How to manage Nokia Maps from PC?

Hello,
How to manage Nokia Maps (Nokia Drive app) from PC? I know I can download one map at the time from Nokia (mine is Lumia 800), but I want to download 10 different country maps.
What should I do? Is it possible to download all of them at once, through PC?

Justas123 wrote:
What should I do? Is it possible to download all of them at once, through PC?
No other way than to download directly to device unfortunately. At least upon Windows Phone 8 devices with memory card, map data can be stored there now!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

How to use Nokia maps

Hi,
I have Nokia 7510 Supernova Model, I would like to know how to use Nokia maps in it. I tried using Navicore Extenal Bluetooth ( Wayfinder), but i couldnt use it. Is there any way to use maps in Nokia.

Hi mdmalik
Provided this isn't a typographic error for 7610 Supernova, unfortunately you cannot use Nokia Maps on your S40 device. You could use application such as Nav4All although you would need to download data with asscociated costs:http://www.nav4all.com/site2/www.nav4all.com/index.php
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

How to use Nokia map and update software!!!!!!!!!!...

I am using N95-4 8gb, it already built in nokia map with version v1.2. i searched raound on internet, and i found that i am having old version.
I tried to download the new version on the Nokia website, but i couldnt download it. It just appeared the pop up for reading and notthing for downloading.
Another question, When i finish the downloading the map to my phone from the nokia map loader, i disconnect the cable form the phone and i got message say that the date may have been lost. and it required turn Date transfer mode off before disconnect.
Please show me how to turn it off . I do not know how and where to.
I do

Hi knownothing
Last version of Nokia Maps v2.0_4503 here:http://europe.nokia.com/A4984199
Latest version of Nokia Maploader allows you to connect both in default PC Suite mode and Data transfer mode so don't get Windows warning for removing USB mass storage device and more options of Maps, Voices and Store available in Maploader.
If you into Connectivity > USB > USB mode - choice of four connection modes.
Happy to have helped forum in a small way with a Support Ratio = 37.0

E71: how to remove Nokia links from bookmarks?

How do I remove the the Nokia links from bookmarks?
I am unable to delete, or move, them to a folder.

It easy to remove all those Nokia bookmarks links and folders. Just remove the bookmarks db file...
Use Y-Tasks (process & threads) to kill "FavoritesSrv.exe"
You need self sign Y-Tasks.
Then go to... C:\Private\100012a5 and delete...
DBS_101FD685_BrowserBookmarks.db
That's for FP 1 & FP 2 devices for FP 3 devices you need to copy the DBS_101FD685_BrowserBookmarks.db that I included a download link to, copy that to the C:\Private\100012a5, overwriting the original file!
Then restart your device...
After you do that the only folders that you will have by default are...
Web Feeds
Auto.Bookmarks
They are left because they are related to the browsers settings...
FP3 replace db file
http://rapidshare.com/files/183216086/FP3.rar

How to "get" message mapping from XI scenario

Hi guys!
Is there a way, how to export message mapping description in some way from PI? In XI 3.0 it was possible, but what about PI 7.0? Hope you understand me:)
We need it to save this mm description as documentation.
Thanx a lot!
Olian

Hey Oilan,
with the message mapping open, hold ctrl + shift and right-click in the data-flow editor (the part of the screen where the function boxes and links go).
a different menu will pop-up. just follow "export tools, export" or something like that. It is pretty straightforward.
It will save the mapping in a .mte (or something like that) extension file. It is nothing but an XML. Good thing is that you can also import this .mte file in another message mapping (of course, with same source and target messages, or it won't be able to reference the links).
Regards,
Henrique.

How do download Nokia Maps files for Nokia C6-00 o...

Recently I found an update files to my Nokia C6-00 Nokia Maps file,
I stucked at 81MB of 99MB and prompted the download is timeout.
I have fail download for 3 times.
Is there any where I can download the file manually for Malaysia map ?
Thank you.

Assuming that your C6-00 is running Nokia Maps v3.06 here you are Malaysia
Should howver you be running Nokia Maps 3.04 (unlikely) you would need Malaysia
Base map/ClientIndex is not altered frequently so older version usually suffices.
If you need any further help on deploying decompressed .zip of (16) folders 0 - 9 and a - f to E:\cities\diskcache, please post again.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to manage two sites from iWeb

Hi all
I've built two different sites with iWeb, my personal site which goes to my .mac server and publishes there, no problem. I now have built another site for my girlfiends family business, and theirs will go to a differente host and server.
The problem I have is that I have both sites now open, each with their own individual pages, etc (they both appear on the left column as headers), but I can't seem to isolate them for publishing purposes. In other words, I'd like to publish my site to .mac, and my girlfriends site to my hard drive for eventual upload to their server.
When I go to publish, whether I select .mac or my hard drive (publish to another folder) it selects both sites at the same time, I.e. I can't publich them individually.
The problem is that I end up with a copy of my personal webpage files on my hard drive, and a copy of their webpage files on my .mac!
A further problem I see is that this publishing process creates just one index.html file, for both pages. So how can I use this html file to point it to their domain??
Appreciate the help, thanks
J

J:
To add another method to the mix here's how I manage multiple sites. Although they all go to my .Mac account this method can let me post any of them to any other server as I see fit.
One way to handle multiple sites is to use iWebSites. It lets me create multiple sites and multiple domain files. If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites.
This lets me edit several sites and only republish the one I want to where I want.
Do you Twango?
15 MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.9) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

How to disconnect Nokia E71 from the PC?

Hello everybody,
Finally it seems that my E71 works fine, but one last problem remains: when I try to disconnect the USB cable (PC suite mode)from the pc safely, it gives me the error: the device "nokia Et1 USB LCIF" cannot be stopped because a program is still accessing it.
What is the proper way to disconnect the phone?
If I disconnect the phone anyway, can it provoke problems later?
Thanks for your help.
Pippobaudo

hi pippobaud,
i just had exactly the same problem with my e71. when i installed the pc suite and then connected my phone, windows said it didnt install the phone properly. so i opened my hardware device manager and uninstalled E71 under mobile devices i think. then i uninstalled pc suite wich was 6.86 and downloaded the latest version 7.1 and installed that. once i reinstalled pc suite i restarted my computer like it asked and then connected my phone when it asked. it installed it alot better this time and now it works just fine.
before i reinstalled pc suite, when i connected the phone the computer would not distinguish between pc suite mode and mass storage mode. since i reinstalled pc suite it can tell the difference and so i when i am in mass storage mode i just left click the safely remove hardware and stop it. in pc suite mode just shut down pc suite and unplug as it wont harm your memory card.
let me know how you go,
cheers,

How to run a mapping from plsql procedure in some common group?

Hi,
I have a Workflow process, when I running him from OWB I saw in OWB Browser first the name of this process and under this process mappings that in this process.
In one mapping I have some pre-mapping procedure that doing something and prepare some parameters for other mapping and run it (steps for running a mapping I take from sqlplus_exec_template.sql script) and I can't put this mapping into Workflow process for some reasons.
But in OWB browser this mapping doesn't belong to my Workflow process, they located on the one level.
How to modify steps for running mapping so that my mapping is located under this Workflow process in OWB Browser?

Hi,
It sounds like what you are trying to do, is run one mapping in a pre-mapping process of another mapping. You use a wrapper that implements sqlplus_exec_template.sql in PL/SQL. Is that correct?
I don't think that by the way you execute this mapping, it ends up in the context of the process flow. The reason is because according to Warehouse Builder the mapping is being invoked standalone (through the wrapper that implements the template). As a result, the context in which Warehouse Builder would log the messages is lost.
What I suggest you do (assuming I understand the problem correctly), is run the mapping as a separate mapping in the process flow. Because in the current release we do not support passing output parameters in the process flow, you will have to (temporarily) store the results of the first mapping in a table and pick it up from there in the other mapping. In the next major release (autumn 2004) we will support passing parameters between activities.
Thanks,
Mark.

How to prevent java mapping from reloading before each message?

Hi!!!
I've written a simple java mapping (XI 2.0): "Content Enricher" transformation
(source system doesn't send some key information required by target system).
It works fine.
Then I wanted to put some parametrization data into the database.
I added some code to load this data only once into my data structures in the memory.
I also works fine.
But the problem is that SAP XI uses MappingLoader/MappingResolver
to load jar file during transformation of every message.
In a such situation I lose all data and my code has to connect
to the database again (what is not good because of performance).
The question is:
how to configure SAP XI/where to put my code
to achieve a such behaviour: only once my code would load
parametrization from db and then "normal" java mapping could
use it during messages transformation without impact
on the performance?
Regards,
Andrzej Filusz

Hi!!!
Thanks for your answer, but I'm afraid that your solution: singleton pattern doesn't solve my problem.
When XI reload my java mapping classes, all loaded and kept data are lost. Singleton pattern can't prevent it.
I asked SAP about this problem: in XI 3.0 the classes will only be reloaded when a cache refresh has really taken place. But they won't implement this improved behaviour in XI 2.0.
Regards,
Andrzej Filusz

How to manage upgrade project from 4.6c version to 6.0 version

1) The client would like us to do a prototype of the upgrade (from 4.6 C to ECC 6.0) and selectivly modify certain complex customised objects. Is it possible to do it? If yes how?
2) How do we identify which objects have obsolete syntax/function modules, etc that needs to be corrected? Does SAP correct these automatically or do we have to do it manually?
3) How do we identify which all screens which require changing, both SAP and customised screens
4) In version 4.6 C we are using userexits, whereas in ECC 6.0, we understand that user exits are replaced by BADIS. How do we know which all user exits require to be changed and which BADIS we need to implement?
5) After using SPDD and SPAU errors will come how can we resolve it.
Thanks in advance,
shilpa

Hi,
1) The client would like us to do a prototype of the upgrade (from 4.6 C to ECC 6.0) and selectivly modify certain complex customised objects. Is it possible to do it? If yes how?
ans ->Get all the custom objects from ur client..Compare the output in 4.6c and ECC 6.0 and see the if the output is coming correctly.if u won't get the desired result u have to check the functionality and then modify ur programs.
2) How do we identify which objects have obsolete syntax/function modules, etc that needs to be corrected? Does SAP correct these automatically or do we have to do it manually?
3) How do we identify which all screens which require changing, both SAP and customised screens
ans ->Check the screen flow in both versions.
4) In version 4.6 C we are using userexits, whereas in ECC 6.0, we understand that user exits are replaced by BADIS. How do we know which all user exits require to be changed and which BADIS we need to implement?
and ->In ECC 6.0 also u are having userexits ,so u need to check if ur userexit is working well in ECC 6.0 , if not then u have to see for Badi's.
5) After using SPDD and SPAU errors will come how can we resolve it.
ans->if u get erros then u have to manually chnage the code , if u get warnings then SAP will take care...
Regards,
Nagaraj

How to manage my mail from Ipad?

I was able to Sync my Ipad with my mac. I read my mail from my Ipad but the email I delete on my Ipad are still on my mac as unread. Can I sync both devise and manage my mail account from my Ipad? Thank you

Settings>Messages>Send & Receive at>You can be reached by iMessages at
Uncheck/deselect your phone number in that setting.

How to manage one domain from another domain

I have created 2 domains domain1 and domain2. I deployed a web application in domain2 and created a managed server "newManagedserver-1" to run the application. From admin console of domain1, I need to control ie start/stop managed server "newManagedserver-1" created in domain2 by using the Node manager.
Please let me know if its possible and if so, please let me know the steps.

855557 wrote:
Ok thanks for information. I have following questions:
1)Is it possible for same domain to exist on more than 1 physical machine. I mean lets consider I create a domain domain1 in physical machine1 and same domain1 in physical machine2. Can I monitor managed servers of physical machine2 from admin console of physical machine1. Paths of the domain1 on both the physical machines being same(C:\bea\user_projects\domains)
2)If the paths of domain1 on both physical machines is different(for eg C:\CLOSR\install1\appserver\autodeploy\domain1 and C:\CLOSR\install2\appserver\autodeploy\domain1), then will the node manager functionality with admin server of machine1 and managed servers on machine2 work?---We can create one domain (domain1) and have different managed servers on two different physical machines.
Which means create a domain on machine1,and while adding a managed servers to that domain,
1)create 1 managed server (MS1) and provide the IP address of the same box(machine1)
2)create second managed server (MS2) and provide the IP address of the second box(machine2)
In this way we can create two managed servers on two different machines (machine1 and machine2), and as per your requirement monitor/manage the managed servers from machine1.
We don’t need to create a domain on another machine explicitly,however this configuration need few steps to be performed.
This concept is called Horizontal cluster,Following forum link will explain the same in detail.
Vertical and Horizontal Clustering
---Regarding having different paths for the same domain on machine1 and machine2,
We will not create a domain on machine 2 explicitly; the concept is creating one domain but distributing it on different machines.
So paths of the installation or the directory where we have the managed sever will not matter here.
The node manager functionality will work, provided we configure it correctly.
Following link will help you understand this in a better way.
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/server_start/nodemgr.html
If you need the guidelines in node manager configuration (bit tricky) please let me know.
Edited by: user123456 on May 2, 2011 9:32 PM

How to stop Nokia Suite from starting at computer ...

It is very annoying when the program starts up on top of my other applications, and it slows startup down as well.
I've checked the startup folder (in a few different places actually) and msconfig, but there is no entry for nokia suite. I've also unchecked the box from nokia suite.
I'm using Nokia Suite 3.2.100 on Windows 7.

Something Odd...I do not get the entry under msconfig but surely it is in Ccleaner (Refer attachment)
Try this... First enable START thru' Nokia Suite -->Tools-->Options...and reboot the PC.. Then check if its there in Ccleaner...If you get it.. Disable from there.
Attachments:
Ccleaner.png ‏216 KB

How to manage Nokia Maps from PC?

Similar Messages

Maybe you are looking for