How to manage profiles in airport utility 6.3.1

Anyone had any luck managing profiles, checking logs, signal strength, or any other function that ( apparently ) has disappeared on the 6 series Utility?

Thanks for the reply!
If Apple can't/won't add back that functionality, it will be very hard on anyone whose needs are not simply on/off, default configuration... I'm currently using v5.6.1, but how long will that work as time & firmware move forward?
I believe I am sad.

Similar Messages

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • How to downgrade firmware using Airport Utility 6.0?

    Found descriptions for how to do it using older versions of the Airport Utility.
    In the current version 6.0 of Airport Utility running in Lion, all the manual setup options appear to be gone. No option for downgrading firmware I can find either.
    Having the dreaded "disk spins up every few seconds" issue with the TC 7.6.1 firmware. Want to try downgrading to 7.5.2 - am told that will fix the problem before the disk destroys itself.

    Hold down the option key.. when you select the different firmware.. it will then offer all that are available..
    The very latest TC will not allow you to downgrade beyond 7.6.0 for some reason.. although the first of the Gen4 were sold with 7.5.2 if it didn't come with that level firmware it might not be able to go back to it.
    Have you totally isolated the TC from the network.. reset it.. does the disk still spin up and down.. if so return for warranty exchange.. it is faulty. Otherwise start plugging in computers.. or connecting by wireless. give it a new wireless name.. add devices one by one until you find which is causing constant disk access. You might need to then do a reinstall to rid that device of the issue that is affecting the TC.

  • How to downgrade firmware without Airport Utility?

    Since updating my Express firmware to 7.5.x I have not been able to connect to the internet.
    After factory resets I am not even able to connect to the Express through Airport Utility even though it see's the router.
    After six hours of trying and reading various post on the latest firmware it appears that it must be this latest firmware that is the problem.
    I want to go back to 7.4 or 7.3 firmware on my Express but how can I do this without using Airport Utility?

    I want to go back to 7.4 or 7.3 firmware on my Express but how can I do this without using Airport Utility?
    You can't. Try a factory default reset on the AX again as follows:
    Power it off for 30 minutes
    Hold in the reset button and while you continue to hold it in, plug the AX back in to power
    Keep holding the reset button until you see the amber light begin to blink more quickly and hold another 3-4 seconds when you see this and then release
    Allow 40-45 seconds for the AX to restart until the amber light is blinking slowly. Then, temporarily connect an ethernet cable to the AX from your computer. Restart your computer and Open AirPort Utility - Manual Setup
    Click directly on the word "Version" (3rd line) and you will be able to choose the firmware version you want.
    There's no guarantee this will work, of course, if there is some other internal issue on the AX.

  • HT1281 How to do this with Airport Utility V.6.0 ?

    This functionality vanished with v.6.0 - ?

    Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion to get the functionality that you need. Keep both 5.6 and 6.0 on your Mac and use the one that you want.
    AirPort Utility was available on the same day....January 30....as AirPort Utility 6.0, but apparently a number of users missed this.

  • How do I upgrade to Airport Utility to v7.5.2

    I've repeatedly get:
    kernel: com.apple.message.domain: com.apple.kernel.external_modification
    com.apple.message.signature: rooksd(0E94D50D-EA99-14C7-0A47-C66D69F6F22B)
    com.apple.message.signature2: WebProcess(70906893-775B-3246-92A6-9E900347BF6E)
    com.apple.message.result: noop
    I don't know for a fact what it means or what it's for but, after some research, the general consensus has made it quite clear that I need to upgrade Airport Utility to v7.5.2.
    The problem is that I can't seem to find it.  This upgrade, apparently, was available well before Lion came out.
    Currently, I has v6.0. 
    If there is a known issue with Airport that promted newer versions to be released, then why can I not update to the latest version available?
    A direct reply would be nice.  Simply send me a message though Apple Support, if possible, or [email protected], or simply reply on this forum and , I hope, I should get a notification.
    I thank you for your (who ever's) time and kindness.
    MRL

    ClamXav-scan.log:
    WARNING: Can't open file /Library/Application Support/iPhoto/Themes/Shared/Backgrounds/Textures/tile_debossed_sand.jpg: Unknown error: -22
    /Users/~me~/Books & Manuals/Computer Skills/Web related/Gray.Hat.Hacking.The.Ethical.Hackers.Handbook.3rd.Edition.pdf: Exploit.HTML.MHTRedir-8 FOUND
    There are so many log files.. I could not find where it actually belonged but thru the "All Mesages" option in the left pane, I found this line:
    12-05-14 4:12:32.036 PM Firewall: Stealth Mode connection attempt to UDP 192.168.0.2:60559 from 64.178.142.10:53
    I hope this helps. (?!)

  • Airport Express Router-How to secure it without airport utility

    Need help securing my airport express wireless router. I don't have the airport utility. Is there a way to secure the router without it?

    Sorry, but no. You will not be able to configure the AirPort without the AirPort Utility. Unlike other routers, the AirPorts do NOT have a web-based administration interface.
    You can download a copy of the AirPort Utility directly from Apple Support here.

  • How do I configure my airport utility for port mapping?

    I am trying to view my FOSCAM cameras over the internet while away from home. They work fine in my house using Wi-Fi. Instructions say to do port forwarding. I have cameras set up, but can't get my router to port forward. I found "Port Forwarding" in Airport Utlility then NETWORK. 'Router mode: DHCP and NAT';on 'Port Settings I click on the "+" at the bottom. 'Private IP Address: populates to 10.0.1.201'. What goes in the other blocks?

    Please check out the following AirPort User Tip for details on how to configure Port Mapping on the AirPort routers. I would suggest that you check your FOSCAM documentation as to what TCP and/or UDP ports are required to access their IP cameras from a remote location.

  • Switching profiles in Airport Express

    I have an old airport express (1st gen) that allows me to use multiple profiles (I use it at home to extend my wireless network and have a travel profile to create a wifi network). Do I need to use my computer to change the profile before unplugging the airport express at home and taking it with me wherever I am going, or will it switch automatically when I connect it to an ethernet cable, and back to extend my netword when I plug it back at home? This is not so easy now because I can only manage profiles with Airport Utility 5.6, which I only downloaded at my desktop but do not have in my notebook, ipad or iphone.Thanks

    Ricardo231 wrote:
    ... Do I need to use my computer to change the profile before unplugging the airport express at home and taking it with me wherever I am going,
    Yes. The Express will not automatically change from one stored profile to another, so you must switch profiles yourself.
    This is not so easy now because I can only manage profiles with Airport Utility 5.6,
    That is a moot point since a first generation Express requires AU 5.6 anyway.

  • How do I tell what version airport express I have?  Airport Utility says this version does not support this base station.  What to do, how to update?

    I tried to add an older airport express to my network that I had not been using.  It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station.   I am running airport utility V6.3.4 on a mac mini running OS X 10.10.  Not sure which airport express it is, nor how to check.  I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility.  I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10   Any ideas other than throwing a perfectly good airport express away?

    Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
    You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
    The new utility doesn't support  the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
    AEs.
    Try and get a version 5.6.1.

  • Airport base station Manage Profiles dimmed

    I cannot do this (Manage Profiles dimmed):
    "AirPort Extreme and AirPort Express Base Stations can store up to five configurations, known as profiles. A profile contains base station settings, such as names and passwords, and network configuration information, such as the way the base station connects to the Internet."
    http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html1http://d ocs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html
    iMac Intel Core 2 Duo 2.16 GHz
    AirPort Utility 5.2.1.app
    AirPort Firmware 5.7
    Airport Extreme Base Station w/ Modem & Antenna
    Port M8799LL/A
    System Version: Mac OS X 10.4.10 (8R2218)
    Kernel Version: Darwin 8.10.1

    I am sorry to say that your last post answered your question and your problem.
    Symantec...... If you have anything Norton on your Mac, chances are better than not there is your problem.
    1st The Firewall that comes native to Mac OSX and the Unix Operating System is one of the best.
    Norton Products have shown to be very disruptive to Mac Systems, Period.
    When you mention you disable Norton Firewall and all is well then it just bears out that Norton is your problem.
    I think your problem will go away when everything Norton is gone.
    Here is the link to UnInstall.
    http://www.symantec.com/techsupp/files/navm/navmac_9files.html
    Good Luck, This should solve your problems. Don

  • How to Install Airport Utility in a differant language to windows

    Hi,
    I have a German Windows XP PC. How do I get the Airport Utility (For the new AirPort Extreme 802.11n) to install in a different language (English)?
    Thanks for your help,
    Adam

    The application is always going to install in whatever language you have the PC set to. The only way I can think to change this is to change your installation from German to English.

  • I have an old Airport Express. How do I get Airport Utility to recognise it?

    I have an OLd style Airport Express that I was using with my 2007 iMac and Tiger. Recent upgrade to Mountain Lion.
    How do I get the Airport Utility to recognise it so I can set extra stuff?
    AndrewH66

    Here are the AirPort Utility downloads:
    http://support.apple.com/downloads/#airport
    Bottom line: I don't believe it's possible to use your old AirPort Express with Mountain Lion.  The current AirPort Utility is 6.3.1.
    I'm assuming you have this one (from around 2004):
    http://support.apple.com/kb/SP76
    If instead you have this one (from arount 2008):
    http://support.apple.com/kb/SP1
    ... then AirPort Utility may well support your device.

  • How do I get airport utility program

    my time capsule light is flashing amber. How do I check for airport utility program?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the flashing amber dot to find out why the Time Capsule is complaining.

  • How do you archive a disk with AirPort Utility version 6?

    Has anyone figured how to Archive Disks with AirPort utility version 6?  I can see both drives but it refuses to do an Archive in version 6?  (I don't even see a button to do so in the UI?)

    Please download and install AirPort Utility 5.6 for Mac OS X Lion
    Keep both 6.0 and 5.6 on your Mac (6.0 cannot be deleted).

Maybe you are looking for

  • How can I use a report as a filter that accepts a prompt value in R18?

    In R17 the following setup worked properly. 1) have a main report that uses another report as a filter report. 2) In the filter report, add a criteria statement which is prompted. 3) pass an argument from a web link or embedded web applet on the repo

  • How to set a default value in a Value Help Drop Down List

    Hi, I used an age Range field in my adobe form, the control  is a Value Help Drop Down List. i am populating the drop down using following code. IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");      IS

  • IPAD 3 battery charging issues

    iPAD 3 battery charging issues. Read most of the discussions. My question is: If I take my iPAD to Apple Genius bar - what's the test they do to qualify for a replacement (do they place it on a charge and see the charge for Y% for X minutes or do the

  • How to enter BIOS edge e530

    Hello, how can I enter the bios in a recently purchased Edge e530 ?? Thanks a lot Solved! Go to Solution.

  • Adobe Acrobate 7.0 Standard Failed activation !!

    Hello Support Team, Please we have a license for acrobat reader 7 standard, but we got activation required message and after 2 Min program exit. Please find attached all Pic. describing the error messages. If you have any questions please let us now.