How to manually create layer breaking point for DVD9

Hello, I was wondering if someone could please tell me how I would go about to manually set the layer break point for a DVD9 project that I burned onto 2 DLT tapes. The total size of the DVD is 6.3GB.
I had used the "automatic" setting for burning the DLTs and sent them to a replicator. They came back saying that the layer 0 tape did not allow enough headroom for their Ripguard protection.
I've always used the automatic setting and this is the first time I am asked to manually set it. SO now I need to figure out how I can put a certain amount of data on one DLT tape and the rest on the other DLT.
I am a beginner at this so any help would be greatly appreciated.
Thank you!

Hi Eric,
Unfortunately the information you have regarding RipGuard and the ability to copy RipGuard protected discs is a little outdated.
Can RipGuard be broken? Yes, anything can be broken into, including the DoD Website by 14 yr old chinese students... but that doesn't mean there isn't value in protecting the DVD.
Also, RipGuard is regularly updated, just like Antivirus software, so while older versions of RipGuard can be broken more easily, the latest versions of RipGuard are significantly more difficult to circumvent by existing software.
But again, the point isn't to create the unbreakable 'holy grail' DVD copy protection, but rather to protect something of value.
When you leave your house in the morning, do you close your front door and lock it? Of course you do, but why? So no one will break in. But do you think locking up your house is really going to stop someone from going around to the side of the house and busting out a window if they really want to get in? Of course it wont. If someone wants to break into your house, they will find a way.
Same thing with DVDs. You lock your house because it provides a method of protection, a barrier to make it more difficult and to keep honest people honest. That's what RipGuard, or any copy protection software does.
So the question isn't why would you protect your DVD, but rather why wouldn't you? In most cases if you prevent just a few illegal copies of your DVD from being ripped, it has already more than paid for itself.

Similar Messages

Problem chosing layer break point for multi-movie DL DVD

HI. If you're authoring a DL DVD containing several short movies which can be selected from a menu in any order, how are you supposed to know which order they're burnt to disc in so as to know where the layer break point needs to be? Is media burnt in the order it's added to the project or what? Does it actually matter about choosing a LBP manually so long as DVDSP provides a choice of automatically determined points?

You can use VTS view to see the order they are laid out in
http://dvdstepbystep.com/vts.php
As to manually selecting a layer break, you can if you want to, especially if you know a section is a fade to black (for instance) where it will be less noticeable.
Some background -
There has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size.
What you do is
1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be
2.) Build the project (but not format)
3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.
4.) If the layer break(s) are not where you would like them (in other words a place where they may be more noticable) use VTS view to re-order then go back to step 1.
When you do enough DLs, you start getting a sense based on the size of tracks where things should land

Break point for the particular user

Anybody knows how to set up a break point for the particular user on a particular statement. So I can see this breakpoint on my screen when it happened?

Hi,
If the user ID is USERA then set a breakpoint for USERA as :
BREAK USERA.
Cheers,
Aditya

Break Points for Dual Layer Discs

I've read and re-read the DVDSP4 manual on break-points. They are giving me the hardest time even still. Is there any way to by-pass the muxing process and not have to wait that long to find out if there is the correct balance of space used for each layer on the disc? IOW, is there a way to automatically check if the layers are right without choosing the "auto break point" option?

Hi Drew, when you say set a bunch of markers in the general area, what types of markers are you talking about (ie. chapter, button, dual layer break point)? I can only set one "dual layer break point", should i be able to set more than one? I'm working on this dual layer project and it is driving me nuts!

How to manually create a transport for table T604 update?

Hi Gurus,
I upated table T604 with transaction VEU4 - but at the time if saving it did NOT prompt for a transport request
Now, I have to move the data (updated table ) to quality box / prodcution
Instead of using again trx VEU4 in quality / prodcution boxes, I want o create an empty transport manually and then assign table T604 to that transport and move to next box.
Is that possible ? If so, can sombody explain the steps, please : how to manually create a transport and assign ojbects (table object) to it
Thanks,
SM

Not sure how you have updated T604 in VEU4, but if you go to SM30 transaction with T604 table and click Customization, then it will take you to the place in SPRO where the table is maintained. From there, use the menu Table View -> Transport and create a transport request. Then select the entries you need to transport (all, if necessary) and go to the menu Edit -> Transport -> Include in Request.

Dual Layer Break Points

Ideally, I would like to create my own break point. Using the OTP method, I know that I need to have the 1st layer larger than the second. Can I simply choose a break just over the 1/2 way in my Movie? ie. 1hr32 long for the first layer, 1hr28 long for the second...or does it have to be close to the 3.9Gig mark before changing layers? My break point of choice happens to be the only place that I have a fade to black, that's why it makes it ideal.
I also have several Chapter Markers in the Movie (that don't fade to black)..so if I choose the Auto Break Point option, I don't know how find where the program has chosen to break it at. I want to view before I burn..or atleast know where it is. Is this info in the Build folder somewhere?
Thanks in advance!!!!
Heather
Mac OS X (10.4.2)

when you click on any chapter marker, the property inspector allows you to assign it as a dual layer break point. layer 0 must be larger than layer 1. Also you can place a marker and in the property inspect uncheck chapter marker and check dual layer break point.

HT204053 how can i create multiple icloud accounts for my family members

how can i create multiple icloud accounts for my family members

Thanks... I appreciate the reply. Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)... I had it working before.
Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is... Pop or Imap? What's the outgoing server and the incoming server?
I typically have never had problems setting up mail accounts (in apple mail) with no problem.
Can anyone point me in the right direction?
Thanks in advance!

Dual-layer break point is not cooperating!

I have authored a dual layer disk. I have tagged chapter 18 as the dual-layer break point. In the project chapter 18 is clearly tagged properly, including the little black dot appearing in the proper place on the timeline. But after the disk is burned, which I am having to do using Toast and and external burner, the dual-layer break point is happening on chapter 19. Does anyone know why this would be happening. Thanks in advance for any help you can provide.

As a follow-up to Jake's answer, the reason Toast does its own thing with respect to the dual layer break point is because the .img file that DVDSP saves does not contain any break point information. So, you'd have the same problem with any burning program, not just Toast.
This is on p. 584 of the DVDSP 4.1 manual, if anyone's interested.

Dual Layer Break Point?

So, I found the perfect dual layer break point in my project. I have a 3 hour 58 minute video to put on DVD and set the layer break point at 2 hours 2 minutes. However, when I went to format the disc, it told me that layer 0 was too large.
When using the automatic setting, it told me the same thing.
What is the key to setting a layer break point?

Hi Graiai,
The basic rule is to ensure that layer 0 is larger than layer 1. And obviously to set it at a point where it's not very noticable (especially for those naughty players which take a moment to refocus and have non exitent buffers).
But there are also strict guidlines as to the positioning of the point and also how much larger the second layer is. Jim Taylor's DVD Demystified is a good place to start if you are thinking of doing some serious authoring.
TO overcome your particular problem you need to find another appropriate point closer to the head of the track. I use DVDAfterEdit which takes all the guess work out for this. But for you at this stage it will be a bit of trial and error until you can get a build done.
Let me know if you need more help.

Layer break point without track

hi there,
i have a layer break problem on DSP4..
i have i project contain 804 menu, 0 track and a total size is 8.1GB
for the break point reason, i generate a dummy track , 10 second
black video and create a dual layer break point.
in the vts editor, i put this track on a middle of my structure,
build fine but format say "a suitable marker could not be found"
here's my vts structure... can anybody help about this... thanks
VTS 1 100 MENU 684 MB
VTS 2 60 MENU 738 MB
VTS 3 56 MENU 680 MB
VTS 4 56 MENU 595 MB
VTS 5 56 MENU 557 MB
VTS 6 48 MENU 550 MB
VTS 7 44 MENU 542 MB
VTS 8 DUMMY TRACK WITH LAYER BREAK
VTS 9 52 MENU 560 MB
VTS 10 52 MENU 554 MB
VTS 11 48 MENU 597 MB
VTS 12 48 MENU 462 MB
VTS 13 44 MENU 514 MB
VTS 14 44 MENU 508 MB
VTS 15 96 MENU 714 MB
first 7 vts 4.346 MB (4.3 GB)
last 7 vts 3.909 MB (3.8 GB)

Good God...804 menus must take years to open a project!
You're probably need to move some menus from 7 to 9...you're only 12 mb away from filling the disc. There are other files that need to be compiled too.
Message was edited by: Eric Pautsch1

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How do i create a digital pointer in a presentation?

how do i create a digital pointer in a presentation?

Try OmnidDzzle for free.
http://www.omnigroup.com/products/omnidazzle/features/
or Mouseposé for $4.99 on the Mac App store
http://itunes.apple.com/us/app/mousepose/id405904955?mt=12
I've used both and one or the other should give you what you're looking for at a pretty good price If you have any questions about using either, post back here.

How could I enter a break-point in badi

Hello
How could I enter a break-point in badi. In se24 object type is "IF_PURCHASE_ORDER_ITEM_MM" and Method is "SET_DATA"

Hi,
You need to create an implementation in SE19.
And give the defination name(BADi name) there and Click on interface Tab
Double click on One of the method and write break point there.
break <user name>
and activate the implementation
Follow the Link
[http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm]
In SDN also there are many related threads.
Regards
Sandipan

Dual Layer Break Point problem

Hi,
I just found out after I updated DSP 4 to version 4.0.3 my Layer 1 on every project since updating gets corrupted!
I thought it was the Dual Layer discs I used that caused the problem, but after I re-installed DVD Studio to the original version 4.0.0 the same project worked perfect.
Anyone else have issues with Dual Layer Break Point after updating to 4.0.3?
I have tried different chapters as layerbreak points on my project, and even a test project, with the same result. The finished discs is barely playable on some DVD players, showing wierd interference and noise, and DVD Player on mac crashes when reaching the dual layer break point, and the plant i send the master have a software to check DVDs and they said that it couldnt find/was corrupt Layer 1 on one of my discs. Hope someone can fix this, DSP is the best software otherwise!
Best regards,
Mats.

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

Dual Layer Break Point Q

If I allow DVDSP to automatically set the Dual Layer break Point, is it possible for me ti find where it placed it?
It would probably be pretty obvious in the average project but I am working with a project with about 40 video assets and is very interactive so it jumps around all over the place.

After you build the project and then go to format for DVD-R etc you will see the setting for DL break point (it is set to automatic), but you can then click to see acceptable DL break points (markers).
DVD SP defaults to last acceptable marker that fits on the first layer

How to manually create layer breaking point for DVD9

Similar Messages

Maybe you are looking for