How To Manage Premiere Cache Files On A Central Storage Server with Multiple editors

Look for the proper recommended setup in a shared storage environment with multiple editors. Where do cache files reside on each editor locally or on the shared storage.
This is in a Windows 7 Environment using EMC2 Isilon for our shared storage. We are running Premier Pro CC 2014 8.1 Caravan Build 8.2.0(65)
Thanks
Rodney

Look for the proper recommended setup in a shared storage environment with multiple editors. Where do cache files reside on each editor locally or on the shared storage.
This is in a Windows 7 Environment using EMC2 Isilon for our shared storage. We are running Premier Pro CC 2014 8.1 Caravan Build 8.2.0(65)
Thanks
Rodney

Similar Messages

  • How to manage media cache files in Premiere Pro CS5.5?

    I hope my question is not too complicated but I still haven't figured this one out.
    Here goes:
    Whenever I open a project in Premiere Pro, the media cache files used are always the same ones from a prior project.
    For example, if I open project ABC, the scratch disk used, the media cache and media cache files are from the ABC project file.
    Then, if I open another document, XYZ, the scratch disk and the media cache files are again stored in the ABC project file.
    HOW DO I CHANGE THE SETTINGS SO THE SCRATCH DISK AND MEDIA CACHE ARE THE ONES SPECIFIC TO THE PARTICULAR PROJECT I OPEN?
    So I don't have to move all the cache files manually or change the settings in Premiere every time I open a project.
    Sorry for the long description. Thanks for your help. Daniel Martel. Quebec. Canada.

    You can't (unless you want to store them next to the originals, a proposition I find untenable).  Some of the scratch disk settings are stored at the project level (things like video and audio previews), but the one's you're talking about are global - one setting for the whole program.
    I don't like that arrangement myself.  ALL scratch disks should be stored per project.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How to clear the cache files in folder Temporary Internet Files

    When one user opens files such as pdf. or doc. from Portal,  the same file will be downloaded into the Temporary Internet Files folder. if another user copied the files out of the Temporary Internet Files folder from this computer and save to someplace else, then we face one security problem.
    So my question is: How to clear the cache files in folder Temporary Internet Files??  Can we delete the files automatically when close the files in Portal??
    or is there some ways to make encrypty???
    Thanks very much!

    Hello,
    this is a basical security problem which should be resolved by the OS standard security setup . No other user should have access to the temporary file folders in the personal directory. The user account must be secure. Normaly your security problem should not be a problem if basic security exists on the clients.
    You can resolve this problem if every user has his own account on the client
    The users having no administration permissions on the clients
    The folder for the temporary internet files is placed in the personal profile folder of the user account.
    On default no other user has access rights to you personal folder, this means the client OS is setup correctly.
    You can setup the IE that no temporary files are saved (but it reduces performance)
    You can enable IE to delete automaticly the temporary files if IE is closed.
    Hope it helps.
    Regards
    Alex

  • How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

    How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
    Thanks in Advance
    NTRao

    Hi,
    There are numerous ways to change the cache size.
    You could deploy a vbscript to a collection of the devices.
    On Error Resume Next
    Dim UIResManager
    Dim Cache
    Dim CacheSize
    CacheSize=20000
    Set UIResManager = createobject("UIResource.UIResourceMgr")
    Set Cache=UIResManager.GetCacheInfo()
    Cache.TotalSize=CacheSize
    Or you could use a configuration item.
    http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
    You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
    http://www.nowmicro.com/recast/right-click-tools/
    http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
    select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
    https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

  • How to print a pdf file of compounds A3 and A4 with adobe mac

    how to print a pdf file of compounds A3 and A4 with adobe mac, windows with the option I choose paper source by PDF page size mac but I can not find it. how to get it thank you

    I think if you use the start-command, the execution is asynchronously and you won't get the correct process-id. Try to execute Acorbat directly without the cmd /c start in front of it.

  • How can we access the file/directory system in the server

    Hi friends,
    I have made a text editor attached with an audio player for my project.
    Both text editor and audio player are implemented in applet and put in to a
    jsp page using jsp:plugin. Text editor and player are separate applets running
    in the same page and from same server.A client who is using this editor may
    want to save the edited text files to the server as well as hear audio files from
    directories in the server.
    My question is how can we access the file/directory system in the server
    like we do in the local machine.When the user cliks save or openfromserver button
    in the editor, folder/files in the server must be displayed as we do with FileChooser.
    I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
    manu

    You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

  • How to deploy a WAR file to Sun One Portal Server

    Would someone please tell me the instruction of how to deploy a WAR file to Sun One Portal Server 6.2. Thank you.

    I would advise against this. We tried that and it totally hosed the server.xml file and took our staging portal server down.
    I have no idea what was "in" the server.xml or other files, but trying to deploy a .war file using the WS admin interface hosed portal server's settings.

  • Issue listeneing queue from Weblogic Cluster server with multiple managed server

    Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
    Weblogic Cluster structure is like
    Weblogic Cluster01
      --ManagedServer01(http://server01.myhost.com:7001)
      --ManagedServer02(http://server02.myhost.com:7001)
    JMS Servers
      JMSserver01 targeting: ManagedServer01
      JMSserver02 targeting: ManagedServer02
      JMSmodule
      ConnectionFactory01 targeting:JMSserver01,JMSserver02
      UDQueue01 targeting:JMSserver01,JMSserver02
    Uniform Distributed Queue in Monitoring tab showing like this
      mysystemmodule!JMSserver01@UDQueue01
      mysystemmodule!JMSserver02@UDQueue01
    So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
      mysystemmodule!JMSserver01@UDQueue01 10
      mysystemmodule!JMSserver02@UDQueue01 10
    But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
      mysystemmodule!JMSserver01@UDQueue01 0
      mysystemmodule!JMSserver02@UDQueue01 10
    untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
    Solutions that tried
      1) we have tried give both server URL coma sparated in provider URL
    we need to configur same scenario for 5 managed server with 3 listener on other servers.
    Do any one have solution for this.

    You need to have:
    1. Consumers connected to each UDQ member
    OR
    2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
    http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
    For example you can set it to 10 (10s)
    Additional Information here:
    http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
    http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
    How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
    I hope this helps
    Best Regards
    Luz

  • How to control one server with multiple clients via TCP/IP

    I am wanting to control a single server with multiple clients.  Only one client would be active at a time, so there would be no conflict.  I want to use TCP/IP.  So far, I have programmed a cluster that passes data back to the server with no problems.  The challenge come in when a second client is added to the mix.  I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server. 
    Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
    1.  Send a numeric on the front of the cluster packet that tells the server that data is on the way.
    2.  Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
    The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off.  If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
    Any help?

    You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
    You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
    After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
    The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
    Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
    This will definitely work for you, but it will take some work. Best of luck!
    Jarrod S.
    National Instruments

  • How can i get a link to download windows storage server 2008 standard

    how can i get a link to download windows storage server 2008 standard

    Hi,
    Please find the below link for storage server and its resources.
    Windows storage server
    Regards, Ravikumar P

  • How do i test split by value functionality in mesage mapping with multiple

    how do i test split by value functionality in mesage mapping with multiple values ?
    regards,
    venkat

    repeat your source node. in mapping editor you can view queues by right clicking to mapped element.. selecting Display Queues option.. this will show u your values .
    You can also select this Display Queue option for splitByValue option
    for example
    source--->splitByValue>target
    Try viewing your queues to each this step... for splitByValue in display Queue you will see context inserted(grey colour) accodingly

  • How does create a server with multiple Clients ?

    Any people can lead me .
    How does create a server with multiple Clients ?
    Thanks

    For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
    I posted a Simple Socket Server that uses 1+2*clients threads.

  • How delete temp and cache files from MBA HD?

    please let me know how to delete temp, logs and cache files...

    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212

  • How to manage high score file

    Hello,
    I have made i little game in CVI, in the end of the game user get a score base on the levels he passed and the level of difficulty.
    As this is a school assignment i have to have a score board. I've made score board using a table and i read arguments from a txt file.
    All I read is the name of the player and his score.
    The trouble that I'm having is to check the txt file and see if the new score of the user can be put in the score board.
    I need to known how I check if user's new score need to be put into the score txt file, and how to put it there.
    Thanks in advacne!

    Hello Slavik87!
    If I understand your question correctly, want to are asking is how to read the text file, retrieve the highest scores from it and update the file again.
    If you are asking about which functions to use, these are some functions you can use to perform the file operations:
    fopen, to open the file
    fputs, to write a string to the file
    fgets, to get a string from the file
    fseek, to navigate through the file
    fclose, to close the file
    Here are some suggestions about how you can manage the information in your text file:
    Insert each new entry (name, score) on a separate new row, optionally using separators:
    John Doe, 10
    Kelly Smith, 43
    Kevin Brown, 4
    After reading these lines from disk, you would have to store the entries in some data structures (e.g. lists, structures) for your application to manage.
    For optimization, you can also sort the rows based on the highest score, this way, when you want to retrieve the highest scores, these are already situated at the beginning of the file. However, when you update the rows, you would have to switch places of rows, when a person will have a higher score than the previous item(s).
    Best regards!
    - Johannes

  • How to maintain the Cache Files

    Hello Folks,
    Is there anyway to minimize Cache files..?
    Our Web reports(9i) output into PDF and has Parameter form. For each time we run the report, one html file(Parameter form) and PDF file(report output) was caching in the Cache directory. For same report, it generates different html file and pdf file every time.
    I have tried the DesName, but no luck..
    Thanks,
    Senthil

    Hello,
    A File (or several if needed) is/are always generated in the cache whatever the destination type is (DESTYPE=FILE / PRINTER / ...)
    in http://download-uk.oracle.com/docs/html/B14048_02/pbr_arch.htm#i1005582
    - The Reports Engine populates the Reports Server cache.
    - The Reports Engine notifies the Reports Server that the report is ready.
    - The Reports Server accesses the cache and sends the report to output according to the runtime parameters specified in either the URL, the command line, or the keyword section in the cgicmd.dat file (URL requests only).
    You can use the parameter EXPIRATION if you want to "expire" some output files in the cache. After the duration specified in EXPIRATION, the files in the cache will be deleted.
    http://download-uk.oracle.com/docs/html/B14048_02/pbr_cla.htm#sthref2795
    Regards

Maybe you are looking for