How to Manupilate serach help view results

Hi,
I need to enable division specific restriction in the" product search help result" view. ( currently displaying all divisions products )
End user should get only his division specific products in the search results, which he enters in the "organizational data" in the opportunity screen.
How can i achieve this, Please guide.
UI component : PRD01QR
View : PRD01QR/SearchHelpResult
Thanks,
Bhanu

Try to use the code in EH_ON_SORT or try to use SET_FILTER method in context class .
check below code as well
me->typed_context->ppritemprod->set_filter( EXPORTING iv_attr_name = 'TYPE' iv_value = '1' iv_filter_mode = if_bol_bo_col_iterator=>filter_mode_interactive )."#EC NOTEXT
Edited by: Shobhit Srivastava on Dec 6, 2011 3:13 PM

Similar Messages

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

How to create Serach help in SRM?

Hi all,
Can you please guide me how to create a search help in SRM?
I would like to display seach help for the custom field on SRM Portal.
Which are the steps / procedure to display search help in SRM Portal?
Thanks in advance.
Regards,
Hemant

Hi Hemant,
Hope this link may help you Adjusting SRM searchhelp using BBP_F4_READ_ON_ENTRY / BBP_F4_READ_ON_EXIT?
Regards,
Pravin

Regarding creation Of Help View

Hi , Can Any body Tell me what is the step by Step Procedure how to create the Help View. Plz it's urgent .
Thanks&Regards .
Nihar.

Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Reward points for useful Answers

Can't open .help document with OS X Help Viewer

My Canon scanner's on-screen documentation is only available as a .help file. Howerver, by default this file is opened with "DVD Studio Pro" on my Mac. Very strange. No other app is available under the .help file's "Get Info". I cannot pick OS X's Help Viewer. Since it's no app any more, it can't be selected or even found for that matter.
*So how do I get Help Viewer to open up this .help document?* Control-clicking also doesn't give me that option.

Thanks. Now that I know where to find it, I could change it in "get info". Problem solved.

Maintanence and Help Views!!!!!!

Hello folks,
I have 2 requirements here.
1. I have to create a maintanence view over two tables. For example, I have a table zmara as master data table with material field and zmakt as a material description table. Now I have to create a maintanence view on top of these two tables. If I make an entry for a new material in this view the two tables should be updated.
Can anybody tell me how to do that??
2. How to create a help view??
Points for sure will be rewarded.
Thanks

Naren,
Use SE11 abd choose VIEW Option.
Give View, a Name and choose CREATE.
A small screen with the options
     1. Database View
     2. Projection view
     3. Maintenance View
     4. Help view
   will be displayed.
Choose the required option (either Maintenance View
   or Help view).
And proceed with givening base tables and Join Fileds and View Fields.
Thanks
Kam

How to create a serach help

Hi Guys
Could you please explain me in detail the steps involved in
creating a dsearch help
Thanks in advance

1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Other Options
Assign a hot key: If the search help is to be accessed with a hot key, you must enter a one-place ID in the Hot key field. All the elementary search helps contained in a collective search help should have different short cuts.
Assign a search help exit: In exceptions, you might have to change the standard flow defined by the search help with a search help exit. In this case enter the name of the search help exit in the corresponding field.
Test the search help: You can test the flow of an input help defined by the elementary search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with .
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee5f446011d189700000e8322d00/content.htm

How to create help view

hai,
how to create help view

Views
Importance/Use of Views
Data for an application object is often distributed on several database tables. Database systems therefore provide you with a way of defining application-specific views on the data contained in several tables. These are called views.
Data from several tables can be combined in a meaningful way using a view (join). You can also hide information that is of no interest to you (projection) or only display those data records that satisfy certain conditions (selection).
A view is a logical view on one or more tables, that is, a view is not actually physically stored, instead being derived from one or more other tables.
The data of a view can be displayed exactly like the data of a table in the extended table maintenance.
Join, Projection and Selection
CROSS PRODUCT
Given two tables TABA and TABB. Table TABA has 2 entries and table TABB has 4 entries
Each record of TABA is first combined with each record of TABB. If a join condition is not defined, the cross product of tables TABA and TABB is displayed with the view.
Join condition
A join condition describes how the records of the two tables are connected.
Inner Join and Outer Join
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view.
With an outer join, records are also selected for which there is no entry in some of the tables used in the view. (ABAP allows left outer join.)
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
Projection
Sometimes some of the fields of the tables involved in a view are not of interest. The set of fields used in the view can be defined explicitly (projection). In our example, Field 4 is of no interest and can be hidden.
We specify the fields which we need to show in our view by including them under the view flds tab when creating a view in the dictionary.
+Selection Conditions+
Selection conditions that are used as a filter can be defined for a view.
Specifying these conditions under the Selection conditions tab when creating a view in the dictionary would have an effect which is similar to specifying a where clause when writing a select query to restrict data.
View Types
Four different view types are supported. These differ in the way in which the view is implemented and in the methods permitted for accessing the view data .
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Help views can be used as selection method in Search help.
Maintenance views permit you to maintain the data distributed on several tables for one application object at one time.
Database Views
Database views should be created if want to select logically connected data from different tables simultaneously.
Database views implement an inner join.
Application programs can access the data of a database view using the database interface. (Just as we write select queries on database tables, we can write them for views as well.)
Includes in Database Views
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields).
To include one of the tables in the view, enter character * in field View field, the name of the table to be included in field Table and character * again in field Field name on the View fields tab page of the maintenance screen of the view.
You can also exclude individual fields of an included table. If you do not want to include a field of the included table in the view, enter - in field View field, the name of the included table in field Table and the name of the field to be excluded in field Field name.
Inserts with Database Views
If a database view contains only one single table, data can be inserted in this table with the view .
You have the following options for the contents of the table fields not contained in the view:
If the field is defined on the database with NOT NULL as initial value, the field is filled with the corresponding initial value.
If the field is defined on the database as NOT NULL without initial value, an insert is not possible. This results in a database error.
If the field is not defined on the database as NOT NULL, there will be a NULL value in this field.
Projection Views
Projection views are used to hide fields of a table. This can minimize interfaces; for example when you access the database, you only read and write the field contents actually needed
For the above diagram, fields F3 and F4 are irrelevant, and therefore hidden from the projection view of the table.
Maintenance Views
A maintenance view permits you to maintain the data of an application object together.
The maintenance status determines which accesses to the data of the underlying tables are possible with the maintenance view.
Maintenance Status
The maintenance status of a view controls whether data records can also be changed or inserted in the tables contained in the view.
The maintenance status can be defined as follows:
Read only: Data can only be read through the view.
Read, change, delete, insert: Data of the tables contained in the view can be
changed, deleted, and inserted through the view.
Read and change: Existing view entries can be changed. However, records
cannot be deleted or inserted.
Read and change (time-dependent views): Only entries whose non-time
dependent part of the key is the same as that of existing entries may be
inserted.
Help Views
Help view is created if a view with outer join is needed as selection method of a search help.
Help views are used exclusively for search helps.
A conventional database view selects data from the database using an inner join.
For a help view however, data is selected using a left outer join.
Eg-> Suppose table SCARR (Airline master table) has AA American airlines
AB Air Berlin
AC- Air Canada as three entries.
Table SPFLI (Flight schedule) has entries corresponding only to airlines AA (American airlines) and AB (Air Berlin).
Now if a database view were to be used as a selection method for a search help for airlines, we would only get AA and AB as possible entries because the database view implements an inner join.If however, we were to use a help view as the selection method here, we would get AA,AB and AC as possible entries because a help view would implement a left outer join.
Restrictions for Maintenance and Help Views
There are some restrictions for selecting the secondary tables of a maintenance view or help view. The secondary tables have to be in an N:1 dependency to the primary table or directly preceding secondary table. This ensures that there is at most one dependent record in each of the secondary tables for a data record in the primary table.
Append Views
Append views are used for enhancements of database views of the SAP standard.
With an append view, fields of the base tables of the view can be included in the view without modifications. This is analogous to enhancing a table with an append structure.
An append view is assigned to exactly one database view. More than one append view can be created for a database view.
The append technique described can only be used for database views. With an append view, only new fields from the base tables contained in the view can be inserted in the view. You cannot insert new tables in the view or modify the join conditions or selection conditions of the view.
Check out the below related threads
Views
views

Rh10 - HTML Help - linking to pdf shows when generate CHM and 'view results' but not when double-click on CHM in project folder or in product help

I have several PDFs in Baggage Files that are linked to topics in the Table of Contents. When I generate the CHM file and 'View Results' I am able to pull up/access the PDFs with no problem. When I go into the project folder and just double-click on the CHM file, I cannot pull up/access any of the PDFs nor can I access them in the product help. Any ideas? Is a setting "off" somewhere in my project?
I am using RoboHelp 10.
Thanks!

eeddings wrote:
Thanks for the idea, but I can't switch the project to WebHelp. This .chm project consists of a master project with 18 slave projects and a slew of remote jumps. I'd have to recreate all of the remote jumps if I switch to WebHelp.
Hopefully Adobe can fix this issue.
Well, first off, even though it would be WebHelp, it would be inside a CHM container. So for all intents and purposes it would be a CHM file. But having said that, I'm not sure there is a way to merge these hybrid types of CHM files.
If your statement about Adobe fixing the issue is meaning that they can either remove the Print icon from the CHM Viewer, I wouldn't hold my breath because as I said, that's in Microsoft's lap and they haven't updated the CHM viewer in a long while. Doubtful they ever will.
The only hope would then be for Adobe to update the code used for the Mini TOC. The only way that will happen is if enough folks submit this as a bug via the following link:
http://www.adobe.com/go/wish
Until that would happen, your likely best bet is to simply avoid using the Mini-TOC feature or just insert a warning that if the topic is printed, it will cause issues. Or, you could use bookmarks and links to establish your own verision of a "Mini-TOC"
Cheers... Rick

How to use Help View 2 in standalone Winform app similar to VS Package Help2 from DTE2

Hello,
We are successfully obtaining a DTE2 object and then the Help2 object to connect our context id names with triggering the Help Viewer 2 in a VS package but can’t seem to do the same outside of VS.
Here’s a sample of how we handle getting it okay from the VS package code:
dte2 = Package.GetGlobalService(typeof(DTE)) as DTE2;
help2 = (Help2) dte2.GetObject("Help2");
Then we can set out context id like this:
helpId = “MYFORMCONTEXTIDHERE”;
help2.DisplayTopicFromF1Keyword(helpId);
Within VS this works fine for our package. However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
Given all this…and us not wanting to use the older CHM HelpProvider winforms approach, is there any way we can achieve what the package version is doing in a pure Winforms application?
Thanks,
Michael

Hi Michael,
Thank you for posting in the MSDN forum.
Based on your description, I’m afraid that it is not the correct forum for this issue, since this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To help you find more useful information or find the correct forum for this issue, would you mind letting us know more information about it?
It is the WinForm developing issue, am I right?
You said that you use the DTE 2 object, is it related to the VS extension?
>> However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
I did some research about it, the following case and document shared some information about the “Get References to the DTE and DTE2 Objects”, it seems that it also shares some information about “Get an instance of the currently running
Visual Studio IDE” like the code here:
// Get an instance of the currently running Visual Studio IDE.
EnvDTE80.DTE2 dte2;
dte2 = (EnvDTE80.DTE2)System.Runtime.InteropServices.Marshal.
GetActiveObject("VisualStudio.DTE.11.0");
Reference:
http://msdn.microsoft.com/en-us/library/vstudio/68shb4dw(v=vs.110).aspx
Another case:
http://stackoverflow.com/questions/21986644/use-addin-project-in-another-application
If still no help, I might not have the correct detailed answer you need, but I might lead you into the right direction to solve your problem.
If it is the WinForm developing issue, you could select the correct forum here:
https://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winformsdesigner%2Cwinforms%2Cwinformsdatacontrols&filter=alltypes&sort=lastpostdesc
If it is related to the VS extension, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsx
If I have misunderstood this issue, please feel free to let me know, I will help you find the correct forum for this issue as soon as possible.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

How to set filters to a Result view

Hi All,
   How to set filters to a result view in web UI.
Thanks & Regards
Nitish.

Hi Nitish Kumar,
if you want to sort the table fields like ascending , Descending create one event ex: eh_on_sorting.
in that get the event using thtmlb_event. then check whether sorting is necessary or not.
then get the name of column to be sort by using tableview->column_key.
based on that arrange the field ascending or descending using tableview->column_sort_directin.
ascending or descending.
then sort the collection using collection_wrappor->sort( lv_attrname .. etc).
here is the sample code..
data: lv_bo               type ref to if_bol_bo_property_access,
         lv_thtmlb_tableview type ref to cl_thtmlb_table_view,
         lv_attr_name        type name_komp,
         lv_sort_order       type char1,
         lv_stable           type abap_bool value abap_false.
   try.
       lv_thtmlb_tableview ?= iv_htmlb_event_ex.
     catch cx_sy_move_cast_error.
       exit.
   endtry.
   if lv_thtmlb_tableview is bound.
*   check whether its realy a sorting event
     check lv_thtmlb_tableview->event_type = cl_thtmlb_table_view=>co_header_click.
*   get name of column to be sorted
     lv_attr_name = lv_thtmlb_tableview->column_key.
     check lv_attr_name is not initial.
*   get sorting direction
     case lv_thtmlb_tableview->column_sort_direction.
       when 'U'.
         lv_sort_order = cl_bsp_wd_collection_wrapper=>sort_ascending.
       when 'D'.
         lv_sort_order = cl_bsp_wd_collection_wrapper=>sort_descending.
       when others.
         return.
     endcase.
*   sort
     try.
         me->collection_wrapper->sort( iv_attr_name     = lv_attr_name
                                       iv_sort_order    = lv_sort_order
                                       iv_stable        = lv_stable
*                                  IV_SORT_CALLBACK =
       catch cx_crm_cic_parameter_error.
*     could be a renamed attribute or field which does not belong to the collection
     endtry.
*   in case of single selection restore the selected row index
     if   me->selection_mode = selmode_single
       or me->selection_mode = selmode_lineedit.
       if me->selected_index <> '0'.
         me->selected_index = me->collection_wrapper->get_current_index( ).
       endif.
     endif.
   else.
     exit.
   endif.
Thanks & Regards,
Srinivask

How we can use help & maintain view in program

hi Gurus,
how we can use help & maintain view in program?
is it able to use in program?
thanks in advance,
Regards,
Arun.

Hi
maintain view can be used in program using the function module 'VIEW_GET_DATA'.
and help view is for search help.
check this link below.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecd2446011d189700000e8322d00/content.htm]
Regards,
Sakthi.

How to create Maintaince View and Help View

Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
Kumar

FOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.

HELP...I can't reset default views...how do I set "designer view" to default that shipped with product.

Help...how do I reset "Designer View" to what shipped with product. I was using a tutorial and totally messed up the designer default view, and cannot restore it by going to workspace "Designer View" reset...it just resets it to the same corrupted view. I seem to be stuck in live mode with no buttons to come out of live mode.

While in the Designer space, have you tried choosing Windows > Workspace Layouts > Reset 'Designer' ? If that doesn't work, you may have accidentally overwritten the default Designer workspace with the one you see now. If that's the case, one (pretty drastic) alternative is to reinstall. Another less drastic approach, is to replace the Designer.xml in your user Configuration > Workspace folder with the one I've attached.
Let me know if you need help finding your user Configuration folder.
Best - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

How to Manupilate serach help view results

Similar Messages

Maybe you are looking for