How to map 0LOGSYS and 0SOURSYSTEM

Hi all
I want to upload master data for Profit center
Activated the business content and the 0PROFIT_CTR info source contains 0LOGSYS and 0SOURSYSTEM additionally.
So when I assign the data source 0PROFIT_CTR_ATTR which contains the feilds namely DATEFROM , DATETO, KOKRS, PRCTR, VERAK, WAERS.
The data source doesnt have any related fields for 0LOGSYS and 0SOURSYSTEM so my tranfer rules are partially maintained
So i assigned a constant to 0SOURSYSTEM (The source system id with F4 help) and shall i ignore the 0LOGSYS ??
or what value should it be assigned
Thanks a lot
Regards
Naveen

Hi Naveen,
You can ignore the 0LOGSYS and leave it un-mapped (if you have the situation as follows): As per SAP 0LOGSYS is used if more than one Source System is grouped to one Source System ID. 0SOURCESYSTEM denotes 1:1 mapping of Source System and Source System ID.
Hope this helps...

Similar Messages

How to map lattitude and longitude on a map in j2me.

hi all,
i am new to this forum and new to j2me.
i am developing a pplication to track location of a gps mobile phone.
i am using wtk2.5.1 jsr179 to develop it
i know how to get location of a mobile phone but i cant find any method how to map those lat long coordinates on a map...
please help me out if anyone knows about it..
thanx

Hi,
I'm afraid that this is large problem... and it's not related to J2ME.
The first question is whether you want to use some map provider and its API or you have a bitmap and you want to place a cursor of your position in the map.
In the first case find an API to use (I don't know any). In the second case you have to understand what the GPS coordination mean, know projection type of the used map, then find and use the transformation formulas to transform GPS coordinates to map coordinates and vice versa.
Regarding the GPS coordinates start here: http://en.wikipedia.org/wiki/World_Geodetic_System
Regarding the projections - my map I tried to use in my application uses Lambert conic conformal projection http://en.wikipedia.org/wiki/Lambert_conformal_conic_projection
but it may differ from map to map.
Enjoy :-)
Rada

Re: How ro map Version and Cuirrency dimension or Custom dimensions in ERPI

Hi All,
I didn't want to open a new thread since I am running into a similar issue. If anyone thinks that I should open a new thread, I will do that.
I have setup the ERPi and my target application is a planning app. I have setup the data rule mapping for all the dimensions but it doesn't show me the Currency dimension. The EBS data pulls Functional Currency USD, but I want to load it to Local. When I run the data load, I can see the data in TDATASEG table in EPM_ERPI schema but I don't see the data in my Essbase cube. If someone can breifly explain how is this all connected, that would be great.
- If FDM is selected in ERPi, how does ERPi know which location in FDM to load to.
- If data load is successfull from ERPi, how do I validate the data in FDM or ESSBASE. I don't see the data in FDM and data is not there in Essbase.
- How does ERPi load data to Essbase database, which is through a Planning app since I don't see a Essbase connection in ODI.
- Are there any logs in ERPi that I can check which would show me the errors or data load success.
Thanks a lot

Hi,
Can anyone help reply to my query.
thanks in advance..

How to map 0pa_c01 and 0pp_c03

Dear All,
Pls. guide me up for HR-PP mapping.
Scenario : I need to calculate employees per ton and thus need the employee count from HR and finished qty from PP.
Any way to do so.?
Regards,
Prasun.

You may try with capacity utilization
ok
Rewards points

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

How Do RoboHelp 9 WebHelp Generated Files Handle Map IDs and Aliases?

The text below was written by our team's developer/architect. I am the help author who uses RoboHelp to write content and generate the help files, but I am clueless how it all gets generated and is deployed. Please help. We use RoboHelp 9. I use it in Windows XP and our app and help run on IE 7, 9, and Firefox (multiple versions).
"Our application uses the numeric identifiers associated with the Map ID. For example, to get to the <appname>_home_page.htm file, we use the number 1053. <appname> = pecs, in this example.
All of this is used in a call to a RoboHelp method defined in the RoboHelp_CSH.js file. The mehtod we are calling is the RH_ShowHelp() JavaScript method and the code to perform the call, when you click on Page Help, is this:
RH_ShowHelp(0, ''/pecsHelp/index.htm>pecsHelp',HH_HELP_CONTEXT,topic);
Topic is translated to the Map ID number for the page help. HH_HELP_CONTEXT is defined in the RoboHelp_CSH.js file. This method translates into a URL and from what I have seen, the URL that gets generated is this:
http://{server}[:port]/pecsHelp/index.htm/{server}[:port]/pecsHelp/index.htm#<id=1053>>pecsHelp
Server and port get replaced with the appropriate values. I have no clue how id=1053 is supposed to get translated to mean "pecs_home_page.htm". If you check the PECS_help.h file, you will see the following entry:
#define PECS_Home_Page1 1053
Then in the RoboHelp alias file (PECS 3.0.ali), the following line is in the file:
<alias name="PECS_Home_Page1" link="pecs_home_page.htm"> </alias>
But both of these files are used during the WebHelp generation process and I don't know how the WebHelp generated files handle the Map ID and aliases."

You need to assign the numbers you find in the pecs_help.h file to topics in your help. You do this in Context Sensitive Help > Map Files > All Map IDs. (From RH7, but I assume the location is similar in RH9.) This creates the entries in the .ali file.
Peter Grainge suggests a couple of sites to read for a greater understanding here:
http://www.grainge.org/pages/authoring/calling_webhelp/using_map_ids.htm
(Although the second site is based on RH X5, the basic concepts and procedures should be very similar. )
HTH,
Amber

How do I search and work in the map module without losing my selection

I'm going through my old photographs that predate geotracking and adding my best guess as to their locations via the map module but I'm getting frustrated.
My biggest angst is the selections. In the library module, I look around and find a set of photographs that were taken at the same place and I select them. I then go to the map module and move found, sometimes search, for the place where the photographs were taken. Now, I go back to drop the selection into the map and ... OH NO!!! .. there is no selection. Double angst is I click back in Library and I'm scrolled all the way to the start of my group of photographs.
Deselecting the photos is the biggest UI mistake that Lightroom is making in this sequence. I'm wondering if there is something that I can do to either prevent it or perhaps have a second method of a quick temporary group of photographs.
The other related question I have is if anyone has a suggestion of how to mark these photos as the type of GPS information. e.g. it could come from the camera, it could come via a track log, or it could be just my best guess. Perhaps that is already possible to determine.

When you find the photos you want that were taken in a single location, select them and put them in a Quick Collection (press B)
Then select the Quick Collection and go to the Map Module with the filmstrip turned on. You will then be able to work ONLY with this set of photos that are taken in one location

How to map business process and enterprise service?

Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- People Productivity as the word itself describes...it's about portals and productivity.
- Embedded Analytics has to integrate transactional and analytical content.
- Service Composition is used for model-driven service composition and services orchestration.
- Service Enablement is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- Business Process Platform is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- Life-Cycle Management has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of Business Process Platform BPM is providing the choreography for core business preocesses.
At Service Enablement BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is Service Composition because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff

How to map values between Contract and Purchase Order...

Hi friends,
We are using SRM 5.0 (ECS). I am facing a problem with Purchase Order.
. I am creating Contract locally through Live Auction. After that I am creating Purchase Order through Live Auction. So in Purchase Order Quantity, Net Price, Gross Price, and Long Text etc. not coming which is defined in Contract. PO capturing the values from Live Auction, means no relation between the Contract and Purchase Order. After making Contract again I have to changes in the Purchase Order.
So how to map the values from Contract to PO in SRM? I want to map between contract and Purchase Order like R/3. At the time of creation of PO ( in R/3 ) we can adopt the Contract so all the relevant values comes from Contract to PO. In SRM how will I do?
Please suggest me.

When you create PO and a contract from a Live Auciton, they will not be mapped.
While creating a PO (BBP_POC - Process Purchase Order); in the PO line item assign the contract and item reference. Only then they will be linked.
Hope this helps.
Regards
Kathirvel

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

How comples return types and parameters are mapped

Hi all!
I want to know how complex return types and parameters in a java interface gets mapped to wsdl? for example how would the wsdl for the following interface shall look like:
interface ComplexReturns{
   java.util.Date getLuckyDate(java.util.Date DoB);
   myPack.MyClass getMyClass();
}

Hi,
- In your application module, make a public method that returns an arry, for example an arry of strings[]
    public String[] returnTwoVals(){
        String[] returnvals = {"1","2"};
        return returnvals;
    }- expose this method in the application module
- in the user interface drag/drop the returnTwoVals method on a page and choose to create a button.
- double click the button to generate the binding code
    public String commandButton_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding =
            bindings.getOperationBinding("returnTwoVals");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    }- you can access the values in the arry by adding this code after the Object result =...
   String[] vals = (String[])result;
   System.out.println(vals[0] + " - " + vals[1]);

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

How to create the maps externally and import in to PI

Hello Gurus,
Please let me know how to create the maps externally and import into PI
Regards
shankar

Hi,
Hope these links could help you understand XSLT, JAVA nad ABAP mappings.
[http://www.riyaz.net/blog/beginners-guide-to-xslt-mapping-in-sap-pi/technology/sap/769/]
[http://www.dataxstream.com/2009/09/allow-additional-mapping-types/]
[http://www.riyaz.net/blog/sap-pi-abap-mapping-simplified/technology/sap/837/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3ARiyaznetBlog(riyaz.net)]
[http://www.riyaz.net/blog/xipi-java-mapping-demystified/technology/sap/415/]
Regards,
Prasanna.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

How to map context values in controller and a view

Hi,
I am trying to use Web Dynpro as an interface for an application where I need to load two Graphs in to two different Views and produce a third graph. Could anyone advise me how to map the context values in the component controller and a view when I load a Graph in to the Web Dypro Console. Please help me I would appreciate your help.
Thanks a lot,
Phani.

Hi Phani,
The following links should be helpful.
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/444941db42f423e10000000a155106/frameset.htm
regards,
AE

How to map 0LOGSYS and 0SOURSYSTEM

Similar Messages

Maybe you are looking for