How to manage special,invalid characteristics

Hi,
Whenever we face any invalid characteristics, special characteristics, How can we allow them apart from allowing them in RSKC. Is there any ABAP code to be performed to allow them. What is the maximum limit of chars allowed in RSKC.

Hi,
I would prefer going to RSA1OLD then do the necessary changes to the PSA data and load the data again from PSA to data targets.
Hope this helps.
PV

Similar Messages

  • How to delete PSA Invalid characteristics.

    Hi Gurus,
    We set setting in info pcakge for Error handling .
    Update Tab -->Error handling --> 3rd Option ,Valid record UPdate,reprotuing possible,
    If Invalid data comes then how do we handle it.
    Please correct/confirm the steps:
    We have kept setting in info package --> Update Tab -->Error handling --> 3rd Option ,Valid record UPdate,reprotuing possible, Terminate After No. Errors     50,000          
    If error comes then ,
    For BI 3.5 , we have to check in PSA tab and then need to see datasource with PSA showing red mark --> change PSA and then update manual immediately.
    What is the procedure in BI 7 for this situation.
    Please reply in detail.
    Thanks will be rewarded.
    Regards
    San

    Hi,
    I would prefer going to RSA1OLD then do the necessary changes to the PSA data and load the data again from PSA to data targets.
    Hope this helps.
    PV

  • How to apply  special right  to the PDF  file using the LiveCycle Rights Management Server.?

    How to apply special right to the PDF  file using the LiveCycle Rights Management Server.?
    I want  to edit bar code field data using Adobe Reader. Bar Code field was designed and data was changing using Acrobat X1 Professional (Trial Version). But can't do so in adobe reader.

    I think that product has nothing to do with it. You would use LiveCycle Reader Extensions.

  • Unable to select Card Manager or invalid FCI

    Hi,
    I have JCOP41V231 but I can not upload the CAP file.
    When I try to select the Card Manager I get an error 6A82.(see trace bellow)
    I asked the card supplier and he answer:
    "our all samples have not initialized. so you can cannot select the card manager.
    if the card have not initialized, and you can select wrong card manager, the card will be damage.
    please initialize the card."
    How can I initialize the card ?
    Is there a special tool to do that?
    /term "winscard:4|SCM Microsystems Inc. SCR33x USB Smart Card Reader 0"
    --Opening terminal
    /card -a a000000003000000 -c com.ibm.jc.CardManager
    resetCard with timeout: 0 (ms)
    --Waiting for card...
    ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 ;.....1.EJCOP41V
    32 33 31 97 231.
    IOCTL().
    ATR:
    T = 1
    => 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
    (9682 usec)
    <= 6A 82 j.
    Status: File not found
    jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
    Subsequent commands might fail! Inspection might not be possible!
    ??> set-key 1/1/DES-ECB/404142434445464748494a4b4c4d4e4f 1/2/DES-ECB/404142434445464748494a4b4c4d4e4f 1/3/DES-ECB/404142434445464748494a4b4c4d4e4f
    ??> init-update 1
    => 80 50 01 00 08 0A D3 1F 2B 09 F1 CD E2 00 .P......+.....
    (8444 usec)
    <= 6A 81 j.
    Status: Function not supported
    jcshell: Error code: 6a81 (Function not supported)
    jcshell: Wrong response APDU: 6A81
    Unexpected error; aborting execution

    Hi,
    I think that you didnt prepersonalisation. Once pre-personalisation you can enter card manager.

  • Transaction to manage special charactere in BW

    Hi,
    Is anybody could send me the transaction to manage special charactere ?
    Best Regards
    Gregory

    Hi,
    you are right with: the special characters in there are allowed in BW characteristics.
    But: not all characters you enter are also allowed to enter in there. I just had the issue, that I was not able to enter the euro sign &#8364; in there.
    regards
    Siggi

  • Oracle Worspace Manager in Invalid???

    Hi All,
    I queried dba_registry on 10.2.0.4 and there I found the 'Oracle Work Space manager' is INVALID.
    Please let me know how I can make in VALID.
    Thanks,
    B

    Have you upgrade your DB from a previous version ?

  • Invalid characteristics

    Hi Experts,
    One of my data target (cube) full load failed due to invalid characteristics, for this i accatable small letters in RSKC then again i ran the load same error occured, can any one give me solutiong.
    My invalid characteristics is Zinos so in rskc i have given ZINOS. is this right?
    David

    Hi David
    In RSKC you need to enter the 'value of the characteristics' in other words the special characters that you wish to consider as 'valid' during data upload in BI. You cannot give the Characteristic technical name in RSKC.
    Enter  1234567890ÁÄÉÊÓÔÙÜß´+#-.,<>°!"§$%&/()=?`*'_:;²³{['FR}]!()  CAPITAL_ALL
    Cheers
    Umesh

  • How to manage my call logs on att z 10.

    How to manage my call logs on att z 10.   I need to keep my call log for business purposes and they disappeared today.  I may have accidentally deleted them but I need to find out how to save and avoid deleting in the future.

    Deleted call logs cant be restored.
    There is no special way to save it, just be careful not to tap the Clear Log option.
    If my post has helped you, give it a LIKE

  • How to manage or monitor  My RTP stock in customer

    dear all,
    I  have RTP (Returnable Transport Packaging) material to deliver with material Ordered to customer
    how to manage or monitor my RTP Stock in customer ?
    and what movement type is used when i send to / received from customer ?
    thanks
    imron

    Hi,
    You can see the RTP at customer place in MMBe using special stock indicator 'V'.
    For more information check the following link:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/560051545a11d1a7020000e829fd11/frameset.htm
    Regards,
    Ramakrishna

  • How to print Special Characters in Sap-Scripts

    How to print Special Characters in Sap-Scripts
    Thanks,
    Ravi

    Hi
    if u want print special characters we can use hot codes i.e '  '  (single inverted commas). in between these hot codes insert u r special characters.
    write    '    !@#$%^&*( )  '.
    for the above write statement output is
    output is   !@#$%^&*( )

  • How to Manage the Resource Master in Primavera Enterprise Version

    We are using P6 enterprise version in our company having a central database. We had created our own unique resources and standardised across the enterprise and is Admin protected. However we often have to import some schedules sent by our consultant/client. In those schedules they have their own resources.
    So when we import these schedules, it also imports the resources along with it and pollutes our resource master.
    Can anyone let me know, how to manage such a situation.
    Regards

    We have met this issue. You have few ways to deal with it, but each has its own +ve and -ve.
    1- You may create a separate "Working" db into which you can import those files and keep them there only. Your master db shall be used for maters and your own program only.
    2- You may do the same for checking the resourses, vet them before importing into the final db
    3- P3 and MSP importation allows you to select the node to which the resources will be located. We have created a resource node called "Imported Resources" and dumped all those resources into it. Our users don't have access to that node so those resources can only be used on the imported program and can't be assigned to any other program / activity
    4- Enforce your supply chain to use the same resource list. We managed to do that for our main and subcontractors. That formed part of their contracts.

  • How I Managed to Install Windows 8.1 Pro on an iMac 27-inch, Late 2013

    As is typical with many of my Boot Camp installs, this one did *not* goes as smoothly as planned. This installation was particularly troublesome, so I thought I would share how I managed to set up Boot Camp on a brand new iMac (27-inch, Late 2013) using a Windows 8.1 Pro DVD and an external Apple SuperDrive. These are the steps I took:
    Download Boot Camp Support Software 5.1.5640 (http://support.apple.com/kb/DL1721)
    Copy Boot Camp Support Software to empty MS-DOS (FAT)-formatted USB key
    Run Boot Camp Assistant and select third option only (Install Windows 7 or later version)
    Computer would reboot after Boot Camp Assistant finished but would boot back into Mac environment and not continue Windows installation
    Boot computer holding down option key and select Windows (with DVD icon) and go through initial setup process (could go as  far as trying to format Boot Camp partition as NTFS and then got stuck)
    Quit Windows installer and reboot computer holding down option key and select EFI Boot
    Run Windows installer
    These same steps worked for another iMac (same model) that I set up later the same day.

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • How to manage one wsp and dll for multiple clients in farm environment

    1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
    previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
    the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
    will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
    related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
        Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture. 
    • SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
    • Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
    • Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
    In this scenario how to manage multiple versions of same wsp solution?
    Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
    css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
    thing is, how to manage dll files for individual client?

    It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
    Bluntly i don't think a single farm can manage all your user environments.

  • How to manage photos from multiple accounts

    Hi,
    i am trying to solve one problem. I have one iMAC where i have two user profiles connected to different AppleIDs. Next to it there are two iPhones and two iPads. I am trying to find out, how to manage photos from all these devices using one account on iMAC. Second question is if there is any finction in iPhoto that can publish images to NAS server? Second alternative for me is to byu iCloud drive space and use Family sharing for publishing photos. Bellow text schema is attached, it is only my idea and i dont know if this could work like this. Did anyone somehow solved this configuration? Thanks

    I can see the screenshot if I double click on it.  However, here is it again.  Being Halloween maybe it'll show.

  • My family put multiple devices on the icloud, and I need to know how to manage duplicate entries.  Specifically contacts.  If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

    My family put multiple devices on the icloud, and I need to know how to manage duplicate entries.  Specifically contacts.  If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

    All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.

Maybe you are looking for