How to make your i pod stop zooming in

to make your i pod stop zooming in doubble tap the screen when the device is on with three fingers and then pull the fingers down
to zoom out and up to zoom in

A iPod touch only zooms in when you put two fingers on the screen then spread the out and have them in close to zoom out. You can try to avoid putting two fingers on it and nothing really includes two fingers on the iPod touch since it can't handle multi-touch. However, I don't think you can stop that from happening if you keep on doing it by mistake. If there is, them i can imagine that it would be in settings- general then it would be in one of those. I think it would most likely would be in accessibility. Hope this helped! 

Similar Messages

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • How to make the whole movie stop

    Hi,
    I want to make a button open a new scene,
    I have that working but it keeps looping,
    How to make the whole movie stop at the end of scene 2,
    Ive tried putting stop(); but that brings errors,
    I want to stop the whole movie, How would i do this?

    click an empty part of the stage in the frame where you want the timeline to stop and in the actions panel type:
    stop();

  • How to make your iPad and iPhone commicate with each other

    How to make your iPad and iPhone commicate with each other

    this is very easy...
    firstly disconnect the DSL modem for the linksys..
    then connect the computer to the linksys router (port 1/2/3/4)..
    then access the linksys setup UI
    open ur web browser
    site: http://192.198.1.1/
    username: [blank]
    password: admin
    now hook up the westell modem.. and goto the status page ...
    check Internet IP.
    if then Internet IP is 192.168.1.* then,
    disconnect the westell from the router and goto the setup page.
    change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
    save settings....
    connect the westell and viola ur online...
    if the Internet IP is 0.0.0.0 then
    goto the setup page and change the 'Internet connection Type' to 'PPPoE'
    once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
    sud be something like '[email protected]'
    once done save settings...
    goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
    hope this helps...
    cheers..
    Life is short... So get movin !!!
    DopeLorD

  • How to make AI acquire Waveform stop scanning..​.

    Hi... i'm using labview 7.1 and playing a DAQ hardware now...
    i wish to know how to make the "AI Acquire Waveform" stop scanning data into waveform, i heard someone said that got a build in fuction to stop it... can anyone tell me is it true? If no, can let me know the method to stop it?
    with regard
    Jaxx

    If you want to pause your acquisition then the best thing to use would be Pause Triggering (DAQmx) or Scan Clock Gating (Traditional DAQ). You can find examples for either one in the NI Example Finder, search for 'pause' and go to the Cont Acq&Chart Samples-Int Clk-Pause Trigger.vi (DAQmx), or you can search for 'digital scan clock gating' in the search field for ni.com.
    You may also want to look at this site for more information on triggering concepts: http://zone.ni.com/devzone%5Cconceptd.nsf/webmain/​2A03115556FB233386256870005BB522
    In your original comment you stated you simply want a pulse on one line to start, and then to pause the acquisition on the next, then repeat the operation. You may just need to use the Start and Stop Trigger examples reinitialize your task if this is the case where you are just looking at a pulse on one line. Pause triggering or Scan Clock Gating will relate more to you having a single line go high and staying high until you want to pause the acquisition.
    Particularly if you are in the situation where you have pulses coming in on a single line I would recommend you look at the DAQmx examples rather than the Traditional DAQ examples. The architecture of the code is more efficient and will allow you to more quickly reinitialize the task.
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments

  • How to make your movie from a template in AE CS6?

    Hello,
    Firstly, I'm new to this forum and Adobe After Effects. Hence, please excuse my beginner's language.
    I recently modified a slideshow template in AE CS6. After doing all the necessary modifications in the template project, I do not know how to make a movie out of it.
    I'll appreciate your help in guiding me by providing the necessary information to create the movie.
    Waiting for a reply.
    Thanks

    JMichael wrote:
    Actually, I have to create the movie urgently and send it to a colleague.
    Ouch. That's rather like saying your thesis committee needs your paper tomorrow and, say, while we're at it, can we help you with your research?
    After Effects is huge, unbelievably deep and stupidly complicated.
    It's not that we don't WANT to help you, it's that we cannot execute the rendering commands for you nor can we make all of the rendering and output decisions for you.

  • How to make your site DIFFERENT...

    Some have auto-playing movies, or songs...
    Some have "comment" sections...
    Some have no menus...
    What have you done to make your site different?
    What have you done to make your site eyecatching?
    How is this accomplished?
    Many of us are finding that we have already pushed iWeb to it's apparent limits, and we need more ideas!
    http://www.derekbalsley.com

    Thanks all for the kind words.
    Linda, as far as the images go I edited them in Photoshop.
    I saved them as jpegs using the quality slider set at 8
    (never less for quality reasons).
    The actual image "dimensions" in general are 280pixels x 421pixels
    depending on orientation and 72 ppi in image "resolution" .
    I think if you keep images no larger then 450pixels for general viewing
    they should load fine.
    The images that are the Page Headers are however W700xH400 which is the size of the default place holders in the templates, or 700x120 for the narrow ones.
    I hope this isn't getting too technical, I've even considered doing QuickTime tutorials.
    Derekbalsey: I'd say use the shapes and do things like adding strokes to a shape and use white or no fill or a complimenting color to fill it.
    I will be updating the site tonight, nothing major, just slight changes to the page headers and adding some photos until I get some more "pro" looking ones I hope.
    We'll see ho fast those load as they will be larger.
    My goal is to use simple shapes and good colors, as i don't really know how to create animations and the likes.
    G4 450 dual, PBG4 1.5/ATI 128/1gig ram   Mac OS X (10.4.4)   http://homepage.mac.com/uhanna

  • How to make your drawings into a movie?

    There is this series on youtube called 'Simons Cat' and I know its only his drawings that are made into a movie.
    I know how to make a video with pictures just the still pictures, thats not what I want, I want my drawings to move so its like 'Simons Cat'
    If you want to know what I mean, look here: http://www.youtube.com/watch?v=JP1Pk62X7XQ&feature=endscreen&NR=1
    Mostly preferred to use iMovie!:)
    Many Thanks,
    Chris

    Simon Tofield draws and animates directly in Adobe Flash. It's frame-by-frame animation aka "cell animation"; that is, Simon creates a new drawing for each frame of the movie (though of course many elements are probably copied from the previous frame. If you don't want to use Flash, there are a number of other animation programs available. See:
    http://www.macupdate.com/find/mac/animation
    Many animators, those who prefer to work in more traditional physical media, just make their drawings and photograph them to stitch into a movie. Up to you what you feel most comfortable working with.
    Regards.

  • How to make your battery life longer

    You can turn your brightness down to about a little bit above half way.

    You could always check here for tips on how to maximize your battery life.

  • How to make your Bose QC2's fit your iPhone - or maybe any other headphones

    First off, I've read so many threads of people acting really mad that their iphone either doesn't do this or that... People are strange like that. I was even a little upset about the $200 drop, but since it happened I've moved on and I really don't mind.
    Anyways, I'm a very proud owner of an iPhone and a pair of Bose QC2's.. I love both of them. I felt bad that the QC2's didn't fit the iPhone, so I purchased the Belkin adapter. Bad choice. Imagine sitting on an airplane with that 3 inch long adapter sticking out of your iphone like an antenna, then your headphones plugged in. The two guys sitting in the row beside me were laughing - I knew they were. So I trashed the belkin adapter. It ***** anyways. Don't buy it.
    I got home and took a second look at my QC2's and thought, "what if I cut back the plastic/rubber piece so that it WOULD fit?" So I did, and not only did it look good, but it seated perfectly and it sounded GREAT!
    So here's how to do it. All you need is a new strait edge razor... (the kind you would scrape paint off a window)
    Begin cutting in very small increments. Cut strait down by pushing down through the plastic/rubber until it hits the metal. it cuts almost like butter. Go all the way around. I cut off the equivalent thickness of a 5 cent nickel. It will take you less than 5 minutes to make this happen.
    When you're done, you'll find that it fits perfectly, AND that the structural integrity of the male end is not compromised at all.
    I have a photo taken by the iphone. It's a little blurry since I don't know how to get a clear super close up, but the picture shows the results and what it looks like underneath. If anyone can host it for me, that would be great. it that's the case, I'll get out my D100 and get some very good shots of it.
    Good Luck!

    has anyone tried it?

  • How to put your i-pod 2nd gen in passcode mode or how to never go back there!

    I do not like the enter passcode mode!

    Go to Settings>General>Passcode Lock and turn it off. There is no way to prevent someone from turning it back on if the iPod gets out of your possessing.
    For a
    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    
    However, many apps have been updated and the updated apps are no longer compatible with a 2G

  • How to make a button to stop and run a while loop?

    Hi all,
    I am a beginner in the Labview. I did a program that contains a while loop, its stop condition is connected to button. I selected “switch when pressed” to be the operation of this button. Our teacher asked us to make this button stops the loop if it is pressed and its name is converted to run instead of stop. And if it is pressed then again it starts the loop from the point it stopped in.
    Can anybody help me, please?

    First, please use a smaller font when composing your messages.
    You will need two while loops.  An inner loop which has its stop terminal attached to the stop button.  Put that in the False case of a case structure.  Wire a local variable of that stop button to the case selector of the case structure.  Put the case selector inside another while loop which is the one that keeps the program running no matter what the state of the original Stop button.  You will need a master stop button to stop the outer loop when you are ready to end the whole program.  Don't forget to put small millisecond waits in each of the loops so that the loops don't eat up all the CPU resources.
    For that stop button, you could rename the True title to Run, so that when it is pressed to stop the inner loop, the button will show the word Run.  Pressing it again pops it back out, allows the false case to execute and the innermost while loop to run.
    You could also change the words on the buttons by using property nodes.

  • How to make your memory ID as unique as possible...

    Hello Experts,
    I am currently using the EXPORT/IMPORT from memory ID statement in my objects
    and my team lead has said that this is not safe as this might be also be used accidentally
    by other programmers. So he instead urged me to use a unique memory ID. The memory ID I
    am currently using is 3 letters.
    So in these cases, what maybe the best generic combination for memory ID.

    Hi,
            Usually it doesn't happen as the EXPORTed content will put into ABAP memory the source program with call stack remains.
    Any how ID is character type object with maximum length of 60 characters.
            If you make full use of 60 characters, you can generate a unique name always.
    Regards,
    Manne

  • The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

    I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
    The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
    Thanks, Sara

    It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
    Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

  • How to make FaceTime and iMessage stop turning off by themselves

    Has anyone experienced FaceTime and iMessage randomly turning off?

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

Maybe you are looking for