How to make your facebook status via ipad? (iPad 2)

I used the facebook app and there is no sign of "via" and when im using my browser my status is via mobile.
PLS HLEP ME!!

As far as I know, that is just the way it works. Only on a pc does it show whether it is via mobile. That's just the way the app was made. If you want a more desktop version of Facebook, just go to Facebook.com in safari browser. It might show there. It will show to everyone else that looks at the status update, but not to you, if that is what you're asking.

Similar Messages

Facebook status via ipad

how can i make my facebook status via ipad?

Hi,
You do this the same way as any other iOS device. You can either use the web-browser to access the Facebook site or you could use one of the many dedicated Facebook apps that are available in the App Store.
There are a large number if these, although I think that Friendly is probably the best. It is free and a very good app. As yet Facebook themselves have not done one for the iPad but they are rumoured to be working on one.
I hope that this helps.
Jason

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

How do I play sky go via my iPad on appletv?

How do I play sky go via my iPad on appletv?

The provider has to allow it so it may not be possible to play it on your tv through your apple tv..only watch it on your idevice

How to restore your restriction passcode on an ipad

how to restore your Restriction passcode on an ipad?

To remove the Restrictions passcode you will need to either...
Restore the Device as New...
http://support.apple.com/kb/HT4137
OR...
from a Backup created Before the Restrictions Code was set....
http://support.apple.com/kb/HT1414

Having trouble connecting to FaceBook (fb) via my iPad

hello . . . I am having trouble connecting to FaceBook (fb) via my iPad . . . I seem to connect to other sites easily, but fb is a no-go. My fb account on the computer is working brilliantly.
Error Code: FBAPIErrorDomain
Any suggestions . . . please

Yep. Good point.
To completely shut it down, even in the background, double click the home button to display the row of apps. Then press and hold the Facetime app until the app displays a minus sign. then touch the minus sign.
The app is now stopped !

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hier kun je er meer over lezen; http://www.wikihow.com/Use-the-Cameras-on-Your-iPad-2
En hier kun je meer informatie vinden over de iPad; www.iPadforum.tk

I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?

i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?

You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
Regards.

How to charge your Palm Centro via 64-bit Windows, with a USB cable

Here is a way to recharge your Palm Centro on your 64-bit Windows computer, through a USB cable. But first, a few brief explanatory notes...
Note 1: I have successfully used this method to charge my Palm Centro from my 64-bit Windows 7 computer. This method probably works for other Palm devices and other 64-bit Windows versions (XP and Vist)... but I haven't tested this on any other configurations. Others may feel free to post their successes or failures with their setups.
Note 2: This method will NOT allow you to HotSync your Palm to the computer via USB. All it does is let you charge your Palm via USB. If you need to HotSync your Palm, and you have 64-bit Windows, you have to use Bluetooth or some other method. To learn how to use Bluetooth to sync, search for "bluetooth sync 64-bit" or something like that on this forum.
Note 3: If you're wondering why someone would need to use this method - why not just plug the phone into a wall outlet, right? - it's because the Centro's charging jack can get messed up. Mine has not worked properly for the last several months
Note 4: I will not be posting any follow-ups to this message. This is my first (and only) post here... I'm posting here because I am very grateful to this forum: It is here that I learned how (and why) to sync my Centro to my computer via Bluetooth, because Palm doesn't support 64-bit Windows. This is my way of saying "thank you"! I'm not trying to be harsh by not following up... it's just that I won't be checking this thread, and I don't want anyone to have bad feelings if they ask questions and I don't respond. I'll be as thorough as I can in this one posting, though.
Note 5: I cannot claim credit for actually discovering this solution. I found it after HOURS of looking online... it was on some obscure website. Unfortunately, I can't remember where I found the original solution, so I can't credit the discoverer here. However, I have done my best to provide much more detailed instructions here.
Note 6: Lastly, Palm should support 64-bit Windows. Period. Some of you may say, "It's not Palm's fault - the company that makes the Palm OS is Access, and it's Access's fault for not supporting 64-bit Windows." Well, this may be true, but Access has stated that Palm has not requested a 64-bit driver. (In fact, you can call Access and ask them directly.) And if Palm doesn't ask (and pay) for it, Access sure isn't going to create one on its own. I used to LOVE Palm devices... I've used Palms for 12 years now, and for most of that time, I heartily recommended Palms to all my friends. But, between this problem and the other problems I've had with my current Centro and my previous Treo, I'm done with Palm. No more for me.
OK, here's how to charge your Palm (finally!)
1) If you haven't done so already, install the latest version of Palm Desktop / HotSync on your computer. You can get this at palm.com, under the "support" section. (Actually, I'm not sure if this is necessary, but I already had done this.)
2) As you're installing the software on your computer, toward the end of the process, do not actually sync your Palm to your computer. Just cancel or whatever you have to do to avoid that step. (Remember, the whole point here is that Palm does not have a driver compatible with 64-bit Windows, so you won't be able to sync via USB.)
3) If you don't already have it, get the PocketTunes application (also known as "pTunes") on your Palm device. If you have to install the software, you may need to do so wirelessly or via a 32-bit Windows computer (because, again, Palm doesn't support 64-bit Windows).
4) Connect the Palm USB cable to your computer. If you are using a desktop, plug into the USB ports on the BACK of your computer. These ports are directly powered, whereas the ports on the front of your desktop may not be. You'll want as much juice as possible to charge your Palm.
5) Connect the Palm USB cable to your Palm.
6) Turn on the Palm device, and open the PocketTunes application on your Palm.
7) PocketTunes will try to connect to Windows Media Player (on your desktop). Tell your desktop to connect to Windows Media Player. (You can save time by telling your desktop to do this automatically.) When PocketTunes connects with Windows Media Player, you'll have a power connection via USB.
8) PocketTunes will eventually show that it is "Idle" on the Palm.
9) To confirm whether the Palm is charging, look for the charging light (on the Centro, it's on the upper left) to turn solid red. You can also hit the home button on the Palm to see the battery / charging status. To get the charging working, you may have to exit PocketTunes and come back into it a few times before the charging light comes on. I have no idea why you have to do this; I just know what I wind up doing sometimes. You don't have to unplug and replug the phone from the USB cable, or turn the phone off and on. Just leave PocketTunes and come back to PocketTunes.
10) If you exit the PocketTunes application on the Palm, the Palm will still charge - but you'll get the constant and annoying "no driver" noise from Windows. To avoid that sound, just keep the Palm on PocketTunes while you have the Palm plugged into the USB cable.
11) You can close Windows Media Player on the desktop once you have the Palm charging.
12) Once you have this set up properly, you can speed up the process by setting the HotSync cable button to PocketTunes - after all, that button no longer needs to be set up to HotSync via USB cable.
When you have everything set up, here's what you would be doing on a regular basis:
-- Plug USB cable (which is already plugged into your computer) into Palm
-- Hit HotSync button on cable --> This starts PocketTunes --> PocketTunes automatically opens Windows Media Player on the computer
-- See if charging light turns solid red --> If not, exit PocketTunes, then hit HotSync button on cable to start PocketTunes again
-- Repeat until charging light turns solid red (success!)
-- Once the Palm is charging, close Windows Media Player on desktop
Best of luck to all who need this!
Post relates to: Centro (Verizon)

Why do you want to create your own driver instead of what comes with the device? If you go that route, you need all of the low level USB RAW protocol from the vendor. Did you get that? Yoe are wasting your time if you don't have that. Is the driver from the vendor documented? If it's a USB connection, how does that connection show up in windows device manager?

How to make a full backup of my iPad without using iTunes

I need to make a full backup of my iPad. I am using the Vudu app and have many movies downloaded to my iPad. I have performed a backup of my iPad from iTunes onto my Macbook Pro. The mobile backup files on my laptop are not nearly big enough for the 20+ movies (at lease 1/2 to1 GB each). Because of this I do not believe iTunes has made a full backup including the movies. I want to avoid having to re-download all the movies if/when the iPad drive fails. I want a complete backup such as Time Machine or using some other external hard drive or app on my MacBook Pro.
I bought a Seagate Wireless Plus 1TB Mobile Cloud Storage with Built-in WiFi Streaming (STCK1000100) external hard drive and installed the Seagate Media App. I can, via the app on the iPad, see the device and copy to and from it. But, it only allows access to music, movies in iTunes (not any movies in Vudu), and things like documents on my iPad. It does not allow access to all the files inclding system files stored on the iPad. I also tried another Seagate non wireless external drive that I connected directly to the iPad but the Seagate Media app does not communicate with or recognize the device from the iPad.
I also bought DiskAid software that supposedly will make a complete backup of an App on a mobile device and installed it on my laptop. I was able to make a complete backup of the Vudu app from the iPad onto my laptop, but in a test could not restore it to my iPad. The backup file, though, was the right size, about 26 GB. The DiskAid techs are looking into that. I was able to use DiskAid to backup another app in a test (Hertz). That app made a backup of the Hertz app onto my laptop, I deleted the app on my iPad, then I was able to restore it. But right now the restore option is not working for Vudu.
Another option would be to copy the movie files off of the iPad onto my Laptop, but the iPad does not appear in the finder window on the Laptop.
I have about decided my MacBook Pro laptop will have to be the main repository for all the downloaded movies, since I can make a Time Machine backup of everything.
It is very frustrating to not be able to make a full backup of everything on my iPad.
Anyone else have any ideas? Apple - when are you going to provide a way to make a full backup of an iPad?

I recommend Super Duper as well. I use it batch mode to automatically back up my iMAC every night at 2 am. It's saved my life a couple of times- once my disk crashed (under warranty)and what could have been a disaster (1000's of irreplaceable photos) was a 2 day inconvenience.
Now and then I boot up from my backup on my firewire drive, wipe, check and reformat my internal hard disk, copy back all my files and I'm good to go

How to make your movie from a template in AE CS6?

Hello,
Firstly, I'm new to this forum and Adobe After Effects. Hence, please excuse my beginner's language.
I recently modified a slideshow template in AE CS6. After doing all the necessary modifications in the template project, I do not know how to make a movie out of it.
I'll appreciate your help in guiding me by providing the necessary information to create the movie.
Waiting for a reply.
Thanks

JMichael wrote:
Actually, I have to create the movie urgently and send it to a colleague.
Ouch. That's rather like saying your thesis committee needs your paper tomorrow and, say, while we're at it, can we help you with your research?
After Effects is huge, unbelievably deep and stupidly complicated.
It's not that we don't WANT to help you, it's that we cannot execute the rendering commands for you nor can we make all of the rendering and output decisions for you.

How to make your site DIFFERENT...

Some have auto-playing movies, or songs...
Some have "comment" sections...
Some have no menus...
What have you done to make your site different?
What have you done to make your site eyecatching?
How is this accomplished?
Many of us are finding that we have already pushed iWeb to it's apparent limits, and we need more ideas!
http://www.derekbalsley.com

Thanks all for the kind words.
Linda, as far as the images go I edited them in Photoshop.
I saved them as jpegs using the quality slider set at 8
(never less for quality reasons).
The actual image "dimensions" in general are 280pixels x 421pixels
depending on orientation and 72 ppi in image "resolution" .
I think if you keep images no larger then 450pixels for general viewing
they should load fine.
The images that are the Page Headers are however W700xH400 which is the size of the default place holders in the templates, or 700x120 for the narrow ones.
I hope this isn't getting too technical, I've even considered doing QuickTime tutorials.
Derekbalsey: I'd say use the shapes and do things like adding strokes to a shape and use white or no fill or a complimenting color to fill it.
I will be updating the site tonight, nothing major, just slight changes to the page headers and adding some photos until I get some more "pro" looking ones I hope.
We'll see ho fast those load as they will be larger.
My goal is to use simple shapes and good colors, as i don't really know how to create animations and the likes.
G4 450 dual, PBG4 1.5/ATI 128/1gig ram Mac OS X (10.4.4) http://homepage.mac.com/uhanna

How to unsync your facebook calendar from your iPhone4

How do you unsync your Facebook events and people's birthdays from your iPhone 4 I hate seeing it every morning

I had the same problem. Open your calendar app. Click the button in the top left that says 'calendars.' Scroll down and uncheck the facebook birthdays option. Mine also had an 'Other' birthdays option. I unchecked that too. That did the trick.

How to make the yellow status to green using Process chain in bw 3.5?

Hi all,
How to make a request in the infocube from yellow to green using an process chain in bw 3.5?
Thanks
pooja

Hi.
Use these two Functional Modules one after the other:
First - RSAPO_SWITCH_TRANS_TO_BATCH
Second - RSAPO_SWITCH_BATCH_TO_TRANS
Regards.

How to make your drawings into a movie?

There is this series on youtube called 'Simons Cat' and I know its only his drawings that are made into a movie.
I know how to make a video with pictures just the still pictures, thats not what I want, I want my drawings to move so its like 'Simons Cat'
If you want to know what I mean, look here: http://www.youtube.com/watch?v=JP1Pk62X7XQ&feature=endscreen&NR=1
Mostly preferred to use iMovie!:)
Many Thanks,
Chris

Simon Tofield draws and animates directly in Adobe Flash. It's frame-by-frame animation aka "cell animation"; that is, Simon creates a new drawing for each frame of the movie (though of course many elements are probably copied from the previous frame. If you don't want to use Flash, there are a number of other animation programs available. See:
http://www.macupdate.com/find/mac/animation
Many animators, those who prefer to work in more traditional physical media, just make their drawings and photograph them to stitch into a movie. Up to you what you feel most comfortable working with.
Regards.

How to make your facebook status via ipad? (iPad 2)

Similar Messages

Maybe you are looking for