI widgets and effects. One reason for dropping Spry was that it failed to work correctly in some browsers. Judging from the fact that the jQuery UI menubar is now "on ice", creating a flyout menu that works reliably across all devices is proving more difficult than originally envisaged.
Because all other widgets in Dreamweaver CC use jQuery UI, it's a reasonable assumption that Adobe hoped the jQuery UI menubar would be ready in time, but it wasn't.

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

How can i use my iphone with more than one itunes

how can i use my iphone with more than one itunes

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
tt2

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

How to make Dynamically Shortened Text With "Show More"

Hi there! i want to know how to make dynamically shortened text with show more or read more in my website using HTML 5 pages or ASP.NET ?
example like these paragraphs
Lorem Ipsum är en utfyllnadstext från tryck- och förlagsindustrin. Lorem ipsum har varit standard ända sedan 1500-talet, när en okänd boksättare tog att antal bokstäver och blandade dem för att göra ett provexemplar av en bok. Lorem ipsum har inte bara överlevt fem århundraden, utan även övergången till elektronisk typografi utan större förändringar. Det blev allmänt känt på 1960-talet i samband med lanseringen av Letraset-ark med avsnitt av Lorem Ipsum, och senare med mjukvaror som Aldus PageMaker.
Det är ett välkänt faktum att läsare distraheras av läsbar text på en sida när man skall studera layouten. Poängen med Lorem Ipsum är att det ger ett normalt ordflöde, till skillnad från "Text här, Text här", och ger intryck av att vara läsbar text. Många publiseringprogram och webbutvecklare använder Lorem Ipsum som test-text, och en sökning efter "Lorem Ipsum" avslöjar många webbsidor under uteckling. Olika versioner har dykt upp under åren, ibland av olyckshändelse, ibland med flit (mer eller mindre humoristiska).
I motsättning till vad många tror, är inte Lorem Ipsum slumvisa ord. Det har sina rötter i ett stycke klassiskt litteratur på latin från 45 år före år 0, och är alltså över 2000 år gammalt. Richard McClintock, en professor i latin på Hampden-Sydney College i Virginia, översatte ett av de mer ovanliga orden, consectetur, från ett stycke Lorem Ipsum och fann dess ursprung genom att studera användningen av dessa ord i klassisk litteratur. Lorem Ipsum kommer från styckena 1.10.32 och 1.10.33 av "de Finibus Bonorum et Malorum" (Ytterligheterna av ont och gott) av Cicero, skriven 45 före år 0. Boken är en avhandling i teorier om etik, och var väldigt populär under renäsanssen. Den inledande meningen i Lorem Ipsum, "Lorem Ipsum dolor sit amet...", kommer från stycke 1.10.32.
Den ursprungliga Lorem Ipsum-texten från 1500-talet är återgiven nedan för de intresserade. Styckena 1.10.32 och 1.10.33 från "de Finibus Bonorum et Malorum" av Cicero hittar du också i deras originala form, åtföljda av de engelska översättningarna av H. Rackham från 1914.

Moved to the main Dreamweaver support forum.
There are several ways you could approach this. Here's one you might try:
Give the first paragraph an ID, such as "first", and wrap the paragraphs you want to hide in a <div> with another ID, such as "more". Then add the following block of JavaScript just before the closing </body> tag of the page:
<script>
var first = document.getElementById('first'),
     more = document.getElementById('more'),
     trigger = document.createElement('span');
trigger.id = 'trigger';
trigger.innerHTML = 'Show less';
first.appendChild(trigger);
function toggleDiv() {
var state = more.className,
       text = trigger.innerHTML;
more.className = (state == 'open') ? 'closed' : 'open';
trigger.innerHTML = (text == 'Show more') ? 'Show less' : 'Show more';
toggleDiv();
if (trigger.addEventListener) {
    trigger.addEventListener('click', toggleDiv, false);
} else if (trigger.attachEvent) {
trigger.attachEvent('onclick', toggleDiv);
} else {
trigger.onclick = toggleDiv;
</script>
This gets references to the "first" paragraph and the "more" <div>. It also creates a <span> with the ID "trigger" that's appended to the "first" paragraph. The rest of the script defines a function called toggleDiv(), which toggles the "more" <div> open and closed, and changes the text in the "trigger" <span>.
You also need to create the following style rules for the various elements:
<style>
#trigger {
    text-decoration: underline;
    color: blue;
    cursor: pointer;
#more {
    transition: ease-out .7s;
    overflow: hidden;
#more p:first-child {
    margin-top: 0;
#more.closed {
    height: 0;
    -webkit-transform: translateY(-600px);
    transform: translateY(-600px);
#more.open {
    -webkit-transform: translateY(0);
    transform: translateY(0);
    max-height: 600px;
#more + p {
    margin-top: 0;
</style>
This solution hides the text and creates the "trigger" <span> only if JavaScript is enabled in the browser. It should work in all browsers, including Internet Explorer 8 and earlier.

How do I use my ipad with Apple TV?

How do i use my iPad2 with Apple TV?

If it's an ATV2 or 3, you can use AirPlay. AirPlay automatically becomes available when the two devices are on the same Wi-Fi network.
HOWEVER! You should be aware of that AirPlay is, in some circumstances, far inferior to VGA / HDMI-cabled solutions. Please see my posts at https://discussions.apple.com/message/18697551?ac_cid=sa123456#18697551 for more info.

How do I use apple remote with iPhone 5 ?

How do I use apple remote with iPhone 5 ?

Iphones dont have ir at all which the remote use for comm
Only option is to use a dock which have ir

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

Hello Daijalove97,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
To use your Apple ID at the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In from the Store menu.
Enter your Apple ID and password, then click Sign In.
Click Review when asked to review your information.
Enter your billing information, a credit card will be required.
Click Continue when you're done entering your credit card and billing information.
Best of luck,
Mario

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How to make use of VM with Hyperion

Similar Messages

Maybe you are looking for