How to manage the font size for webRfc Reports
Hi All,
How to manage(increasing or decreasing) the font size for webRFC Reports.
Regards
Sri
Hi,
Can you try republishing and see ....
Ideally the font size would be controlled by the <font tag and if you have made changes correctly it should be reflected correctly.
Check whether the HTML code is also correct.
Thanks & Regards,
Vijith
Similar Messages
-
How to increase the FONT Size in a report while printing in SAP
Hi ,
Can anybody let me how how to increase the Font size while printing a report in SAP .
Thanks
Dhaval..hi Raje,
WELCOME TO SDN
use <b>PRINT-CONTROL</b> option
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
How to change font sizi in a classical report?
REgards,
Santosh
Message was edited by: Santosh Kumar P -
How to increase the Font size for elements in BSP Application
Hi,
I have an requirement where i need decrease the font size of the drop down list element at header level and table view level.
Thanks in advance.
Regards,
Warun.See the example below as Jain just described:
data: pv_drop_find1 type string value '<select ',
pv_drop_repla type string value '<select .... style="font-size: 7 pt"'.
<bsp:findAndReplace find = "<%= pv_drop_find1 %>"
replace = "<%= pv_drop_repla %>" >
<htmlb:dropdownListBox id ....>
</bsp:findAndReplace>
Regards,
Alexandre Rocha -
How to change the font size of pdf reports
hi,
in my project i'm using wad for my reports
when i execute these reports from wad and convert it into pdf format the font size of the pdf report is very small.
what can i do in order to rectify this?
are there any settings where i can change the font size?
thanks in advanceI do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill
-
How to increase the font size for text in the ibooks' dictionary
In iBooks for iOS 7, I know how to resize the text of my ebooks.
But how can I resize the font of the in-built dictionary?
Can anybody help me?The dictionary display appears to be using Dynamic Type, so you can increase its size via the Larger Type function. However, this will also increase type size in a number of other application as well (Messages, Mail, etc.).
Settings app > General > Accessibility > Larger Type (turn ON, the use the slider to set the type size) -
How to change the FONT size for a TEXT object?
Hello
I am keeping a TEXT element to get a static text (as 'Visitor Info Form'), so i inserted TEXT from palattes, its size is Aerial 10, but i want to have its size as 24, I tried by right clicking on TEXT, then selected FONT, then choosen the 24 from drop-down list, its not working/reflecting!! but, when i change the PARAGRAPH settings, they are reflecting!
Pls. let me know how to change size from 10 to 24?
Thank youDon't specify the styleclass for the inner panelHeader.
<af:panelHeader text="panelHeader 1" id="ph1" styleClass="CustomHelpHeader">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelHeader text="inner panelHeader" id="ph2">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
</af:panelHeader>
</af:panelHeader>
The inner panel header does not get affected and is displayed normally.
Thanks,
Navaneeth -
How does one change the font size for folders and/or file lists in the Bookmarks Library?
How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ -
How to change the font size of text and case in smartforms
hi,
could any one explain how to change the font size of text in smartforms. ex. previously i had taken P4 left aligned and C6 but now i want to decrease the font without making it bold. pl......... guide me
secondly the value which are coming from tables are upper case but i need lower case. pl. guide
thanking ucheck out the smart styles...create a font of ur size n use.
Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
You can define font size in Smartform Style.
Smartform Styles > Charcterformat> Font --> size.
to load the font to SAP server chk this
Re: Adding a new font for SAPscript/SMARTFORM output
Regards
Vasu -
How to change the font size of text element in smartform
Hi
i want to know how to change the font size of text element in smartform
regards
GincyHi
You can create Smartstyles, in which you can define paragraph formats for texts and character formats for character level changes.
Paragraph format ---> alignment, font size etc
character format for ---> superscript, subscript.
After creating, in your smartform, there will be a option in the text element to enter a style.
You give the created style and you can use the paragraph and character formats i that style.
Hope this is clear..
Regards
Sekar -
How to change the font size of Text Box Properties Appearance tab into 2 decimal digit.
How to change the font size of Text Box Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.
Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
go to Font
choose desired size and type font,you can choose to make this the default.
Do this with each field.
Or if you have a lot of fields:
while one is selected select all of them
then go to fonts in properties
change Font and size and make default. -
How to adjust the font size of iPad in printing a web page.
How to adjust the font size of iPad printout of web pages ?
In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like <center> and <font>. Assuming this text is the primary heading on the page, use <h1>:
<img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
<h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1> -
How to change the font size in sap scripts?
hi friends,
i had a query regarding to SAPSCRIPT.
how to change the font size of a text in sap script form in which it should change it dynamically.
is it possible to change the font size dynamically in scripts.
one more query regarding to this only.
i need to get the hard copy of a script .
what is the transaction code to get the hard copy?Hi venkata,
You can specify the font size either in the Character format or pharagraph format.
You better decide it according to your requirement. If you want to apply the same font size for the entire form create the Paragraph format and give the paragraph format in the default paragraph format.
If you want to apply that to limited text, then create character format.
The process of creating it is just after going inside paragraph format click EDIT-> Create Element and give the font size.
This applies for character format also.
Reward points if useful.
Thanks,
karthik -
I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?
You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default. -
How to reduce the font size - "Portal Smart Text - CURRENT USER"
Hi Gurus,
I am showing the user name on the top left corner of our portal page. The default font size is little big(16 point size). How can I reduce the size to probably 10. I am using the "Built-In Navigation Item Types - Portal Smart Text - CURRENT USER" which shows the name of the current user. Please post a reply if you have any idea about this.
Thanks
Raj
--------Put the item in its own region, assign a different style to the region, and set the font size for the Display Name attribute in the region's style.
Or, you can use a PL/SQL item with this code:
begin
htp.p('<font size="-3">
|| portal.wwctx_api.get_user
|| '</font>');
end;
Regards,
Jerry
PortalPM -
I do not know how I changed the font size on my face book page I have tried everything to change the font size to 100% but have failed. Any suggestions?
Hi,
From your description, you want to know how to edit a page in SharePoint 2013.
Go to the page->click Settings->Edit page,refer to the following screenshot:
If a user want to edit a page, he at least have edit permissions.
If you have any problems, please don't hesitate to let me know.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Airport express won't extend network via ethernet but shows GREEN (HELP!!)
I have the following routers setup up the same network and are working. 10.0.1.1 Airport Extreme (connected to hardline from IP) 10.0.1.2 Time Capsule 1 (extending network and providing internet connection to computer via ethernet) 10.0.1.3 Time Caps
-
it's my understanding that when traveling overseas, all i have to do is turn off cellular data to avoid high data charges.
-
G'day all. I am wondering what are options available in SAP if we'd like to put additional user restriction base on organisation structure. I know the structural authorization but if we don't have HR module, what sort of options available in the sta
-
Re-installing Airport Express Assistant.
Hi all, I've got an Airport wireless network with one Airport Express used to extend the range. Everything is working fine. However, due to a repair to my PowerBook my hard drive was wiped and I reinstalled the Airport Admin utility instead of the Ex
-
Going from 10.6.2 BACK to 10.6.
I'm on 10.6.2 now. It works great. Only problem is ProTools is not supporting this version yet. Who knows how long it will be until they release an update for said version. Is there anyway I can revert to 10.6 or 10.6.1? I do not have an external dri