How to manually zoom in using the Ken Burns effect

I love the way the Ken Burns effect zooms in on a photo. But it isn't optimally positioned on my photo. So I want to manually control this effect from start to finish of the duration. I understand how to slide left, right, top or down but its not obvious how to make it zoom in or out from start to finish. Can someone tell me how to do this.
Thanks in advance.
--Mickey

pick the photo in the slide show - click on the settings icon in the tool bar and on this slide - click on start next to Ken Burns at the bottom of the settings window and zoom the photo to the desired size using the zoom in the lower right hand corner and pan to the desired starting point by dragging - click end and do the same for the final position and you have it
LN

Similar Messages

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

How do you pan and/zoom an image--the "Ken Burns" effect?

How do you pan and/zoom an image--the "Ken Burns" effect?

Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Using the Ken Burns effect in I Photo 5

The first time I worked on a slide show I was able to use the Ken Burns effect with no problems. Later on opening I Photo and clicking on slide show I no longer have the controls for the Ken Burns effect. There is just a blank space where they should be. Why did this happen ? How do I get the controls back?
Any suggestions would be appreciated. Thanks, Vernon

Vernon:
Welcome to the Apple Discussions. What may have happened is that one or more items within the iPhoto application package have had their permissions changed so you do not have access. Run Disk Utility and repair disk permissions. If that doesn't help try moving the application to the desktop and making a duplicate of it-select it and type Command-D. Now move the duplicated to the applications folder and rename to just iPhoto. Now see if the KB controls come back.
Next would be a reinstallation of iPhoto. You'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Now reinstall iPhoto 5 and immediately update to the latest version. Then repair disk permissions.
Hope this has been of some help. Good luck.
OT

Stills using the Ken Burns effects are bad quality

The high quality still I'm inserting into the timeline using the Ken Burns effects are bad quality. Do you know why? I don't have that problem in iMovie.

Yes, I have rendered it (I think). Not sure how to do that and don't know how to get the "complete specs" of the still image and project.

When i create a slideshow in iphoto using the ken burns effect it will not work in idvd. any tips please.

when i create a slideshow in iphoto with the ken burns effect it works fine. when i then transfer it to idvd it will not work. any tips please.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
how are you getting the slideshow into iDVD?
what size slideshow did you send to iDVD?
can you export the slideshow to the Desktop and play it with Quicktime Player there?
what fixes have you tried?
how much free space on your boot drive?
Here's how you should create and sent a slideshow to iDVD from iPhoto:
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

How do I get rid of the Ken Burns effect on my photos

I would like to get rid of the Ken Burns effect on my photos I addes to my video. How do I do that

When you create a New Project and give it a name, the next thing you should always do is go to File>Project Properties and make sure in 'Initial Photo Placement you have selected either Fit or Crop. It seems the default setting is the Ken Burns annoyance.

How do I get the Ken Burns Effect?

How in FCE do I achieve the Ken Burns effect which I used a lot in iMovie '08?

Hello Piero,
Thank-you for your contribution. Your plug-in comes in very handy as I have decided to drop producing slideshows using iPhoto after it lost my slide show project. So many hours of work down the drain!
Anyhow, here I am looking for the quickest way to get similar results using FCE and I find your plugin. As I am getting familiar with FCE I want ahead with a trial of your plugin. My only question at this stage is what could cause the pf folder not to show up in the Video generators? The pf folder does show in the Video filters but not the Genrator filter.
I did follow your instructions with care at:
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/PluginsInstallation.html
but still cannot figure out the cause.
Thanks for your help,
JM

How come sometimes the Ken Burns effect allows you to edit the entire picture, and other times it automatically starts at a smaller section of the photo?

How come, in imovie, when adding the Ken Burns effect to a still photo, sometimes the phoo appears as the full size, and other times, the green and red ken burns boxes appear only on a smaller portion of the picture? I want to be able to Ken Burns a bigger chunk of a picture, but often times it is as if there is a pre-set for just how much the Ken Burns will cover.

Is it possible that the ones that have small boxes are in Portrait while the ones with large boxes are in Landscape?
If so, you can get bigger boxes on the Portrait ones by clicking "Allow Black" in iMovie 11. (iMovie 09 did not have this feature.)

Importing photos & I dont want the ken burns effect

I want to import photos into imovie to make a slideshow like I used to in earlier versions of. However, when I import a photo now, it imports somewhat zoomed in and off center.
I do not use the Ken Burns effect, so it is not on.
Also I am doing a straight import from the folder. If I try this from iphoto the ken burns effect is turned off and I still have this problem.
Has anyone else experienced this with the new version of imovie?

Although it looks like a bug, Randy, it's actually not. It's how Ken Burns works in all versions of iMovie.
The Ken Burns checkbox ONLY controls whether or not the image is imported with an animated zoom or pan. The OTHER Ken Burns settings — the duration, the zoom and the pan — are ALWAYS in effect. Those settings affect the current import. And future imports too, until you change them.
If your image imports off center it's because the Ken Burns pan setting is currently set off center. To re-center it, turn ON the Ken Burns checkbox. Stop the preview. Click on the "Start" side of the Start/End thingy. Drag the zoom slider a bit to the right, then all the way left. Repeat for the End side of the thingy. Now the image is centered, and the zoom set to 1.00. Click Apply, so it sticks.
Notice you can drag the preview image off center. That's probably how it got changed in the first place. Usually one uses the zoom and pan in combination to crop an image. To show just the left side of the image, for example.
Karl

Constant Crashes when I try to manipulate the Ken Burns Effect

Im trying to edit a slideshow where Im using the Ken Burns effect.
When I try to set the position of the photo at the start or end of the move, iPhoto usually crashes.
It will only let me alter the Zoom amount.
It cant seem to handle a repositioning.
What is the deal?!
It is supposed to be able to do this.
Is this because the newest iPhoto is beyond the specs of my G5 tower?
I have to make 2 adjustments then quit just to save my minor changes or else all is lost when I crash.
BUMMER.

There have been reports of issues with video cards from older machines and iPhoto 09.
Are all the Slideshow options available on your machine?
Post the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here.
Regards
TD

Having the Ken Burns effect off (by default)

When I select pictures for a diaporama, the Ken Burns effect is always checked in the "settings" window.
Is it possible to avoid that ? (I very rarely want to use the Ken Burns effect, and have to select the "settings" windows and un-check it each time).
Thanks for your help.

I actually gave that info to another poster and they told me it didn't work.
One person said it did, so I guess your milage may vary.
http://discussions.apple.com/thread.jspa?messageID=950794&#950794

Problems with seeing photos while working on the Ken Burns Effect

I am having difficulty seeing my photos when I use the Ken Burns Effect. All I get is a black screen. It won't let me adjust anything on the photos because the screen is black. Please Help

So I have kind of the same issue here but it is slightly different. I tried all of the tricks that have been posted here but I am getting the black screen on brand new pictures that are imported both with and without the ken burns effect on them. I don't seem to have the problems on pictures that are already in the video with/without the KB effect.
I have also tried to do it under another user account, downgraded iMovie HD 6 from 6.0.3 down to 6.0 and 6.0.2 and nothing seems to help. I have even removed the plists on both ~/Library/Preferences/com.apple.iMovie.plist along with anything in /Library/Preferences having to do with iMovie without any success. The only solution that I am resorting to is to just use a different computer all together or format the drive on my computer.
Any solutions? I have a video that needs to be down by the end of next week...

Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

Hello MisfitxCaleb
Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

How do you turn off the Ken Burns effect?

I have students who are using iMovie to create animations. We can't get iMovie to NOT apply the Ken Burns effect to the still images they are making and importing. How do we turn this "feature" off?

Are you talking about iMovie for iOS?
I will assume you are as this is the iOS forum.
You cannot turn this off.
iMovie iOS is not the app you should use to make animations.
I suggest you have a look in the AppStore for a better app, there are a few that are better suited to make video from still frames.
Better yet do it on a computer, you will have many more options.
But again iMovie Mac is not the best app to do this.
QuickTime Pro actually has better importing of image sequences the iMovie.

How to manually zoom in using the Ken Burns effect

Similar Messages

Maybe you are looking for