How to make web links open larger in firefox

Firefox is my default internet. IGoogle is my home page. I have XPWindows. I recently had Firefox put in and use that as my default internet connection. When I click on a web page, it does not fill my screen - there's anywhere from 2 to 4 inches of white on each side of the web page. With my old default page, it filled the entire screen. How do I make it fill the whole screen?

Hello,
Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''&#43''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you.

Similar Messages

  • The tab: how to make web links open in Firefox cannot be deleted only closed each time I log into my browser....

    The above tab cannot be deleted, it comes back each time I log in.

    You can check for problems with preferences.
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • How to make a link open in another frame in RH 7?

    Hello! In RoboHelp 7 I am doing a prototype for my work group using framesets. We want a navigation pane on the left side of every topic. I have learned how to create framesets and set the left and right frames to different topics. I cannot find information anywhere on how to do one thing. One, how do I set the links in the left navigation frame to open in the right (main) frame? Sounds like a simple thing, but I can't figure out how. Also, is it true that a person cannot see the code to the frameset? I can't find a way to do that, either. Thanks for anyone's help!

    Hi there
    When you created your Frameset you likely gave each frame a name. This part is very important and I'm not sure RoboHelp would even allow you to create the Frameset without naming each frame.
    So when you create your links, you target the Frame by clicking the drop-down and choosing the frame name.
    Click image below for possible larger view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How to make smb:// links open directly in Finder?

    Hello,
    When I click on an afp or ftp link (such as ftp://abcd.defg.com/xyz/ or afp://mac.local/xyz/), in my emails (Eudora), the request is transmitted to the Finder, and I end up with a window opened in the /xyz/ folder.
    This is the case because the email client is informed to do so with these links.
    However, when I click on an smb:// link (to reach a folder on a PC), then Safari is chosen be default, and can't do much more than opening a window with an error message, of course.
    When I try to change this, the email client asks for a program to do smb (Finder I suppose), but then, Finder is a strange software. It is there:
    /System/Library/CoreServices/Finder.app
    But when I try to tell Eudora to take is as the app for smb:// links, its icon is grayed, looking like a document and not an app (when all other apps are recognised as such).
    How can I solve this?
    It would be VERY usefull for my co-workers to be able to go directly to an smb mount from their email message.
    Thank you,

    Rick,
    Sorry about the misgiving adresses, folders and access rights. My question is not about these three (they were just here to tell the story). You're perfectly right to say that in a local network, there's not need to complete the full IP or ".com" name of the PCs (even if it works all the same).
    When I said "of course" for the perms, it was just to mean, in the same way, that it's not this kind of problems here.
    My question is much more a human/mac graphic interface problem than a network problem. I want the people (as well as myself) to be able to go in a folder on the pc network with a simple click on an smb link in an email message (as they do now on an ftp or afp link).
    Thanks for the bother,

  • How to make a link open up a mobile app?

    I have a mobile website and I would like the links to social medias to open up the associated app rather than a url in a browser.
    For example, when I click the link to my facebook page, how can i get it to open up the facebook app?
    Thank you

    Following URL's should work for in iOS for FB - http://iphonedevtools.com/?p=302.
    For eg. fb://feed would open up the installed Facebook app in your iPhone and will take you to your News feed page.
    Simiarly, try these links for Twitter - http://handleopenurl.com/scheme/twitter.
    Thanks,
    Vinayak

  • Make every link open in a new tab?

    How to make every link open in a new tab?

    Hello Sammy90
    first be sure that you have the next 2 options in [http://kb.mozillazine.org/About:config about:config] :
    * '''browser.link.open_newwindow''' = 3
    * '''browser.link.open_newwindow.restriction''' = 2
    to check that :
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # in the search field type(or copy paste from here) '''browser.link.open_newwindow'''
    # if the value is 3, you are ok, otherwise double-click on it and change the value to 3, click OK to save it
    do the same with '''browser.link.open_newwindow.restriction''', remember we need 2 as value.
    '''now''' do the same with '''browser.link.open_newwindow.override.external''' and '''change''' the value to '''3''' (it is -1 by default).
    probably you are OK now.
    thank you

  • How do you make a link open on a new page (typically the target="_blank" command) in MUSE?

    how do you make a link open on a new page (typically the target="_blank" command) in MUSE?

    Newer version does not have the same interface.  I'm stuck trying to understand how to add a "blank" target to a hyperlink...  See how your screenshot has a dropdown associated with the "Hyperlink" object?  Mine doesn't...

  • How to make a link page come up in seperate window

    Am not sure how to make a link page to anther site for
    insatance come up in seperate window so that they do not navigate
    away from my site.Thanks Tony

    Select the item you want to use as a link. In the property
    inspector, type
    in the full path to the website you want to link to and set
    the Target to
    _blank.
    Nadia
    Adobe� Community Expert : Dreamweaver
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    http://www.perrelink.com.au
    - Web Dev
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    http://www.adobe.com/devnet/dreamweaver/css.html
    "chesterarebest" <[email protected]> wrote
    in message
    news:e88357$ifp$[email protected]..
    > Am not sure how to make a link page to anther site for
    insatance come up
    > in seperate window so that they do not navigate away
    from my site.Thanks
    > Tony

  • Make Mailto links open in gmail from Safari

    Any way to make mailto links open in gmail web interface. I don't want to install google's gmail notification thing. Has anyone got a script or bookmarklet or something?

    Hi,
    If you are reluctant to go down the route of stand-alone application wrappers, I think your best bet is probably a Greasemonkey script of some sort. You will need to install SIMBL followed by GreaseKit. And while not all Greasemonkey scripts will work with GreaseKit due to differences between FireFox and Safari's JavaScript engines, you'll probably be able to find a few that will do the job, e.g. Mailto Compose In Gmail.
    It's not an ideal solution, but hopefully it should handle all mailto links originating from Safari.
    Yang

  • How to make downloadable links in Adobe Muse

    I am new to website design and am trying to figure out how to make downloadable links for some PDF flyers, PSD templates I am creating.   Not sure if "downloadable links" is the correct term for what I'm trying to say but in a nutshell I am creating Business Flyer's in PDF form and Photoshop PSD template files that I would like to be able to have my users click a link that allows them to download them right to their desktop.  Any help would really be appreciated!

    Hi caybar10gaming,
    I had the same question as you and was searching online for how to add "downloadable links" as well so your not alone in that lol. Anyways, I found this video that explains how to do this. I hope this helps you, as it did me. Good Luck  
    http://tv.adobe.com/watch/muse-feature-tour/add-and-link-to-any-type-of-file/
    -Caitlin

  • Adobe Bridge 5.0.2.4 (CS6) - How to make Web Gallery.

    Adobe Bridge 5.0.2.4 (CS6) - How to make web gallery.

    System Info:
    Windows 7 x64 SP1
    Dell T1650
    8GB RAM
    Xeon E3-1220 V2
    Crash log;
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Bridge.exe
      Application Version:          5.0.2.4
      Application Timestamp:          50d99f7a
      Fault Module Name:          StackHash_59c3
      Fault Module Version:          6.1.7601.17725
      Fault Module Timestamp:          4ec49b8f
      Exception Code:          c0000374
      Exception Offset:          000ce6c3
      OS Version:          6.1.7601.2.1.0.256.48
      Locale ID:          3081
      Additional Information 1:          59c3
      Additional Information 2:          59c39f5460f96c9e8c0a2e4cf426da4f
      Additional Information 3:          f054
      Additional Information 4:          f054c556062bcb3c14c6b443b38515c8
    Event Viewer log;
    Faulting application name: Bridge.exe, version: 5.0.2.4, time stamp: 0x50d99f7a
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x1fe0
    Faulting application start time: 0x01ce7e8d7553cc63
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: b3e6d539-ea80-11e2-92af-b8ca3a7791fa

  • How to make a link to an image in flash?

    Hi,
    I´m new in Flash CS3 and I´m trying to get some
    answers to my problem.. The question is
    that how do I create a link to an image in flash??
    I know how to make a link to a text field but I really
    don´t know how this could get working properly.. :/

    Link to an external URL image? In AS 2 the code is
    'getURL("putaddresshere")' and in AS 3 it's 'navigateToURL("")' ...
    If it's a simple image, it's easier just to import it to the
    stage, save it as a symbol, put it in a timeline frame and then
    code your link so on click or rollover it goes
    'gotoAndPlay(framenumber)'.

  • How to make fonts on menus larger

    I just installed elements 11. The font size on many of the selections is small, too small to easily see with my level of vision (bifocals). Examples are the Quick and Guided edit menu picks, the popups when you curser over a tool. Can anyone tell me how to make the type size larger?
    Thanks!
    Tucker Cox

      You may need to reduce the display setting via the control panel below the native resolution of your monitor.
    However this may affect the appearance of other applications.

  • How to make a link in textflow that send parameters to a function?

    How to make a link in textflow that send parameters to a function?

    In the examples included with the weekly builds there is a CustomLinkEventHandler.as example.  Passing parameters would be done in the CustomClickHandler function.  You could attach the parameters to the LinkElement as user styles using the setStyle API.
    Hope that helps,
    Richard

  • How to make relative links

    Hello.
    I need your help.
    Inside the public_html folder I have two files one index.dir and part1.dir The file (index.dir) I wanted to do html and I do the Regulating through public settings
    My problem is that it will link files? I do not know how to do it and I want your help please.
    How to make relative links?
    Information my project test:
    Script from index to part1
    -- DESCRIPTION --
    on getBehaviorDescription me
      return \
        "GO NEXT BUTTON" & RETURN & RETURN & \
        "Moves the playback head to the next marker when the user clicks on the sprite." & RETURN & RETURN & \
        "PERMITTED MEMBER TYPES:" & RETURN & \
        "Graphic members" & RETURN & RETURN & \
        "PARAMETERS: None"
    end getBehaviorDescription
    on getBehaviorTooltip me
      return \
        "Use with graphic members. " & \
        "Moves the playback head to the next marker on mouseUp."
    end getBehaviorTooltip
    -- HISTORY --
    -- 3 November 1998, written for the D7 Behaviors Palette by James Newton
    --  5 January   2000: updated to D8 <km>
    on mouseUp me
      go frame "test1" of movie "pat1" -- test1 is Maker and the file is part1.dir
    end mouseUp
    on isOKToAttach (me, aSpriteType, aSpriteNum)
      tIsOk = 0
      if aSpriteType = #graphic then
        tIsOK = 1
      end if
      return(tIsOK)
    end on
    script from part1 to index
    -- DESCRIPTION --
    on getBehaviorDescription me
      return \
        "GO PREVIOUS BUTTON" & RETURN & RETURN & \
        "Moves the playback head to the previous marker when the user clicks on the sprite." & RETURN & RETURN & \
        "PERMITTED MEMBER TYPES:" & RETURN & \
        "Graphic members" & RETURN & RETURN & \
        "PARAMETERS: None"
    end getBehaviorDescription
    on getBehaviorTooltip me
      return \
        "Use with graphic members. " & \
        "Moves the playback head to the previous marker on mouseUp."
    end getBehaviorTooltip
    -- HISTORY --
    -- 3 November 1998, written for the D7 Behaviors Palette by James Newton
    --  5 January   2000: updated to D8 <km>
    on mouseUp me
      go frame "Intro" of movie "index" -- Intro is Maker and the file is index.dir
    end mouseUp
    on isOKToAttach (me, aSpriteType, aSpriteNum)
      tIsOk = 0
      if aSpriteType = #graphic then
        tIsOK = 1
      end if
      return(tIsOK)
    end on
    Please help
    Look my page for you to understand my problem www.ionio.gr/~aleksgeor

    It looks like you have taken a behavior from the Library Palette and hard coded it to suit your needs. This was unnecessary. Instead try the following behaviors attached to buttons that take you between movies - assuming they are in the same directory:
    on mouseUp me
      gotoNetMovie("@/part1.dcr#test1")
    end
    on mouseUp me
      gotoNetMovie("@/test.dcr#Intro")
    end
    Also, you should Shockwave-compress your files to DCR (see the Publish Settings) in order to make your movies as small as possible so they download quickly

Maybe you are looking for

  • File has to pass through FTPS connection.. Connection parameters?

    Hi, I want to transfer the file through FTPS connection. Partner side provided the following details as connection parameters. - IP : 129.32.169.140  - POrt: 990 User name Password PASV mode SSL Direct, OpenSSL,SSL Listing, SSL Transfers. Kindly let

  • Building application with wordsub

    I am building an application that uses some of the report generation toolkit. If I build it, it comes up with errors relating the the wordsub.vi. I followed the guidance, which says to add in the Word Dynamic VIs.vi (as well as the Excel Dynamic VIs.

  • Coded UI - Accordion control

    I am trying to click on a section in the accordion control but not able to... I am hand coding. The Accordion properties when I recorded are as below... When recorded it is clicking based on the points,  #region Properties         public HtmlDiv UISu

  • User-exit for default values in service order

    Hi, i use EXIT QQMA0025 (EXIT_SAPLIQS0_017) to set some default values by creating a service notification. Is there some exit or badi to do the same for service orders. I don't want to use TPMUS. Regards, Dieter

  • How to setup Mobile Access Server

    Hi, I am trying to setup Mobile Access Server on my Mac Mini Server. The setup I have is a small network behind a Airport Extreme. I would like to give all users access to services using Mobile Access Server and was hoping initial setup was going to