How to manually switch VGA port on?, How to manually switch VGA port on?
I need help to manually switch VGA port on so when I connect PC to TV converter I will get a picture too instead of audio only.
you do that in settings under displays
Similar Messages
-
How can I encrypt my data uplinks between switch trunk ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me as I want to encrypt my switch-to-switch link with Cisco TrustSec.
Hi
Login to switch & go to interface..
There you can give tags.. (ISL & DONT1Q)
Command switch-port mode trunk
Switch-port trunk encapsulation ssl or dot1Q -
Simulation Interface Toolkit - How to toggle a manual switch in simulink from LabVIEW?
I have a manual switch in my simulink diagram that I want to use to switch between to values from my LabVIEW interface. I have tried to connect a toggle switch at LabVIEW`s VI with different parameters in the simulink model(I can choose betweenhow Port Labels, sw, and action), but none of them seem to work properly.
The manual switch in Simulink gets to inputs, one output. There is also an Environment Cotroller that output the simulation(SIM) or Real-Time Workshop(RTW) port depending on the current environment.
At this time I am doing simulations and are not using Real-Time Workshop.
I want to thank you for your help in advance.
-MariHi
Kotsya,
Thank you for posting to the National Instruments Discussion
Forums.
If you are not using the Math Interface Toolkit, you may be
interested in using the MATLAB® Script Node. This allows
you to call MATLAB® commands using ActiveX and I you
can call your Simulink model from MATLAB® that way.
Here are some resources on how you can do this:
MATLAB® Script Node LabVIEW 8.2
Help
How Can I Resolve MATLAB® script node and
Xmath Script Node Issues in LabVIEW?
Hope this helps!
Abhinav T.
Applications Engineering
National Instruments India
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx
Measurement Fundamentals -
I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?
Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro. -
How to set up use of DVI port to external VGA monitor
How do I set up a powerpoint on an external screen using the DVI port to VGA. To make the powerpoint show on the computer screen as well as the external screen, what do I need to do on the MacBook Pro?
Any idea ?
-
I have an old monitor with VGA port, and was wondering if anyone knows how to connect this to the new mac mini. Older mac minis have the mini display port, and if that were the case I would use the mini display port to VGA adapter, but this new mac mini doesn't have one. It just has the thunderbolt port or HDMI port for displays... I've been looking for an adapter to connect my display to one of these but cannot seem to figure it out. Any advice? Thanks in advance.
The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
Regards. -
How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?
How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?
Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682) -
How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.
What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors. -
Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
ThanksI originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.
-
I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.
Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.
Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ???? -
How to get Port Classifications for Logical Switch via scvmm console
Hello All,
We are creating some automation tool based on SCVMM console scripts.
In order to create vm we need to assign port classification based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?I think you are looking for
Get-SCVirtualNetworkAdapterPortProfileSet.
This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks. -
I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?
Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
On the basis of the specifications you have given for your set up, mirroring should work. -
How to get Networking Switch Port Configuration (I guess SNMP4j will help)
Greetings :)
We have extreme Summit 450e switches installed in our organization. approximately 2000 desktops are connected to these switches.
Now, I want to make a utility to get info from these switches, for example, which IP, MAC etc is running on a particular switch port. I want to extract these kind of info from all switches and export it into a database.
Any help, how to start this work.
Thanks...> Any help, how to start this work.
First research what programmable interfaces it supports. That includes any management API including SNMP, TCP and HTTP.
And then from that figure out what you want to do with it.
After you do both of the above then you start looking to java to program the solution. -
How do i switch from automatic to manual download of songs to my iPad from my iTunes library
how do i switch from automatic to manual download of my songs to my ipad in my itunes library
You can still manually add songs to the iPad even if the option is not set. Just drag them to iPad same way as when the option is set.
Select the iPad, click the Summary tab and tick Manually manage music and videos.
Maybe you are looking for
-
Replacement for QSIMG, AU015 and XEDT in payroll schema Q000 in ERP 6.0
Hi SAP Gurus, I am involved in SAP HR upgrade from R/3 4.6c to ERP 6.0 for country AU. Now, there are three functions - namely QSIMG, AU015 & XEDT - that have become obsolete in payroll schema Q000 in ERP 6.0. Can anyone please let me know what are t
-
Why are my words going together when I convert a letter from PDF to Word?
When I convert a letter from PDF to Word all the words go together. e.g Thedogranafterthecat. I would really appreciate some guidence. Thank you
-
How to make the video looks greenish ?
Hi there, Can I know how to make a video looks bit greenish ? Thanks
-
Thunderbolt SIM card issues??
I was having internet connection issues with my thunderbolt and they sent me out another SIM card and did a master reset. I put the SIM card in restarted it and I turned it back on and it has a pickture of a SIM card with an explanation mark and it w
-
How do I get rid of background color in a table?
I insert a table and it shows up with a blue background. The properties panel shows no background selected. I changed it to a white background but nothing happened. I made a new class named tableformat, it took all the styles I applied to the clas