How to manually add RAC Resources

I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
I lost the disk that contains the OCR, which was not mirrored. :(
I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
These resources were registered automatically when the DB was created using OUI and selecting cluster installation
How can I use crs_profile and crs_register to manually add/register these resources?

user616051 wrote:
I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
I lost the disk that contains the OCR, which was not mirrored. :(
I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
These resources were registered automatically when the DB was created using OUI and selecting cluster installation
How can I use crs_profile and crs_register to manually add/register these resources?ah ... a promising candidate for a RAC certified expert Certification ;-)
There is a RAC forum that should help with RAC/clusterware installations : RAC, ASM & Clusterware Installation
Best to mark question answered here and post in that forum ... rgds - bigdelboy.

Similar Messages

  • How to manually add second detail on master detail page

    Hi,
    Apex 4.1
    can anyone tell me which steps to take excactly to manually create a second detail region on a master-detail form ?
    So far I've copied the first detail region and customized it to the second detail table. Copied the processes and adjusted them.
    What happends now is whenever I push one of the 2 "add row" buttons the rows are always added to the last region shown on the page. (also if I try to change anything on the data on the form and submit it all kind of errors show up )
    It seems like the javascript:addrows() does not work for the region it's defined in, but how to adjust this ??
    If I'm forgetting any other steps please also let me know.
    Found multiple threads on this but so far no explanation on how to manually do this.
    Cheers
    Bas

    Bas,
    Multiple tabular forms or detail regions on a master-detail form are not yet supported. So you best option would be to make one or both of the detail regions read-only report regions with edit links on each row, which would take you to a detail edit page. Alternatively you could try to manually build two tabular form regions on your page, however you will not be able to use any of the built-in tabular form features then, incl the add-row functionality, the multi-row update processes and declarative validations. So all of this would need to be hand-coded in PL/SQL and JavaScript. We have plans to support multiple tabular form regions out of the box, but we don't yet when this might make it into APEX.
    Regards,
    Marc

  • How to manually add library to my WL domain using admin console?

    Hello All,
    In need to manually add the JSF2:0 shared library into my
    domain using the admin console. How can I do that?
    Should I go to Admin Console -> Deployments -> Install -> Upload (from my desktop) -> now how do I tell where this should be installed in weblogic?
    Thanks,

    this link http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13952/taskhelp/library/DeployLibrary.html shows the steps involved

  • How to manually add rows to DataSet ?

    Hi,
    Apologies if I have missed something obvious - but how should
    I manually add rows to an empty dataset ?
    I've seen the setDataFromArray example in the
    samples
    - but I just want to take a value from a form field and add it to
    the dataset.
    Thanks,
    Richard

    I've just answered it myself...
    use this in the head :
    var ds1 = new Spry.Data.DataSet();
    ds1.data=[];
    function addToDS(newItem){
    // Create row id
    var recordID = "ROWID-" + ds1.data.length;
    // Add new record to the dataset
    ds1.data.push({ myItem: newItem, ds_RowID: recordID });
    ds1.loadData();
    Just call addToDS(value of an input field) using an onclick
    event.

  • How to manually add music

    I want to add music manually from my mac. however when i try to set it up to do that, it wipes my itouch music out completely and have to do a complete re-sync for music from the Library. Isn't there some way to sync it and only add new music that i have added?
    Also, how do only add certain tracks on the albums that I have added to library. thanks in advance to help!

    I just use the manually manage music selection. I don't ever sync music because my music library would be huge and I constantly add and delete music.

  • How to manually add audio book to the ipod

    How do I manually add an audiobook to my ipod?

    First make sure your iPod is set to manually manage by enabling the Manually manage music and videos option from under the iPod's Summary tab.  Once you have done this, you can manually click and drag the audiobook and its tracks over to your iPod from under the Devices section in the lefthand pane of iTunes.
    B-rock

  • How to "manually add songs" only

    A few simple steps to manually manage your music in your iTunes so that your manually add songs to your iPod (provided the song amount, i.e. the Gb used, is less than the storage capacity of the touch device used).
    Step 1.
    Create a playlist and drag every song into the playlist you wish to be on your iPod/iTouch/iPhone.
    Step 2.
    Return to the music section in iTunes and press "cmd" and "select" at the same time on one of the 'ticks' to unselect all songs.
    Step 3.
    Return to the playlist and press "cmd" and "select" at the same time on one of the 'ticks' to select all songs in the playlist.
    [Note in doing step 2 followed by step 3, only the songs in the playlist are checked in the music section]
    Step 4.
    Return to the music section and sort by checked songs
    Step 5.
    Select all the checked songs and drag them onto the iPod/iTouch/iPhone.
    Step 6.
    Return to the music section in iTunes and press "cmd" and "select" at the same time on one of the 'ticks' to select all songs.
    [Now what you have is only the songs you want on your device and all the songs will show up in the manually added songs section on your device. Also by reclicking all the music in your iTunes library you avoid the unnecessary complications of songs not playing/transferring while listening to music on your computer]
    A bit time consuming but it works well who like to carefully manage their library.

    Hi Chris,
    I will delete this thread and repost with correct terminology to avoid confusion. Also I will include the rationale behind why you would take this approach so that people can choose to see whether they will benefit from it. I'd have liked this to exist prior so I can manage my music statistics.
    Your way is right also, but is not the only way to do it and is certainly not the correct way for me. You don't "manage" your music your way.
    A few simple steps to manually manage your music in your iTunes so that your manually add songs to your iPod (provided the song amount, i.e. the Gb used, is less than the storage capacity of the touch device used).
    Reason: This is a good approach (not the only approach might I add) if you wish for your playcount to be tracked and a failsafe way of managing your songs individually so you do not need to rely on playlists.
    Step 1.
    Create a playlist and drag every song into the playlist you wish to be on your iPod/iTouch/iPhone.
    Step 2.
    Return to the music section in iTunes and press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to unselect all songs.
    Step 3.
    Return to the playlist and press press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to select all songs in the playlist.
    [Note in doing step 2 followed by step 3, only the songs in the playlist are checked in the music section]
    Step 4.
    Return to the music section and sort by checked songs
    Step 5.
    Select all the checked songs and drag them onto the iPod/iTouch/iPhone.
    Step 6.
    Return to the music section in iTunes and press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to select all songs.
    [Now what you have is only the songs you want on your device and all the songs will show up in the manually added songs section on your device. Also by reclicking all the music in your iTunes library you avoid the unnecessary complications of songs not playing/transferring while listening to music on your computer]
    A bit time consuming but it works well who like to carefully manage their library.

  • How to manually add music from your library

    I'm attempting to manually add an album in my library onto my iphone library, but it won't let me.
    On the phone summary it only has "Manually manage videos" and not music, and on the Music tab it only allows me to add voice memos.
    Can anyone suggest what I'm doing wrong?

    Did you follow the steps in this article?
    Managing content manually on iPhone, iPad, and iPod
    Also make sure that no restrictions are set in Settings/General/Restrictions.

  • How to manually add HP C410a Scanner in Mountain Lion?

    I just got a new MBA running Mounta Lion. I'm 100% up to date on Software Update. I've also downloaded and installed the "full featured" HP software for my C410a specifically for Mountain Lion from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=0&prodSeriesId=4059515&prodNameId=4059651&swEnvOID=4142&swLang =8&mode=2&taskId=135&swItem=mp-111985-1
    My C410a is happily connected to my network with an Ethernet wire. I have other computers, both Windows 7 and OSX 10.7 that can print and scan no problem. My new computer, however, can't seem to find the scanner. It had a hard time finding the device as printer too, but when I was in Print & Scan and I clicked on the plus-symbol, I was able to choose "IP" and enter my devices IPv4 and then OSX finally detected what was going on and gave me the proper options to add my C410a. I did a test page and everything - it all works. I can't seem to find how to add this as a scanner, however. ***?
    Halp me, please! How do I add this network enabled scanner?!?!
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03378792 #N541

    Here's a screenshot that may be relevant:

  • How to manually add songs and playlists to ipod with new version of itunes?

    So I didn't have any problem adding songs to my ipod nano manually until I updated itunes a few minutes ago, and found the settings completely different than previously.  I can no longer just drag songs and playlists to my ipod.  I have "manually manage music" and "enable disk use" selected.  I do not want to sync my whole library to it.  I have more songs in my library than can fit on my ipod.  And I already have my playlists set up how I want them.  Can someone help?  

    go to iphone, then on the page below click the Add To... icon on the top right.
    then its easiest to view them by songs. and then you can drag and drop from them and click Done when finished

  • How to manually add responses?

    Can I fill out forms for someone else or add information to response form manually?  My form is for volunteer interest and I want to include info from those who call on  phone.  Looks like it's there but then content gets replaced with red exclamation marks.
    I tried using the "test form" for this but the content does not remain in response form after closing.

    no matter where it is saved on miniSD-card.
    just go to gallery and chose miniSD card and in there the app you want to start.
    it has to be a .jar file
    you can create a PROGRAMM directory for better management

  • How to manually add items from DVD

    I bought an excellent book on PSE 8 fro Mark Galer, and it includes a DVD with tutorials and some extras.  The book was written before Windows 7 came out and the Installer does not work (probably can't recongnise the Program Files (X86) folder).  The author suggests manually installing the extra items.  Does anyone know how to install these .atn, .asl, and .xml files to PSE8??

    XML files usually sit next to the image to which it relates. You can drag them both into pictures or my pictures.
    Actions need to be installed in the Adobe system file and you need an ATN file and a thumbnail PNG file.
    See this thread for more information:
    http://forums.adobe.com/message/3480159#3480159

  • How to a add a resource file in weblogic

    I am creating an ejb project in weblogic workshop 8.1.
    I need to deploy an xml file on the server as part of the appliaction. Can someone tell how this can be deployed on the server. I know I can deploy it if I can bundle it in the jar file, but it's not including it in the jar file even if I include it in the project.

    Yes John.. i am using startNodemanager.sh.
    Is this the change OutFile=$ServerDir/logs/$ServerName.out you are talking about.
    wlscontrol.sh file:
    # Directory and file names
    ServerDir=$DomainDir/servers/$ServerName
    SaltFile=$DomainDir/security/SerializedSystemIni.dat
    OldSaltFile=$DomainDir/SerializedSystemIni.dat
    StateFile=$ServerDir/data/nodemanager/$ServerName.state
    PropsFile=$ServerDir/data/nodemanager/startup.properties
    PidFile=$ServerDir/data/nodemanager/$ServerName.pid
    LockFile=$ServerDir/data/nodemanager/$ServerName.lck
    BootFile=$ServerDir/security/boot.properties
    RelBootFile=servers/$ServerName/security/boot.properties
    NMBootFile=$ServerDir/data/nodemanager/boot.properties
    RelNMBootFile=servers/$ServerName/data/nodemanager/boot.properties
    OutFile=$ServerDir/logs/$ServerName.out
    SetDomainEnvScript=$DomainDir/bin/setDomainEnv.sh
    StartWebLogicScript=$DomainDir/bin/startWebLogic.sh
    MigrationScriptDir=$DomainDir/bin/service_migration
    Thanks,
    Krish

  • How to manually add custom code snippets to Xcode?

    I have a lot of code snippets made for programming. In the past, when I used MS Visual Studio , I could simply add my own snippets , but in Xcode I can't find where to add custom codes.

    See this link.

  • How to manually add a Windows 7 shared printer

    My macair Mac OS X 10.6.7 (10J869). Another computer is windows 7 shared canon inkjet ix4000 printer. The 2 computer all can connect to router via WIFI.
    I have set up follow the procedure refer to http://support.apple.com/kb/HT3049.
    But when i send a document, the printer queue show "Session setup failed: NT_STATUS_INVALID_PARAMETER" and then it on hold (Authentication required). I resume it and select "guest" can not print, type in my login user name and password also can not. Show session setup failed and on hold again.
    have a nice day to you all and hope somebody can help me!

    I had to download the driver for my printer. Depending on the printer you will have to go to that site. In the search engine type 'mac os driver (model printer). I have a dell wireless. After that I went to printers/faxes and hit the + sign and my dell printer was there to add. Hope this helps a bit. I actually just did it today.

Maybe you are looking for