How to manange 1min 6 sec 1080 24p clip in Motion3?

I've worked with small 30 second clips in Motion3.
Now, I've got a 1920 x 1080 24p ProRes HQ clip, where I want to add text and sounds, and I'm not sure how to deal with it.
At least until Snow Leopard, I can't seem to even bring in the full length of this clip - it pretty much locks up Motion.
How can I break it up (I guess into two motion files), while not causing a glitch in the video or sound?
Breaking it up might not be hard, but getting it stitched back together without a glitch worries me.
BTW - will this change with Motion3 in Snow Leopard, or am I going to have to wait further?

Mark - I misspoke, it is a 3.39GB Animation codec 1920 x 1080 24p ith an alpha channel.
I changed the length of the Motion project to 1m 16 seconds (as I have some additional motion magic before my long clip starts).
When I do this, Motion has issues. I can position the timeline near the end and start playing, and the timeline will not move but the whole thing starts playing from the beginning.
Or, it will 'beachball' on me, and take 15 seconds to start playing, give me video but the sound will cut out. Or just basically act wierd.
I have the quality set to draft. I've tried running my monitors in 'mirror' mode so that the full video VRAM is available on my card.
I would generally do a RAM preview, as this type of file seems to slow my MacPro down a lot (even with smaller lengths), but I can't fit the entire clip into ram preview.
It just doesn't seem to like this large of a file.
Stupid question: I've looked, and can't seem to find the very obvious way to set a selection range so I can RAM preview just that range (I can do this in FCP, but never learned how in Motion).

Similar Messages

  • Upgrade to 10.5.7 and now i get 1080/24p on tv??

    I was hesitant to upgrade to 10.5.7 considering all the issues specifically centered around the screen issues since id already had problems hooking up my hdtv and detecting proper settings. i finally made the jump yesterday, and lo and behold , instead of my tv reporting 1080p simply, it now reports 1080/24p!!
    this is all well and good, except the slight problem, if i can call it that, is that i noticed the mouse has suddenly gotten very sensitive, even though ive notched down the sensitivity, and it seems a bit erratic.
    secondly, ive noticed when watching tv shows through my mini, i now have audio/video sync issues. i realize thats probably because the tv is now internally converting all video to 24p, while sound is still synced with 30/60hz. any idea how to fix this? the wierd thing is i can no longer find a 1080p output option, its either 1920x1080 at interlaced, which will not cut it, or 1920x1080@24hz.
    anybody else seeing this? i havent read anything about this yet.

    I am having the exact same problem, have vista/hp media center also, sometimes if I double click it will open after all, the arrow keys do navigate however, any suggestions?

  • 10 bit 1080/24P HD, downconvert in software?

    I have 10 bit HD (from D5) 1080/24P material on a firewire drive for editing on a MetaSan dual 2.5 (8G RAM). Running FCP 5.02 with 10.4. It was encoded into a Blackmagic codec quicktime.
    Material is supplied from telecine on FW drive (only have SD Kona card on system.)
    I can't view material clearly so must downconvert. Can I downrez to DVCPRO-HD in software using Compressor?
    I'm in over my head right now. My last project was DVCPROHD and it went fast and well. This 10 bit work flow is sending out warning lights.
    This is for a feature trailer, need to show to investors in boardroom on HD Plasma or DLP.
    thanks ,
    Caleb
    Good Film Maker, Bad workflow artist

    Here's a test for you and them to run.
    Take a series of respresentative clips. Wide gamut, fast action, brilliant colors, b&w, and so on.
    Bring each clip into Compressor and generate a ProRes4444, ProResHQ, ProRes standard and ProResLT version.
    Import all the clips into FCP and put the original 10 bit clip on the timeline then superimpose each version of the ProRes conversion using the Difference Matte. What do you see?
    Now put each clip through the scopes and compare. What do you see?
    Now play each on a broadcast reference monitor. What do you see?
    I'd be willing to bet std ProRes will be fine. The bigger question is how much support Apple will be offering for ProRes as a legacy codec in 10-15 years.
    Please report back.
    x

  • Dropped frames from XDCAM EX HD (1080/24p) - Seems like a bug in FCP 6.

    We're editing XDCAM EX HD (1080/24p) using the built in easy setup and dedicated built in drives as scratch disks. We have run all software updates and have the latest builds of final cut...
    We keep on experiencing dropped frames on playback, but only on our NEW 8 core Mac Pro not on any of our other Mac's including our MacBook's.
    Through a painful process of elimination, we found out that if you go to System Settings/Playback Control and you switch Gamma Correction from Accurate to Approximate it solves the problem. We have no idea why and would love an answer from Apple on this.
    Moreover is this a bug or do we need to amend something on our system. As a note we've already matched pairs on the RAM and done all the other obvious stuff.
    Regards
    Daniel

    Having the same issue with same format footage (1080/24p), the proposed solution works (a little). I can definitely playback a longer duration but it still drops frames. Even when putting a filter on and rendering it still drops frames.
    Mike

  • How can I get iPhone 4S 1080 Video to YouTube?

    Loving my iPhone 4S, but a bit frustrated by trying to get 1080 video uploaded to YouTube.
    I tried uploading directly from the iPhone 4S, no dice.
    I tried uploading to YouTube from the iMovie App, no dice.
    So, how is this done?
    Thanks.

    1080 is possible on YouTube.
    Again, the question is HOW this is done.
    I'd like to hear detailed, precise and specific instructions from somebody who has actually done it.
    I've got enough questions myself already, if you don't know how to do it, please refrain from sharing your ignorance here. I've got enough of that by myself already, thank you very much.

  • Importing 1080/24p sequence into DVD Studio Pro 4

    Perhaps the answer here is as simple as "DVD Studio Pro doesn't do Blu-ray." In any event, I recently got a Sony HXR-NX5U, which, among its many functions, shoots 1080 at 24p, 30p and 60i. Following these instructions from Ken Stone (http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html), I was able to output a 1080/24p movie and burn it to the hybrid format he describes, which plays fine on my PlayStation 3.
    However, when I try and bring the files that were created as a result of the "Share" command in FCP 7.0.3 (which are an ac3 file and an H.264 file), DVD Studio Pro will not recognize the H.264 video file and says that it is invalid. I'm assuming that the "Share" command creates these files via Compressor... if I'm wrong, please let me know.
    However, if I just do a straight export of my 1080/24p timeline as a QuickTime movie, then DVD Studio Pro will accept the files, marking it with a "yellow" indictator, indicating that it needs to be processed.
    What I'm wondering is... is there a way to export using Compressor so that DVD Studio Pro will accept the files? If I just do a straight export from the FCP timeline as a QuickTime movie and let DVD Studio Pro do the encoding, will it remain 24p?
    Bear in mind I'm not trying to burn a blu-ray disc.
    Thank you!

    DVD SP does't do Blu-Ray.
    If you have time to kill, do a search on the forum for hours of entertaining reading on this subject.
    To create a DVD, use Compressor to generate the m2v and ac3 files needed by DVDSP to author a DVD.
    Again, a search of this forum will turn up hundreds of threads - most of which are restating the process for authoring that is spelled out in the manual.
    x

  • Need to edit 1080 24p 7D footage and 50i SD XL2 footage in same timeline.

    Any help would be appreciated. Editing using latest Final Cut Studio on a Mac Pro and a Mac Book Pro.
    I have Canon 7D 1080 24p footage and 50i SD 16:9 Canon XL2 footage to edit together in the same timeline.
    Outputting as an SD DVD. I'm working with PAL all the time. I was under the impression that 24p was PAL, but have been told that 24p is NTSC.
    I convert the 7D footage to Pro Res LT. Then what do you suggest?
    Do I use Compressor or Cinema Tools to "conform" the 24p to 25p? And then work in an SD timeline suited for the 50i footage? Would I be automatically making the 7D footage SD if I move it into the SD timeline? Thanks.

    In case any one needs the answer to this in the future, I think I've stumbled upon the solution elsewhere.
    Change the 7D footage to Pro Res LT. Using Cinema Tools, convert it to 25p. Drop the 25p footage into a Final Cut timeline that is set up for the 50i footage. I haven't tried it yet, but will.

  • 1080 24p footage ready for youtube. best settings?

    I've got a video that was shot in 1080 24p in Apple ProRess 422
    i'm ready to send it to youtube. what's the best way to get it from my timeline to youtube with having the best quality and smallest size?
    i've tried using Quicktime Conversion for h.264 out of final cut with multipass and best quality with automatic kbps setting.
    is there something else i should do? should i send to compressor? is there another setting? a better kbps setting i should use?
    because when i use my settings as i mentioned above, i love the quality, it's just my videos are still very large (4 minutes is about 2.7GB's) and it takes forever to export and upload to youtube

    Hi There,
    I'm no expert here but i have just sent a video to youtube a very crude way but it looks pretty good and it was 1080.
    Select your sequence then FILE-EXPORT-QUICKTIME MOVIE
    Once its on the desktop open the movie using Quicktime X, on the playback bar there is a little arrow icon, click this and there is an option to export to youtube, enter your user name and password and your away.
    My movie took about 1.5hrs to upload.
    Not an ideal solution but a quick and dirty way of getting your HD stuff onto youtube looking fairly decent !
    Hope this helps.
    Regards,
    Dave.

  • Sony HDV 1080 24P

    I have FCP v5.1.4 and I'm about to buy a Sony HDV camera that can record in 1080 24p. I'm not sure which codec to use when editing, because I want to use 24p and edit in 24p, but I've heard that there are problems that may arise when editing in 24p. Is it possible to capture the video in DVCPro HD and edit that way without a problem?
      Mac OS X (10.4.9)  

    I capture using the Apple Intermediate code. There've been several threads about this. Do a search and you'll find a lot of information.

  • 1080 24p export to DVD

    had a question about 1080 24p going to NTSC DVD.  should i just render out a 720x480 widescreen 24p file for the DVD from Premiere?  another size i've seen is 720x405, not sure why the 405?
    or should i render the 1920x1080 24p file into MPEG2 out of AME or Premiere for the DVD using a preset?
    i'm building the DVD in DVD Studio Pro and the menu in Photoshop at 720x480 widescreen (D1/DV NTSC 1.21).

    i've seen in AME the presets, that's probably what i will use.  is that preset 720x480 or does it export at 720x405?  the only reason i ask is on this project i received some footage that was 720x405 with letterbox, that was probably intentional to use the black letterbox...do you have an opinion on that?

  • 1080 24p vs. 1080 24pA

    I am shooting to P2 cards and also to the CitiDisk using the Panasonic HVX200 and am editing using Final Cut Pro 5.0.4. I was told that after importing footage shot in either 1080 24p or 1080 24pA I would need to go to "Tools" -> "Remove Advanced Pulldown."
    When I select that option however, Final Cut Pro gives me a message telling me that the footage does not contain advanced pulldown. Isn't that what the "pA" feature means? Am I doing something wrong?
    Neither setting requires rendering on the Final Cut Pro timeline, but now I'm unclear wether I should shoot in "p" or "pA" and wether or not I am actually getting 1080 24p footage...
    Please advise! Thanks in advance for your help!
    - Jordan

    Your workflow is correct, but there's no Easy Setup for this. Just import the files into FCP.
    When you drag the first clip into the Sequence, you will be asked if you want the Sequence Settings to match the footage. Choose Yes and you're good to go.

  • Shooting in 1080/24p - exporting as PAL

    Hi,
    Does anyone have experience with shooting footage in 1080/24p mode, editing with FCP (1080/24p mode), and then exporting it as PAL 1080/50i?
    Does the image get distorted or something like that?
    I have a camera with 1080/60i and 1080/24p, and I need to send some DVDs in PAL
    (or should I export it in FCP as 1080/24p and then use iDVD?)
    Many thanks
    ~y

    how does FCP turn a 24fps clip into 25fpc?
    You should not do this in FCP. Edit your 24p project and export it as it is.
    Then you can take that master file, either to a facility that offers real time hardware based standards conversion, or do it in software -which will take quite a while.
    Software standards converters include JES Deinterlacer (free) or Natress Standards Conversion ($100). JES will do a decent job but in the end, you get what you pay for.
    Compressor will do it too, but it takes ages and I think the result is not really worth it. If you do choose to convert, have it done properly by folks who know what they are doing. It's not a good stage in the workflow to start trying to cut costs.

  • 1080 24p workflow

    I am using the Canon T2i and shooting in 1080 24p (23.98). I am transcoding in moegstreamclip to ProRes 422 and leaving the frame rate blank. I am assuming that when I use the FCP Video settings of ProRes 422 1920x1080 24p it is going to work with my 23.98 footage. Would this be correct?
    Thanks

    Your workflow is correct, but there's no Easy Setup for this. Just import the files into FCP.
    When you drag the first clip into the Sequence, you will be asked if you want the Sequence Settings to match the footage. Choose Yes and you're good to go.

  • 1080 @ 24p to NTSC

    Hi we are making an animated TV series in 1080 @ 24p.
    After our NTSC 29.97 pulldowns, the duration of our show becomes longer; thus we need to cut the timeline to 23:58.16 (in FCP) in order to achieve 24:00:00 at 29.97.
    First of all, is this normal? Shouldn't the pulldown keep the duration more or less the same?
    Secondly, what percentage of retiming control (in Compressor) should we use to get our 24 to the duration of the 29.97?
    Thanks for looking!

    PAL is 720 x 576 pixels interlaced (bottom first).
    If it's 16:9 aspect ratio, you need to select "Anamorphic" and the frame rate it 25 fps.
    If you need help with Compressor settings - I use Best for everything including re-sizing - processing is slow but the result is excellent.
    I believe you can use MPEG Streamclip for converting, but I have not tried it.
    Andy

  • How do I 'Log and Transfer' 1080/ 60P from my Panasonic TM700 camera?

    "How do I 'Log & Transfer' my 1080/ 60 Progressive format from my Panasonic TM 700 HD camera?

    If you have FCP X 10.0.5 you do it the normal way.
    However, if you also have normal AVCHD on the same card you probably won't be able to do it easily.
    1080/60p should be shot separately.

Maybe you are looking for