How to map 2 AD groups into 2 different LOCAL Identity Groups in ACS5.2?

hi guis!
i want to map 2 groups from external AD to 2 internal groups. like it was in 4.x. can someone advise me how to do this?

In order to map 2 different AD groups to 2 different local Identity groups we will need to do the following.
Assuming that the ACS is already Joined to a domain for example csco.com
1. we need to populate the concerned 2 AD groups in
Users and Identity Stores > External Identity Stores > Active Directory > Directory Groups tab.
To do this please follow the steps given in the following link "Selecting an AD Group"
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/users_id_stores.html#wp1140999
Once we have the 2 groups populated in there we now need to create a Group mapping policy under the concerned Access Service to map each AD group to the internal group (Internal groups need to be created prior).
1. Make sure group mapping policy option is enabled for the concerned Access Service.
Access Policies > Select the Access Service > Edit
Under General Tab > Policy Structure > Make sure "Group Mapping" is checked
2. Configure group mapping under the Access Service. (Lets say the Access Service name is "Default Network Access")
Access Policies > Default Network Access > check the Radio button "Rule based result selection"
3. Configure a rule
Click on Create > Conditions > Check Compound condition >
In the Dictionary choose "AD-AD1"
Attribute Select "ExternalGroups"
Operator "Contains any"
Value > click on select > you should see the the 2 groups of AD added previously > select one for which we making a group mapping
click on add
You should now see a rule in "Current Condition Set"
In results section > Select > the Internal group you want to map it to > click ok
one group mapping is now created. Do exactly the same for the other AD group by creating another rule.
Please save the changes and your group mapping is now ready like the one in ACS 4.
to confirm if it is being used, try authenticating with a user in that AD group and see if the hit counts are increasing on the rule.

Similar Messages

  • SRM-MDM-CAT How to map images in Groups

    Dear all,
    can anybody please explain to me how I can map images in groups to articles?
    What I did yet:
    1. Import Images from different suppliers into MDM. Each Supplier has his own image group. Am I right if I think the images in a group are unique? So two or more images can have the same name in different groups and I then have different pictures?
    2. Now I want to map my articles to these pictures with the import manager. I have the fields: supplier (=group), article_numer and image.
        So how can I map the group into import manager? I only see the image field?
    Best regards and thanks for help.
    Roman

    Hi Roman,
    are you uploading the picture files directly into the repository or you only using hyperlinks?
    By hyperlinks you can map this directly in the import manager. The image you have to import.
    If you have all the needed pictures in the rep., then you have to map this in Data Manager.
    There you have to select the items, which should have the same picture and in Image you can select the picture. Don't forget to save the changes!
    I hope this helps.
    Regards,
    Tamá

  • How to map Portal User groups to a MDM System?

    Hi,
    Have anyone tried mapping portal user group to a MDM System?
    The idea is to avoid each user to do user mapping for MDM of their own.
    When i look into the usermapping section of a portal user group, it shows me a message -
    "There are no systems available for user mapping for the selected principal"
    Thanks and best regards,
    Arun prabhu S

    Hi All,
    Got it!
    1. Create portal users,
    2. Create a portal user group,
    3. Assign Users to User group,
    4. Go to System Administration, edit permission of the MDM system, add the user group to the MDM system permission list and save
    5. Go to User Management, modify the user grooup, go to the User mapping of the user group and do mapping for MDM system and user group using a valid MDM User name and password and Save
    6. In User Management, modify the Portal role for MDM , add the user group to the role and save
    7. Edit permission of the role object, add the user group to the permission list and save
    Result:
    All the users assigned to the user group will be able to access MDM information on the portal correspond to the MDM mapping done at the user group level. This avoids self user mapping in personalization link.
    Best regards,
    Arun prabhu S

  • How to map 2 tables together into a new one, like an Union?

    Hi.
    I am new in Oracle Data Warehouse Builder and what I'm wanting to do could be simple.
    My question is: How to map 2 tables into a new one? That is, what I need is to do a Union.
    See the following tables:
    What I have is:
    ---------------+ ---------------+
    | A | B | | A | B |
    |--------------- |---------------
    | 10 | 34 | | 13 | 39 |
    ---------------+ ---------------+
    Table 1 Table 2
    What I wish is:
    ---------------+ ----------------------+
    | A | B | Original table |
    |--------------- ----------------------+
    | 10 | 34 | 1 |
    |--------------- ----------------------+
    | 13 | 39 | 2 |
    |--------------- ----------------------+
    Then, I need put all data together into a new table and this new table should has a new column showing the original source of data to each record.
    Can I do such thing?
    I'm using the Oracle Warehouse Builder and trying to do a map in this way.
    Any hint will be very helpful. I also will appreciate an indication of some document which can show how to do it.
    Thanks .
    Rodrigo Pimenta.
    Brazil.

    Use the SET OPERATOR. That should help i guess.

  • How to Map ERP account group on SAP Cloud for customer

    I am puzzled that i do not find a way to configure ERP Account Groups to SAP Cloud for Customer solution. Am i missing something or some workaround is possible to do have that available in a ERP<-> HCI <-> C4C scenario.
    Regards
    Apoorva

    Hello Apoorva
    This is the Business Partner Role Code  - it maps to customizing in ERP for: 
    Logistics - General -> Business Partner -> Customers -> Control -> Define Account Groups and Field Selection for Customers
    -ginger

  • Numbers 3.1:  How do I move a table into a different sheet?

    I have just decided to bite the bullet and start using Numbers 3.1.  One immediate problem I have found is to know how to move a table from one sheet into another.  It used to be simple, but now I can't find how to do it.  I have seatched Help and Tutorials, but can't find anything, and I am in a hurry.  HELP!

    Hi Mr. Jinks,
    Thanks to all of you who suggested cutting the table and pasting it into an alternative sheet.  The problem I now have is that this does not work where cells are referenced by calculations in other tables
    But I think links between tables can work fine if you want them to.  Here's what I see on my machine:
    On Sheet 1, a formula in Table 2 referring to Table 1:
    Here's Table 2 cut and pasted to Sheet 2, formula intact, referring to Table 1 on Sheet 1.
    If you want the tables on separate sheets, move the table whose formulas refer to a separate source table.
    SG

  • How can I transform an image into a different design?

    I've used the Distort effects in AE to modify the following video:
    Into this:
    I'm a pretty pleased with the results.  I simply used the Transform and Mirror effects.
    However, I have a bunch of other designs which I can't distort into a good alternative design by using the same method.  Here is an example:
    I am hoping some of you very clever people can come up with a method I can use for transforming this sort of design into something decent!
    Thanks!

    Thanks for the replies!
    I realise this is a broad question.  I will elaborate on the images from my first post in order to provide more details:
    1)  I have generated a number of animated designs, the blue image when animated looks like moving electricity.  All of the designs are geometric patterns of one form or another.  I have around 50 of these designs.
    2)  I want to create variations on these geometric animations. Rather than start from scratch and create a brand new design (which is a lengthy process), I want to use the effects in After Effects to create variations.  In the example I provided, I took the blue design and used a number of effects to create the green design.
    3)  Essentially, I now have two different animations.  The blue original, and the green variation.
    4)  Here is my question.  Are there any specific effects within After Effects, that allow me to distort an image/animation to such a degree that it essentially looks like a different image/animation?  So far, I have used Transform and Mirror.
    I gave Kaleidoscope a try, and that gave some good results, so thanks for that suggestion.
    5)  The problem I am having is that some of my other designs are more or less 'symmetrical' in appearance - like the yellow image from my first post.  The Transform, Mirror and Kaleidoscope effects do not really distort the symmetrical animations enough.  This is because they simply tend to either rotate the image (which is a circle, so rotating it does little), or they mirror the design (which again does little as the image is a circle).  So, are there any other effects I can choose which will distort a symmetrical geometrical design, whilst still retaining a degree of geometric appearance?
    I thank you again for your time, it really is appreciated!
    EDIT:  As Todd Kopriva suggested, here is the link to the other forum post:  http://forums.creativecow.net/readpost/2/1008997  - I forgot to link back to this forum from there.  I will add that shortly.

  • How to move partitions/sub-partitions into a different tablespace?

    Hi Uisng oracle 1..20.3 and have a range-hash partitioned table using interval partitioning - code below.
    Works fine just one problem.
    we wish to move the system geneerated partitions to different tablespaces later and also rename th epartitions.
    When try assign partition to a different tablespace get the folloiwng message
    alter table por_rt move partition SYS_P2283 tablespace bi_dw_data
    get message ora-14257 - cannot move partition other than range,list, system or hash partition.
    How can we avoid this.
    We we need to move all the subpartitions first?
    Tried this
    alter table move subpartition SYS_SUBP2269 tablespace bi_dw_data;
    but get message ora-01735 message invalid statement
    -- Create table
    create table POR_RT
      plant_issue_id    NUMBER not null,
      pf_run_num        NUMBER,
      partitioning_date DATE
    partition by range (PARTITIONING_DATE)
    subpartition by hash (PLANT_ISSUE_ID)
      partition PART_200912 values less than (TO_DATE(' 2010-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
        tablespace BI_SUPPORT_DATA
        pctfree 10
        initrans 1
        maxtrans 255
        subpartition SYS_SUBP2261 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2262 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2263 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2264 tablespace BI_SUPPORT_DATA
      partition PART_201001 values less than (TO_DATE(' 2010-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
        tablespace BI_SUPPORT_DATA
        pctfree 10
        initrans 1
        maxtrans 255
        subpartition SYS_SUBP2265 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2266 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2267 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2268 tablespace BI_SUPPORT_DATA
      partition SYS_P2273 values less than (TO_DATE(' 2010-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
        tablespace BI_SUPPORT_DATA
        pctfree 10
        initrans 1
        maxtrans 255
        subpartition SYS_SUBP2269 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2270 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2271 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2272 tablespace BI_SUPPORT_DATA
      partition SYS_P2283 values less than (TO_DATE(' 2010-07-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
        tablespace BI_SUPPORT_DATA
        pctfree 10
        initrans 1
        maxtrans 255
        subpartition SYS_SUBP2279 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2280 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2281 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2282 tablespace BI_SUPPORT_DATA
      partition SYS_P2278 values less than (TO_DATE(' 2010-08-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
        tablespace BI_SUPPORT_DATA
        pctfree 10
        initrans 1
        maxtrans 255
        subpartition SYS_SUBP2274 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2275 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2276 tablespace BI_SUPPORT_DATA,
        subpartition SYS_SUBP2277 tablespace BI_SUPPORT_DATA
    );Edited by: user5716448 on 22-Mar-2013 04:49

    you can not move composite parition directly you need to move subpartition using this statments
    alter table <tablename> move subpartition <sub partition name > tablespace <tablespace name>;
    than change partition tablespace using
    ALTER TABLE <table name> MODIFY DEFAULT ATTRIBUTES FOR PARTITION      <partition name> TABLESPACE <tablespace name>;

  • How to map an object to its ID in a table?

    Here is my situation:
    class Foo {
      private Bar bar;
    }How to map the Bar object into a DB table column of its ID on the ORM mapping file?
    Thanks very much in advance.

    Never mind. I have solved this issue myself.
    Message was edited by:
    vwuvancouver

  • How to map single input value to Two columns of Database table using format file of Bulk Copy Process

    Hi All,
    Am using OPENROWSET to load the file data into table, here the problem is i need to map same input value to two different columns of table, As format file doesn't allow the duplicate numbers am unable to insert same value to two columns, please help me to
    find a solution for this. 
    i can use only OPENROWSET because i need to insert some default values also which come based on file. only the problem is how to map same input value to two different columns of table. please give me the suggestions.
    Thanks,
    Sudhakar

    From what you say:
       INSERT tbl(col1, col2)
          SELECT col1, col1
          FROM   OPENROWSET(....)
    But I guess it is more difficult. You need to give more details. What sort of data source do you have? What does your query look like? The target table?
    Erland Sommarskog, SQL Server MVP, [email protected]
    Hi Erland,
    Thanks for your response
    my source file is text file with | symbol separate for ex:
    1002|eTab |V101|eTablet|V100|Logic|LT-7|Laptops|SCM
    Database table have columns like
    column1,column2,column3...etc, now i need to insert same value from input file into two columns for ex:
    the eTab value from text file has to be insert into column2 and column3 of
    table
    we cannot change format file like below one
    for the above situation how can we insert eTab into column2 and column3
    Thanks,
    Sudhakar.

  • How to map the font folder with particular instance?

    Hello All,
    I need a quick clarification on one of the requirement in InDesign Server that whether we can map the fonts folder for particular instance say if there are 5 multiple instances, can we map these 5 instances into 5 different font folders? Please advise.
    Thanks,
    Praveen

    Sounds like you need http://helpx.adobe.com/indesign/using/using-fonts.html#document_installed_fonts
    Dirk

  • I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

    I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location.  They are pictures taken at different times and have the same number I guess.

    In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
    If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
    LN

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • How do you get your contacts into groups?

    how do you get your contacts into groups?

    When you ask a question, please include the version of Mac OS X on your computer. iOS is not a Mac operating system.
    Assuming you are running OS 10.9.1:
    Open Contacts. Click File in the menu bar and select New Group. Enter the name of the group in Contacts on the left.
    Go back to All Contacts (on the left) then drag and drop the names you want in that group on to the folder you just named.
    Repeat as necessary for other groups.
    Note that the names remain, as they should, in All Contacts, even after you have added them to a group.. You can delete a group if you want. The names will still remain in All Contacts.

  • How do I put a group of tracks into one album

    How do I put a group of songs into one album?  They copied separately into iTunes.

    Generally, in iTunes, all you need to do is fill in an appropriate Album Artist to keep things together. For older iPods each track from the same album should have the same artist, or be marked as a compilation where appropriate. On iOS devices you may need to go to Settings > Music > Group By Album Artist > On. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

Maybe you are looking for