How to manage streaming in different networks??........

hi,
can anyone tell me about how to manage one-one streaming thru different networks?.... For eg:- in a LAN connection, suppose 2 machines have ip's 192.168.0.1 and 192.168.0.153. but when the first machine is connected to internet, it's ip changes to say, 220.56.0.89. But the second machine even if it has internet facility , it's ip is still 192.168.0.153. how can i get the global IP of the second machine?
or,
How can i send/receive streams between these two??......

Backup to what where??
Do you mean backup to your TC sitting at home? Apple recommends you do not do it. It is too easy to corrupt and the speeds are too slow unless you have high speed fibre at both locations.
Do you mean cloud? Yes, you can probably backup your files to the cloud but you will need to pay for the extra storage and it is still very slow due to upload speed being a fraction of download.

Similar Messages

Itunes stream to different network

I'm trying to get itunes to stream music to an airport that's on a different network. How can you specify and IP for itunes to steam to? All it does it scan the local network so itunes can't find it.

Hello bhilimon1. Welcome to the Apple Discussions!
I'm trying to get itunes to stream music to an airport that's on a different network. How can you specify and IP for itunes to steam to?
Sorry, but you can't as I'm not aware that AirTunes is routable outside of the local subnet.

STREAMS between different networks

Could I use Oracle Streams to replicate between two computers located in different networks by using shared storage???
Thanks in advance.

http://support.apple.com/kb/HT5014
Once you have completed the unlock process as laid out by AT&T
you can change the sim at will
Although I usually switch off the iPhone before changing ( being careful)
I have at times hot swapped and had no problems
You lose nothing

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

How to determe Streams tcp/ip network traffic between database nodes.

We are needing to determine network bandwidth requirements for optimizing streams replication performance between database instances that are NOT located within the same data center.
How can I determine the rough # of bits per sec of tcp/ip traffic generated by the streams replication propogation process?

This is the information I got from our dev environment, not too much activity here, so is total time in seconds? so if I take total_bytes/total_time I get bytes per second right?
QNAME : VERITYUSR_CAP_Q
DESTINATION : NEWS.J513.BLOOMBERG.COM
TOTAL_TIME : 11487
TOTAL_NUMBER : 400329
TOTAL_BYTES : 5290
MAX_NUMBER : 400329
MAX_BYTES : 5290
AVG_NUMBER : 400329
AVG_SIZE : 0.01321413

How to manage shortcuts for different desktops

If you've set up multiple desktops (e.g., via Mission Control), how can you manage shortcuts independently?
It would be nice to have a dedicated desktop for:
Games
Multimedia / Photo / Video
Graphic Design
Programming / Development
Writing
Tutorial Recording
We can start applications in a particular screen, since Snow Leopard, similar to what Linux has been able to do for some time; however, these screens are not really desktops, since we can't dedicate certain shortcuts/icons to only appear on certain screens. At least, that's the problem I'm facing.
If it is possible, to hide/show icons on particular screens I would really like to know. Until then, it seems like Virtual Machines are the best way to do this, despite them eating up the extra resources.

We can start applications in a particular screen, since Snow Leopard, similar to what Linux has been able to do for some time; however, these screens are not really desktops, since we can't dedicate certain shortcuts/icons to only appear on certain screens.
Thanks, Eric. Perhaps I wasn't clear in the above. I realize we can start applications in certain desktops, but that is NOT what I'm after.
What I would like is the icons (i.e., shortcuts, directories, files) that appear on the desktop, to be different for each desktop. Such that if I go to Desktop 2, I can place all my game icons/shortcuts there. Then if I switch to Desktop 3, I might have all my Office programs there, but not my games. Does that make sense?
Eventually I might also want my Dock to have different icons based on what desktop I'm using, but I figure that's even more difficult.

How communicate two SLD in different networks together?

Hi,
we have installed a central SLD. Some SAP systems (ABAP and JAVA stacks) send their system data directly to a central SLD. But one java stack (NW 7.0) runs in a separate network and can not communicate directly with the central SLD. But there is a linux server with open connections to both networks. Is it possible to send data from the java stack over the linux server to the central SLD? Which software must be installed on the linux server?
Some technical help or suggestions will be useful for us.
Thanks and regards,
Helmut

Hi Antonio,
Are you able to ping both network from each other ?
If you are able to ping you Solution Manager from that network you can add that system in solution Maanger and then you can connect that SLD also.
Please also see below link that may help u
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Connect+Managed+Systems+to+SLD
http://wiki.sdn.sap.com/wiki/display/EP/4+SLD+(Post+Install)

One Cisco prime deployment for three physically different Networks

Can one Cisco prime deployment be used to manage three physically different Networks without creating a bridge between the networks. It is imperative that the networks remain separated but they will be managed by the same team so can you somehow use one Cisco Prime without the networks becoming connected

Hi,
I believe you can manage any device, if it reachable (ICMP/SNMP) to Prime Infrastructure.
Just make sure all the 3 different network reachable to PI, it's not required they're reachable among them.
PI itself do not do any bridging/routing between your 3 different network , therefore PI doesn't know if you can route between them or if they're separated.
Since 3 different network are not reachable among themselves, use 3 different seed ip while discovering.
Also, from management point of view, you can create virtual domain, group the devices network wise, & then while logging in PI, you'll the get feel if you're managing 3 different network by same PI.
But since we know that PI, all the devices of 3 different network, it'll consume the CPU/RAM/Disc space accordingly. therefore need to pay attention for the resources of PI
Using Virtual Domains to Control Access to Sites and Devices
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/administrator/guide/PIAdminBook/maint_user_access.html#pgfId-1056197
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

ONe Cisco Prime 3 different networks?

Can one Cisco prime deployment be used to manage three physically different Networks without creating a bridge between the networks. It is imperative that the networks remain separated but they will be managed by the same team so can you somehow use one Cisco Prime without the networks becoming connected

Prime is just a management tool that is used as more of a collaboration tool so you can manage devices in one place instead of physically touching each device so yes it can manage 3 different network as long as those networks are able to reach Prime.
I would create 3 different Virtual Domains for the network and only allow visibility to the specific devices that are in each network so you have complete segmentation.
Hope this helps!
Malwan

How to manage dell-2816 switch from remote network..?

Hi,
According to below diagram how can i manage the dell-2816 switch from other network. It has management ip only worked on default vlan and default vlan is not editable also not routed ,we can only access the switch to connect laptop directly to switch port and if the port has default-vlan id-1 .
switch to switch trunk doing problem but when using the pvid as a access vlan ID then trunk is working between dell to juniper hope so cisco also work. But the major issue is remote manageability and also snmp , If switch does not getting ping from remotely then how the snmp will work ..?
Thanks
Mamdud
<ADMIN NOTE: Email id removed per privacy policy>

You would need a layer 3 device on the network that would route between the different networks/VLANs. Without a device performing VLAN routing, your only other option is to be on the VLAN 1 network.
If you have a client with dual nic ports, you may be able to assign 1 port the VLAN 1 network. The other port would be on the network with the rest of the devices.

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How can I stream video from my laptop to apple tv while doing a different task on my laptop?

How can I stream video from my laptop to apple tv while doing a different task on my laptop? I want to be able to stream a video to my tv while browsing the internet or working on writing on my laptop. Thanks

You would have to use airplay within iTunes then, unless you want to use 3rd party software (ie Beamer)

ITunes i have downloaded some movies. i have an apple tv set up under a different account. how can i stream the movies from my pc to someone else's apple tv?

i have a windows based pc and on iTunes i have downloaded some movies. i have an apple tv set up under a different account. how can i stream the movies from my pc to someone else's apple tv?

If you wish to use home sharing then you need to setup the Apple TV under your ID.

How do I access a USB server on a "different network segment"?

I have tried posting this question in the Server community but with no response, however I believe the solution will be achived through Terminal and I believe there will be those versed in the use of Terminal here, so here goes.
I have a USB Server with four ports attached to my ethernet LAN. If I enter the IP address into Safari it shows me the Server details and the details of any item attached to any of the ports. However I cannot access anything on the server. If I put the IP address into Connect to Server I get an error message. Apparently the Server is on a "different network segment". How can I overcome this?
Attached pages from Safari.

MyBook USB=junk.
If you search the forums you will find many users with problems with this particular brand.
Does this drive have an external AC power supply brick? If not, Apple recommends the use of a powered USB hub.

How to manage streaming in different networks??........

Similar Messages

Maybe you are looking for