How to manage two quantity of two unit in process order?
Hi Guys
In our plant, we have actived the catch weight management. For products A, we have set the standard conversion relation as follow: 1 EA (basic of unit)= 2.5 KG (production unit).
But when I create the process order for products A, I only can input the quantity of production unit(1000KG) and the quantity of basic of unit cannot be inputted. It will be calculate by standard conversion relation. Now I want to create the process order by using two quantity of two unit(1100KG 400EA). Because we want to see the production plan by using two unit.
Is there some method to do it?
Hi,
maintain the unit of conversion in Units of conversion in Material master in addition data..from PC to CAR..here base UOM is PC. CAR alternate UOM.
Now in material master in work scheduling view maintain CAR as production Unit as shown below..
Now when u create process order you will get like this..
Thanks
Kumar
Similar Messages
-
Re: Target Quantity in Cost Analysis for process Order
Hi ,
How is the target quantity is being calculated in Process order.
Two of BOM components total target qty, is different from the plan quanity.
Please advice.
Regards,
Vivek SharmaHi Vivek,
Can you pl share the cause of the same.
Ulhas -
How to manage one library with two accounts
how to manage one library with two accounts
you can only be logged into one account at a time on the iTunes store. However, you can authorize your computer for both accounts, making your computer work with both. In the menu bar just click [Store > Authorize Computer]
-
How to create Handling Unit using Process Order no. & Packing Instruction
Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
YogeshHi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh -
How to manage the Credit Control for Customer Consignment Process?
Hi All,
Could anyone tell me how to manage the Credit Control for Customer Consignment Process?
ThanksHi, there is not standard solution, we did customized process for consignment credit block , check below
1. defined status profile - with lock/auto/approved/rejected and new t.code for approval or rejected.
2. maintained consignment credit limit in Z table
3. logic for detemining status written in sales order save userexit.
4. while calcualting the values, system need to check open sonsignment order of customer/ open deliveries/ stocks at customer place MSKU table. and calculate value with MBEW/KONV ect.
5. if value is less than Z table then status AUTO, which do not need release, if value is greater than Z table put status LOCK means credit block need to release from new T.code.
Hope you get some idea -
How to have confirmed quantity 0 for credit blocked sales orders
Hi!
I have the following problem. I have one sales order blocked because credit. Using material A the quantity confirmed is 0 but using other material B the quantity is confirmed. All the materials have no avaliability check group no arelevant for vailability .
How can I customize in order to always have quantity confirmed in 0 for sales orders bloked because credit check?
Thanks in advance for your help!
Regards,
Marina.I resolved the issue
-
How to set Confrimed quantity as 0 in the sales order line item
hi all
i have a requirement that my user dont want to see confirmed quantity in the sales order line item.
scenario is make to order.
i have set strategy group is 20 -make to order
MRP Type is PD
Lot size -
EX , still its showing confirmed quantity.
could pls any one tell me how to set 0 quantity in the sales order line item
thnxDear Sateesh,
If the availability check is carried out and stock is not there in our plant, then it will show the confirmed quantity as Zero.
If you don't want to carry out the availability check,
To achieve this,
1. Remove the availability check in the transaction OVZG against your requirement class.
You can find the requirement type assigned to the sale order in the procurement tab.
In OVZH transaction, you can find the requirement class assigned to your requirement type.
2. Remove the availability check for your schedule line category in VOV6.
In the material master MRP3 view, you ll be having Availability check, there you need to specify the availability check..
If you specify it as KP(No check), then it will confirm the qty, though the stock is not there in our plant..
To meet your requirement, you have to prefer user exit.(Correct me if I am wrong)
Thanks,
Venkatesh.S.P -
Ugent: How to restrict a Material Type for a Specific Process Order Type
Hi All
Can any one please tell me how to restrict material type for specific process order type
We have Process Order type ZPBS for finished materials but while creating process order
if i give the material of semi finished material type the system let me create the process order
it should not as we have a separate process order type for semi finished materials that is ZPBS.
And vice versa
Please help me how to restrict these material types for specific Process Order Types.
Points ll be awarded accordingly
Bilal AtharHy Ghulam Mohammad,
Good Morning,
Pls go through below link
[http://www.sap-img.com/abap/what-is-user-exits.htm]
[http://www.sap-basis-abap.com/sapab013.htm]
Now regarding How to place your checks in User Exit, then pls explain your requirements to your Abaper , so that he or she can write it into programeble language.
Regards,
Dhaval -
How to manage graphic lines in two different panes
Hi All,
I am working with one application that have two Jtree Visivle. There tree are visible in left and right side of a frame. Using panels I have put SplitPanes in these . Now my problem is to draw a line from left tree node to a right tree node. Using paint method and getRowBound I use to find the points I am able to draw a line.
My problem is , now these two trees are in different panel so I will be having a different graphics object on these panels. Secondly once I draw a line and when I scroll any tree the lines become static . I want that lines should always remain with those node even when I am scrolling.
Please help me regarding this.
Regards,
Sandeephttp://forum.java.sun.com/thread.jsp?forum=54&thread=274709
-
Update required quantity for material component in Process Order.
Hello.
I need update component qty from Z dialog program.
The famous BAPI_PROCORD_CHANGE doesn't deal with COMPONENT structure but only HEADER. Then I tried to combine it with an enhancement.
I see that in WORKORDER_UPDATE~BEFORE_UPDATE I can't change values in IT_COMPONENT.
Anybody have used enhancement for this purpose and how can I transfer my calculated values to order?
In addition I check ENHANCEMENT-SECTION CO_BT_ORDER_POST_02 SPOTS ES_SAPLCOBT to do it.
What syntax our developers should write if it's possible?
Thanks
Alex DavidovKumar.
What should be copied? The header batch or some/all of the characteristics of the header batch to a new batch for the component?
Anoop -
Making Grid out for quantity column for Tcode COR7 ( Process Order )
Hi,
I want to make grid out for quantity column for tcode COR7 and when i click material button we will get components so there i want to make grid out .......So please suggest me the user exit name which i can use and make it grid out........Hello SM,
Go to T.C COB1 and select the strategy group which is maintained in the Batch search Procedure which you maintained in the order type dependent parameters.
After that for the combination of material number,order type and plant maintain the sort rule (on the same screen select the sort rule tab and maintain the sort rule created) and the selection criteria (select the selection criteria tab and select the possible characteristics.Maintain the all the material number for which you want this automatic batch determination.
Check and confirm.
Thanks and Regards,
Jitendra.
Edited by: jitendra chauhan on Jan 2, 2010 5:13 PM -
How to assign Inspection characteristic to the Phases in Process order
Hi PP/QM experts,
There is business requirement to assign Master Inspection
Characteristics to the Phases in the process order. But there is no
functionality to assign MIC's in process order. So this is stopping me to map the scenario for Rework execution.
Requirement is results recording is required for additional added phases (Phases added to the process order to perform Rework) in the process order.
Expecting to provide a possitive solution to resolve this issue.
thanks®ards,
Himahi hima
there may be one solution that if you maintained separate master recipe for rework and maintained inspection characteristics there.and while creating rework order assign that master recipe. that would help you to result record.
and one more solution is that you have to maintained inspection characteristics for your rework phase in the master recipe.
if any query please come back
Regards
Pravin
Edited by: pravin dhokey on Jan 15, 2009 10:01 AM -
Comitted Quantity in Process Order
Hi PP Gurus,
I have two process orders. Both have been confirmed by T. Code: CORK and delivered in Status.
In one process Order: At Dates/ Quantities Tab-- Comitted Qty is shown as process order Quantity.
But in another process order: Comitted Quantity is not shown.
can anyone give feedback on why it is so and what is the significance of comitted quantity?
Thanks in advance.
PradeepDear pradeep...
the committment quantity mentioned in Dates/quantities tab depends upon ATP check.
Mr sampath has said it correctly, there must not be any components available while creation of order.
Stock is not available thats why System is not showing the commited quantity.
So first maintain the stocks for all the components
Cheers...
Edited by: Rahul Vijay Pande on May 9, 2011 12:17 PM -
How to ignore pegging from a process order in APO?
Hi! Experts,
I have an requirement in APO 4.0 that I need to make process orders not relevant for pegging i.e. since the process order gets automatically pegged to the newly created demand elements. I need to ignore pegging for some specific supply elements (process orders).
I have found the BAdI /SAPAPO/RRP_PLANNING which gets called when a Heuristic Run is done from a Product View. Also, I have found internally that if the PEG_ID of a Process Order is removed programmatically a new Plan Order gets created of the same quantity. However, the old Process Order still remains pegged with the Demand Element & the newly Plan Order does not get pegged to the Demand element.
Please help me with this issue as I am new to APO ABAP.
Also, please revert with your valuable suggestions or in case you require any further information on the same.
Thanks in Advance
Regards,
Mistry WasimHi! Nitin,
Thanks for your quick response.
But I need to ignore pegging for some specific Supply Elements like Process Order (Released) other then that I want the dynamic pegging to be there for Plan Orders.
I mean to say, that if the Process Order(R) gets 'Not Relevant to Pegging' (one of the column in Product View) system will automatically create Plan Order to make the sum as zero for the Demand.
Also, using the above mentioned BAdI I succeeded to some extend like if I remove the process order line item from internal table CT_IONODES in method PEGID_GET_IO a corresponding new Plan Order gets created but still the major issue to ignore pegging of Process Order remains as I can see the same in the 'Context' for the Demand.
I hope this would provide you with more inputs on the requirement.
Regards,
Mistry Wasim -
I have 2 Adobe CC subscription plan under same adobe ID, but i only can manage to used on two computers. How can I activate another the second plan.
Hi AndrewHISC
We would need to cancel one of the subscriptions and then you could sign up again using another ID.
Let me know if you wish to proceed with this.
Kind regards
Bev
Maybe you are looking for
-
Error in phase IMPORT_PROPER TP_BUFFER_INCONSISTENCY return code 8
Hi, When applying add on programs ST-PI version 2008-1-700 (SAPKITLRDA) with transaction SAINT the TP_BUFFER_INCONSISTENCY error occured during the IMPORT_PROPER phase. Error message: Pkgs. in queue don"t exist in the tp buffer (e.g. SAPKITLRDA) It i
-
Dear Gurus! we are facing a peculiar issue. I have created 2 'GUI for HTML' transaction iviews one connecting to 'copy of dev ': ECC:system number x, and the other connecting to 'copy of quality': ECC, System number y. Both these ECC systems have sam
-
a cross between question/comment/complaint... on my alias 2 i was able to assign a ringtone to all txt messages Q. why can't this be done on my new Samsung Galaxy Note ll under the message setting I can select notification setting with a ck mark and
-
I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?
-
Create heading in a New Report in Report Painter
Good day everyone! Does anyone know how I could add a header or heading in my report? Im new with Report Painter and I can't seem to find any related literature about making a header in Report Painter. Thank you very much! >Christian<