How to manage pulp and paper processing through SAP

Hi...
please let me know how to manage pulp and paper processing through SAP-PP in details......
or please provide sum links where i can get the solution....
regards,
sandeep.

Hi Ema,
you need to ensure in your BAdi implementation that the records do not overlap. Ideally (for performance reasons) you also keep the number of records in RPM_BUPA_AVL low
i.e. one record for 01.Jan to 05 Jan with 8 hours is better compared to 5 records with 8 hours each.
Best regards
Thorsten

Similar Messages

Getting Updated image through Config manager Build and capture process

Hi guys,
Looking for some pointers on getting the almost fully patched image out of configuration manager build and capture process.
I need below pointers:
- What and where to advertise\deploy software packages target? since its a new deployment, I believe it should be targeted to all unknown computers.
- How many times should I call 'install update' step in TS and where?
- What is the best way to patch image (if something is missed out during image capture) offline (since its config manager 2012 R2). when I pull schedule update list for offline schedule, does that only pull updates that are required for that image or it
pulls everything available as updates?
- I have done offline patch of image but still once the image is deployed it pulls office updates. Looks like , offline service just injects OS patches..right?
Regards,
Regards,

- Where? That depends upon what you what. But, going by the letter of what you asked, you shouldn't deploy any applications or packages if you want them on your newly images systems, you should make them a part of the TS using Install Software and Install
Application tasks.
- How many times? You should only need one although depending upon what you are deploying and if you are using offline updates, some folks add more. I typically use two one right after the Setup Windows and ConfigMgr task (just like the task sequence wizard
builds for you) to update the OS and "things" in the image and one at the end to catch additional updates for apps and components added during the TS. Note that you also have to initiate an update scan cycle for additional install update tasks to work. Do
this by adding a run-command line task before the second Install Updates task with the proper WMIC incantation.
- Offline Updates only injects CBS updates into the image which are typically just core OS updates. You should also update your image though to include non-CBS updates. Using a build and catpure task sequence makes this easy.
Jason | http://blog.configmgrftw.com

How to create parent and chile process in java

i'm beginning in java, and i want to ask something, please help me...
1. i want to ask how to create parent and child process in java???
example :
if have one window and explore menu, when i click the explore menu.
new window come out.
how if i close the parent window the child window will close too...
2. what is the method from runtime class to get available memory and Active Threads count

ONE way to do what you wanted is this.
class Parent{
Child c = new Child
allChildren.add(c);
//if close
iterate through list
(Child)allChildren.get(index).close();
ArrayList allChildren;
class Child{
public void close(){ }
i dont know if you can get the thread count. but you can
get the current thread by using System.
Memory: Runtime.freeMemory() .maxMemory() .totalMemory()
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Runtime.html
Careful though you have to do a calculation to get the
actual memory because those 3 methods refer to freeMemory
of the CURRENT heap not the total memory.
i think its: total - (max - free)

How to manage slow and fast moving goods in Demand Planning

Hi All,
Kindly let me know how to manage slow and fast moving goods in Demand Planning.
1. First how to detect slow and fast moving goods
2. which DP model to use
3. Any Best practice while dealing with slow and fast moving goods
Thanks
Arun

Arun,
There are two main concerns with forecasting slow moving goods. For fast moving, yes, trend, level and seasonality combined with a decent demand level gets you through.
So, either you don't have demand in the market for that product; if the product is not critical (like go/no go spare parts) I recommend just averaging out the demand over a period and going with that. Any errors incurred there won't have a significant business impact. On the other hand if it is critical, safety stock and/or contractual obligations come to play.
OR, if there is market demand but your market share is too low for whatever reason, then it gets tricky because you need a predictor variable(s) for which you have good knowledge off (such as CPI index, demand for related products, etc). The forecast is then done on the predictor variable(s) and the low market share applied to 'translate' the expected demand to the product in question. Unfortunately, the case of low demand/low market share I have no idea of how to implement it on SAP. Since forecasting is just the tip of the iceberg, it may pay to do it outside of SAP (say in Excel) and manually input it (unless the products are many and varied).
Hope this helps. Please let me know if this makes sense and/or applies to your question.
Rodrigo

Fund management configuration and business process document

hi,
Can anyone provide me fund management configuration and business process document
Mahendra M

Hi,
maybe this document will help you more:
http://perlhosting.net/download/968192356.html
SAP78V

How to run mrp and capacity leveling through heuritics.

Hi,
How to run mrp and capacity leveling through heuritics.
What are the setps required for production planning run this thing in the heuritics in pp/ds?
Regards,
Sunil

Sunil,
APO PP/DS doesn't have a 1-to-1 match for MRP/Cap levelling per se. There are, though, a limitless number of ways to achieve the results you want.
Start with a basic PP planning MRP - SAP_PP_002, which will should create all necessary planned orders
Then try a DS heuristic to schedule your orders according to capacity. Schedule Sequence SAP001 is a good starting point. This can be used to schedule your cap relevant work centers such that they fully load the capacity available, similar to cap levelling.
Rgds,
DB49

How can i send and recieve mail through java

HI All,
plz let me know how can i send and receive mail through java.
Regards:
sachin kakkar
http://www.datamansoftwares.com

Using java mail API..
try to search the forum for java mail... you find many question and answer.
use the left search textfield

Want Accounting Entries for Sales Cycle and Procurement Process in SAP

Hello Gurus,
Can some one kindly send me the accounting entries happens during Sales Cycle and Procurement Process in SAP.I will be very helpful if i get this by Friday ( tomarrow).Its a request.
Thanks,
B
Moderator: Read and respect the rules of the forum

You can visit the following link.
http://www.sap-img.com/financial/inventory-accounting-entries.htm
Also, before posting here, you should do a search in here or in Google. You would get most of your answers by searching in Google or any search engine.
One more thing. Timelines are not permitted in these forums.
Cheers,
Ravi.

Crawler and Crawler processes in SAP Portals

Hi:
I want to know what is the crawler and crawler processes in SAP Portals ?
Witch funtions do they have ?
Thanks in advance,
Felipe Mendivil Ortiz

I believe you should have addressed this question to another forum as the current one is reserved for Manufacturing Execution Solution, Here you can find a list of other forums: list.

How can i view the Streams process through 10g OEM

I have successfully configured OEM on Oracle 10.1.0.3
My question is:
How can i view the Streams processes and queues so that i could monitor its functionality.
In 9i Java Console OEM I was able to monitor Streams using the <Distributed> tab but I don't find any such option in 10g. Please help.
Thanks in Advance.
Regards,
Raj

There's a message on the Database Administration page of EM10g.
"TIP Use the Enterprise Manager 10g Java Console to manage Streams, Advanced Replication, Advanced Queues, XML Database, Spatial and Workspace."
At present there is no way through the EM10g Web Interface, and I understand the Java version which comes with 10g doesn't contain any 10g new features.
So I am still using OEM 9.2 in addition to EM10g
Thanks,
Alan...

How to make detection and acquasition processes faster on 6602 board ?

Hi to everybody,
Currently I am using a NI 6602 board. And I am designing my project using VC++ in .NET framework(1.1) .
In my application, I have to wait a digital signal(triggering signal) to go high level to start my acquasition.
At first, I tried to check continuously that incoming digital signal in a seperate thread using ReadSingleSampleSingleLine() fxn (polling). In my application there aren't so much threads , just 3-4 threads, and this thread has the highest priority.
But I recognised that I am missing some acquasition data after I detect the trigger signal.
In more detail the case is: when the trigger signal arrives, I have to capture an incoming byte(which is available on another 8 digital input lines for just 5-6 microseconds).
And the problem is : I can detect the trigger signal by polling but I am missing the incoming byte. I am trying to detect the incoming byte using ReadSingleSamplePortByte() function again by polling. The incoming byte disappears before I manage to read it.
My fist question:
1. Is there anything that you can suggest to make my detection and acquasition process faster?
I tried to use digital edge triggering and change detection events hoping to faster my process. But I got an exception about my board does not support that kind of triggering.
My second question:
2. Is there any way to use digital edge triggering or change detection events in 6602 board?
This is the first time I am using an NI board.
I noticed that 6602 is specialized on timer counter concepts, not on digital I/O concepts. But I don't have a chance to use any other board right now and I have to manage my application using 6602.
any help is welcomed.
thanks in advance.
koray.

In a more readable form:
Hi to everybody,
Currently I am using a NI 6602 board. And I am designing my project using VC++ in .NET framework(1.1) .
In my application, I have to wait a digital signal(triggering signal) to go high level to start my acquasition.
At first, I tried to check continuously that incoming digital signal in a seperate thread using ReadSingleSampleSingleLine() fxn (polling). In my application there aren't so much threads , just 3-4 threads, and this thread has the highest priority. But I recognised that I am missing some acquasition data after I detect the trigger signal.
In more detail the case is: when the trigger signal arrives, I have to capture an incoming byte(which is available on another 8 digital input lines for just 5-6 microseconds).
And the problem is : I can detect the trigger signal by polling but I am missing the incoming byte. I am trying to detect the incoming byte using ReadSingleSamplePortByte() function again by polling. The incoming byte disappears before I manage to read it.
My fist question:
1. Is there anything that you can suggest to make my detection and acquasition process faster?
I tried to use digital edge triggering and change detection events hoping to faster my process. But I got an exception about my board does not support that kind of triggering.
My second question:
2. Is there any way to use digital edge triggering or change detection events in 6602 board?
This is the first time I am using an NI board. I noticed that 6602 is specialized on timer counter concepts, not on digital I/O concepts. But I don't have a chance to use any other board right now and I have to manage my application using 6602.
any help is welcomed.
thanks in advance.
koray.

How to manage Rescue and Recovery Backups

Hi I've been using disk image backup solutions since the days of powerquests Drive Image. And have had my days with Ghost and Acronis Trueimage. I recently built a clean Vista image on my T400, and I'd like to take advantage of the Lenovo Rescue and Recovery 4.21 tool since it the recovery technology is already part of my system and I have tested it once.
I'm used to the idea that a backup tool will produce an image file, which I can manage myself, moving to various media....hiding under my bed etc. With RnR, I've noticed it prefers to control the directory's where backups are placed (this is a bit annoying to me, but I can live with it, as long as it's isolated to the RRBackup directory - which it appears may not be the case). I do appreciate it's ability to specify various backup media locations (network, CD, 2nd HDD, USB) and recognize that it's a simple approach for basic usage.
Recently I've backed up my image to USB drive, and also to the local disk. I'd like to take that back up and split it up into DVD's and burn it to disk. I know there is a built in RnR feature which lets us copy backups from the local drive (why only local drive ??) to USB/Network/CD, but unfortunately the CD copy feature burns directly to my thinkpad burner...which is a CDR device, not a DVDR device. I'd like to use the DVDR device on my desktop...
Anyway, I'd like to know if there is more resources on how to manage RnR Backups. I found the following guide http://www-307.ibm.com/pc/support/site.wss/MIGR-70344.html (which is hard to get on Lenovo's site...google finds it better), I'm still reading it, but so far it appears more focused on the pre-desktop area than backup management.
Any insight would be appreciated.
Thanks!

Hi Danielle,
Consider this allegory; factory settings will make your thinkpad like a never driven 0 meter car [with reference to software]. Hence it will be far-flung from it's previous state. Apart from what you have already saved on memory stick, all settings and the software you have installed on the notebook will be lost.
I hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

I am completely in the dark about how to manage devices and use iTunes, are there tutorials available?

I am completely in the dark about how to manage my iTunes and devices.
I have a desktop with Windows 8 (ugh!!) and I have iTunes for Windows. My wife has a iPod Touch and I have an iPad 2 and an iPhone 4S. Currently, the only devices associated with my Apple ID are the desktop and the iPad. How do I add the iPod and my iPhone to the devices and how do I put "puchased" iTunes on my wife's iPod when attached to the desktop?
Thanks.
SEE

Try posting to the Enterprise forums... you'll probably get more appropriate responses and better exposure to individuals with similar setups/issues.

How to have Weblogic and BAM process run in background

I ssh to the Weblogic (also the BAM) server via putty and use below command to start the weblogic and BAM:
/opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh
/opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1
And then I have no way to have the weblogic and BAM run in backgroup as it needs to ask me for login and password. I cannot close the ssh connection neither otherwise the weblogic and BAM processes will die
Clay

Hi Clay,
Both these points can be easily handled.
To start admin server enter the below command with the &. This & will make the process run in background.
. /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
If you want the logs to be redirected to some file then you can use a nohup as given below
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
Same holds good for bam serevr also
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
OR
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
It will respond to you with the process-id, you can just hit an enter and safely close the putty session while the server is still up & running.
To stop the same, in a new putty session you can enter the below. Here you need not(will not) give &
. /opt/oracle/Middleware/user_projects/domains/base_domain/stopWebLogic.sh weblogic welcome1 t3://hostname:port
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/stopManagedWebLogic.sh bam_server1 t3://hostname:port
Password:
As you see above we are not passing user-id/password while starting the server. We need to create a file named boot.properties and place it in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security directory. security directoy will not be present, you have to create it.
Contents of boot.properties file will be only 2lines as below
username=weblogic
password=welcome1
On next startup server will encrypt the password.
Same boot.properties file has to be created in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/bam_server/security location.
Hope this answers your question.
Thanks,

How can i send and receive messages through CAN

Hi,
how can i send and receive messages using Vector CAN CARDXL

As mentioned in this forum post, if you have a dll, this can easily be called from LabVIEW or CVI.
I also went to the vector website and it does look like they have LabVIEW drivers available for download.
Peter Flores
Applications Engineer

How to manage pulp and paper processing through SAP

Similar Messages

Maybe you are looking for