How to map accounts for RCA, CLS, IRV and PPV account titles??

Hi,
We are on 11.5.9 and using PMAC costing.
While mapping for CLS, RCA, IRV, PPV account titles, I am getting confused to what accounts should i have to map these a/c titles :( I understand why those accounts are generated but somehow, am unable to find out the way to map them..
I have gone thru Metalink and user guides but there doesn't seem to be any clue for it.
Pl help me out.
Rgds,

Hi MAK,
Usually, RCA and CLS accounting titles are mapped to Production Batch Transactions. CLS is used to map Batch Closure Variance, amount required to clear WIP account. Typical reasons for non-zero closing variances are:
* Batch Release and Certification in different cost periods
* With PMAC, the average costs include the period end balance, which may create a variance.
RCA (Resource Control Account) represents the value of Resources (Direct / Indirect Labor etc.), burden cost allocated to the Production batch. MAC subledger accounting user guide provide in-depth documentation on these accounting titles.
Regards,
Sanjeev

Similar Messages

How to Map Fomulas for Float Glass Process

Hi All,
Can anybody suggest how to map formulas for float glass process.
As in float Glass process continuous production is going on single line, within that continuous ingredients are added in furnace and molten glass mass is coming out. this molten glass is now adjusted to particular thickness and then finally cut into specific sizes as per cusotmer requirment.
Final product is in various thickness, width and length.
Entire process is automated.
If anybody already implemented same scenario, please share knowledge.

Hi
The following is the mapping process and it is tricky process need to map carefully.
You can define this as a single formula.
Output: Packed - cut to size - Finished Good Item.
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Packaging materials + Labels + Boxes etc.
Define Routing:
Resource: Furnace, Any other importance resource like Equipment that controls thickness, cutter etc, Labor, Associated Overhead
Create recipe using the formula and routing.
Various factors that can affect the mapping:
1) Formula maintenance: You have to define formula for each output item.
2) Possibility of dynamic determination of output item: If it is possible to produce different combination of thickness/width (and hence different FG item) in the same batch, then this won't be the right mapping.
3) Process variations: Also formula mapping depends on how accurate is production process. If user wants to produce item X (say thickness 10mm) but due to quality issue produced item Y (say thickness 9mm) and such cases happens very often, this won't be right solution.
4) Inventory measurement: This will determine the break-points. If you cannot measure the quantity (or even estimate) then you cannot define it as an intermediate item.
I will explain how point 4 can lead to different way of formula mapping.
Say you have a furnace that needs to run continuously for better quality or throughput. Hence you will be continuously adding raw materials to furnace and produce different outputs. You can break the single formula into multiple formulas as -
Formula 1) Output: Molten mass of glass
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Formula 2) Output: Packed - cut to size - Finished Good Item.
Input: Molten mass of glass
To have formula in such fashion you should have a way to measure or estimate the weight of Molten mass of glass.
If you are estimating the weight, there should be historical data available to determine what should be realistic output quantity for given input quantity. How much will be process loss and loss due to unwanted by product such as slag etc.
Further you can break formula 2 as
Output: One large sheet of give thickness
Input: Molten mass of glass
Output: Packed - cut to size - Finished Good Item.
Input: The large sheet of give thickness.
This kind of different mapping is possible which normally depends on:
1) Complexity of process
2) How complex BOM structure user wants to have
3) Are there any benefits of maintaining such complex system - like accurate costing or accurate production monitoring or facilitating planning process.
4) Can user maintain the complex system? Are they ready to capture data at finer level. Is it possible to capture the data.
5) And most important thing is how to handle exceptions. If every thing goes smoothly as planned (less exceptions) then user can have and afford any level of complexity. But if there are many exceptions to the normal process you have to concentrate more on how to handle the exceptions.
6) Satisfy all users: Accounting, Planning, Production, Quality, Inventory handling. Formula/Recipe touches all these modules.
Regards
Raj
Sierra

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

How can I compensate for what a transition takes from a title clip?

I'm putting together, in iMovie 4, a slideshow, consisting entirely of clips from the Photo Pane. I imported my clips to the Viewer, then added cross-dissolve transitions, except where I wanted to create a title. Some clips have the Ken Burns Effect.
Here's the problem: after I add a title clip, then add transitions in front & back of it, the title clip's duration reduces. With the title highlighted, I go back into the Title Pane and increase its duration, but the transition bleeds off the increase, as it re-renders, every time. There's no problem updating a photo clip between two dissolves.
The cross-dissolves are about 1:20 in duration. I want my title clips to be about 2:10 or so. There's also the problem with title clips that their total duration is a combination of speed and pause. So adjusting their duration is complicated, once I get the total duration I want, but then have to try compensating for what the transition will take away.
Has anyone solved this problem for themselves, & if so, what do they suggest?
HAPPY NEW YEAR!
David

What if you put a photo down for a set duration, and
then put the same photo down back to back with the
first one, and use the second one to make the
transition with? Then of course, use a "transition"
photo for the next clip, and then back to back with
it, with a secondary clip of the same photo to last
the desired duration before you go on to the next
clip, with a third but same photo dedicated to make
the transition with? And so on...
Your suggestion has helped me in other ways by introducing me to the concept of adding clips to solve problems. I won't get into the details. Lennart, some time ago, suggested the same thing in another context, which worked, but I didn't transfer that knowledge, until now. Thanks.

How to map services for Implementation Project

Hii
its an implementation project
Client is providing normal sales and services ( Job work ) also
for that purpose how we can map services in SAP SD
1 ) by creating different sales org (services)
or
2 ) by creating different doc type for services
which 1 is better
ThanX

HI,
Service document is most better.......b'coz you will get efficient reports thr this...and you ccan maintain Diff Pricing procedure for this....
Regards
Raj

I downloaded money to my account from an itunes card. How do I pay for music with that and not my credit card

how do I deduct payment for music from a recently downloaded iTunes card and not my credit card

Just click on the song's/album's price button and it should automatically be deducted from your balance - you can't specify how items are charged, it's automatic.
The only time that your credit card should be charged is when gifting, you can't use your balance for that, or if your balance doesn't cover the entire price (in which case the remainder would be charged to the card).

How to map printers for domain users?

That's exactly how I've done it. I have a print server, and I deploy the printer via Group Policy (User config > preferences > control panel settings > printers).

Hey everyone!
I'm looking for some help. I need my end users to be able to print but I don't want to go around to all the work stations and add the printers manually (way too busy for that!) so I'm looking for a script, .vbs or .bat that I can put in the sysvol folder so I can have the printers be added once the user logins and will follow the user around no matter what computer that they log into.
Not a big scripting guy so looking for some help!
Thanks!
This topic first appeared in the Spiceworks Community

Upgrade Preparation: How to map applications, DTS packages, SSIS packages and reports to databases

Hi,
I am on the initial phase of upgrading SQL Server 2005 to SQL Server 2012. Right now, I'm taking as much inventory as I can from our current server, SQL Server 2005. If anyone could help me, how can I map the following:
Map applications to databases
Map DTS packages to databases
Map SSIS packages to databases
Map reports to databases
Thank you!

Some questions and suggestions:
How are we planning to upgrade whether in-place\parallel\others?
Will this be with HA[Clustered one] or with standalone?
Do you have time to do actual migration from now on and you will need to setup the environment for end to end testing for application validation so that all differences between application or system variables can be known before actual deployment?
Also, it will be good to check with Upgrade Advisor for below pointers preparedness too.
Map applications to databases: If you have already need to setup databases and logins for each and every applications then your mapping to database for applications will be lot easier and you will have less challenge.
Map DTS packages to databases: Good link to check
https://www.simple-talk.com/sql/ssis/dts-to-ssis-migration/
Map SSIS packages to databases: Good link to check
http://www.experts-exchange.com/Database/MS-SQL-Server/Q_28340818.html http://www.sqlservercentral.com/Forums/Topic1531839-2799-1.aspx
Map reports to databases -- Good link for Reporting Services if you meant that:
http://msdn.microsoft.com/en-us/library/ms143747.aspx
http://www.mssqltips.com/sqlservertip/2627/migrating-sql-reporting-services-to-a-new-server/
Good link to check other thing as well :
http://thomaslarock.com/2013/03/upgrading-to-sql-2012-ten-things-you-dont-want-to-miss/
Santosh Singh

How to use bind_variable for connectivity between Oracle and SQLServer 2005

The code specified below could be used as an example of how to call a remote SQLServer 2005 procedure from Oracle.
The problem I am facing is that I am not able to use the dbms_hs_passthrough.bind_variable without exceptions.
Could someone help me out on this?
declare
CREATE PROCEDURE dbo.OrcaMessageTranslator
@inp nvarchar(255),
@outp nvarchar(255) output
AS
BEGIN
select @outp = @inp+'output'
END
c integer;
nr integer;
inp varchar2(255);
outp varchar2(255);
sql_stmt varchar2(32767);
begin
dbms_output.put_line('call SQLServer procedure OrcaMessageTranslator');
dbms_output.put_line('value of input variable inp is HowToReplaceThisValueByBindVariable ');
sql_stmt := 'DECLARE @outp nvarchar(255)
EXEC dbo.OrcaMessageTranslator
@inp = N''HowToReplaceThisValueByBindVariable'',
@outp = @outp OUTPUT
SELECT @outp as N''@outp''';
c := dbms_hs_passthrough.open_cursor@pp_preorca;
dbms_hs_passthrough.parse@pp_preorca(c,sql_stmt);
nr := dbms_hs_passthrough.fetch_row@pp_preorca(c);
dbms_hs_passthrough.get_value@pp_preorca(c, 1, outp);
dbms_hs_passthrough.close_cursor@pp_preorca(c);
dbms_output.put_line('acquired value of output variable outp is '||outp);
end;

Hi,
BIND_VARIABLE is useful when you have only IN variable but in your case you have IN and OUT.
I don't know if you use the gateway for MS SQL SERVER or HSODBC/DG4ODBC but here how you can do to call a remote procedure with bind variables:
DECLARE
ret integer;
inp varchar2(255);
outp varchar2(255);
BEGIN
inp :='Hello World';
outp :='';
ret := "dbo"."in_out_proc_test"@tg4msql( inp, outp);
dbms_output.put_line('Input value: ' ||v_ut1||' - Output value: '||v_ut2);
END;
The MS SQL Server procedure belongs to the user "dbo" and the database link
being used is tg4msql.
The following line initilaize the out variables of the procedure with an
empty string:
outp :=''
I hope it helps you.
Regards
Mireille

How do you setup for your multi cores and other settings?

since the preferences doesnt really give us a option does that mean that FCPX just "knows" how good your computer is and what you want to devote (memory wise, etc) to it?

I have the same problem - beach balls and temporary freezing, on 2 Mac Pros (8 Core, 32GB RAM, HD5870 card). All the while CPU and other resources are not maxed out; this is on 10.6.8. there seems to be 'some' bugs - for some people - that in fact make FCPS quite slow (and slowing hte system down as well) all the while there is no bottleneck in hardware....

How to replace #Missing for a 0 number and not '0

Hello, I will like to know if any of you know how to replace in Excel the #Missing for a 0 (number 0), and not '0 (text 0), that is what it always return.
Thanks

Great Tim!!
Though i did not raise this question, i have been having this in mind for months from now.
This worked like a magic.
Yes you are right, it is not advisable when the sheet is meant for lock and send as it would create unwanted blocks.
Thanks for your help.
With Regards,
Rajkumar

How to Improve Design for HTML, Plain Text and Multiple Recipients?

Hello there,
JavaMail programming is so fun! I first start off mixing the JavaMail code inside a servlet and then refactored it to two separate classes.
Mailer is the independent class which uses JNDI to look up config parameters, sends e-mails, and then closes the connection with the protocol.
public class Mailer {
     private Session mailSession;
     protected void sendMsg(String email, String subject, String body)
     throws MessagingException, NamingException {
          Properties props = new Properties();
          InitialContext ictx = new InitialContext(props);
          Session mailSession = (Session) ictx.lookup("java:/Mail");
          String username = (String) props.get("mail.smtps.user");
          String password = (String) props.get("mail.smtps.password");
          MimeMessage message = new MimeMessage(mailSession);
          message.setSubject(subject);
          message.setRecipients(javax.mail.Message.RecipientType.TO,
                    javax.mail.internet.InternetAddress.parse(email, false));
          message.setText(body);
          message.saveChanges();
          Transport transport = mailSession.getTransport("smtps");
          try {
               transport.connect(username, password);
               transport.sendMessage(message, message.getAllRecipients());
               Logger.getLogger(this.getClass()).warn("Message sent");
          finally {
               transport.close();
}MailController is just a simple Java servlet where a Mailer object is instantiated and a String is passed inside the Mailer.sendMsg() method.
public class MailController extends HttpServlet {
     /** static final HTML setting for content type */
     private static final String HTML = "text/html";
     myapp/** static final HTML setting for content type */
     private static final String PLAIN = "text/plain";
     public void doGet(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
          doPost(request, response);
     public void doPost(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
          response.setContentType(PLAIN);
          PrintWriter out = response.getWriter();
          String mailToken = TokenUtil.getEncryptedKey();
          String body = "Hello there, " + "\n\n"
                    + "Wanna play a game of golf?" + "\n\n"
                 + "Please confirm: https://localhost:8443/myapp/confirm?token="
                 + mailToken + "\n\n" + "-Golf USA";
          Mailer mailer = new Mailer();
          try {
               mailer.sendMsg("[email protected]", "Golf Invitation!", body);
               out.println("Message Sent");
          catch (MessagingException e) {
               e.printStackTrace();
          catch (NamingException e) {
               e.printStackTrace();
}Have some design issues...
If you can notice, I manually place the body of the e-mail (as a String) from inside the client (in this case, a Java Servlet). Also, I manually have to switch the content type inside the doPost().
Question(s):
(1) How can the Mailer class be set up, so it can send both HTML and plain text messages?
(2) How can the Mailer class be structured to send e-mail to multiple recipients or one user?
(3) Would both of these features / actions require writing two overloaded methods for sendMsg()?
Would appreciate it if someone could help me...
Happy programming,
Michael

Okay, I came up with this single method:
Mailer.java:
public class Mailer
     private Session mailSession;
     protected void sendMessage(String email, String recipient, String subject,
               String plainText, String htmlText)
        throws MessagingException, NamingException
          Properties props = new Properties();
          InitialContext ictx = new InitialContext(props);
          Session mailSession = (Session) ictx.lookup("java:/Mail");
          String username = (String) props.get("mail.smtps.user");
          String password = (String) props.get("mail.smtps.password");
          MimeMessage message = new MimeMessage(mailSession);
          InternetAddress from = new InternetAddress(email);
          InternetAddress to = new InternetAddress(recipient);
          message.setSubject(subject);
          message.setFrom(from);
          message.addRecipient(Message.RecipientType.TO, to);
          Multipart multipart = new MimeMultipart();
          BodyPart messageBodyPart = new MimeBodyPart();
          messageBodyPart.setText(plainText);
          multipart.addBodyPart(messageBodyPart);
          messageBodyPart = new MimeBodyPart();
          messageBodyPart.setContent(htmlText, "text/html");
          multipart.addBodyPart(messageBodyPart);
          message.setContent(multipart);
          Transport transport = mailSession.getTransport("smtps");
          try {
               transport.connect(username, password);
               transport.sendMessage(message, message.getAllRecipients());
               Logger.getLogger(this.getClass()).info("Message sent");
          catch (Throwable t) {
               Logger.getLogger(this.getClass()).error("Unable to Send Message");
               t.printStackTrace();
          finally {
               transport.close();
}Created a MailController class to instantiate and run the Mailer class.
public class MailController extends HttpServlet {
     // doPost() method()
     public void doPost(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
          response.setContentType(PLAIN);
          PrintWriter out = response.getWriter();
          String mailToken = TokenUtil.getEncryptedKey();
          String plainText = "Hello there, " + "\n\n"
                    + "I wanna invite you to a game of golf!" + "\n\n"
     + "Please confirm: https://localhost:8443/myapp/confirm?token="
                    + mailToken + "\n\n" + "-Golf USA";
          String htmlText = "<H1>Golfer Challenge!</H1>";
          Mailer mailer = new Mailer();
          try {
               String from = "[email protected]";
               String recipient = "[email protected]";
               String subject = "Golf Challenge";
               mailer.sendMessage(from, recipient, subject, plainText, htmlText);
               Logger.getLogger(
                           this.getClass()).info("Message Sent to: " + recipient
                                                          + " from: " + email);
               out.println("Message Sent to: " +
                                         recipient + "\n" + " from: " + email);
          catch (MessagingException e) {
               e.printStackTrace();
          catch (NamingException e) {
               e.printStackTrace();
}Question(s):
(1) How come the Multipart Alternative only supports HTML for the second part? Can I specify it to send HTML first and plainText second?
(2) How would I send in multiple recipients? Would I have to pass in an array reference (surrounded by a for loop) inside sendMessage() as follows:
mailer.sendMessage(from, myArray, subject, plainText, htmlText);
Thank you for all of your help!
-Michael

How to support metadata for docx, csv, indb and others.

Hello,
Is there a plugin or a way to extend the supported extensions for metadata, especially IPTC Core?

Randall T wrote:
I recently started migrating my software to version 2009 and needed to update the device drivers on the development PC. The following message was displayed.
{LabVIEW Version Not Supported
This installer has detected that you have a version of LabVIEW that is not supported by NI-DAQmx. Please refer to the feature tree in this installer to see which versions of LabVIEW are supported by NI-DAQmx in this release. This installer will remove NI-DAQmx from any unsupported versions of LabVIEW.}
I still have a wide base of applications operating in LabVIEW 7.1. I assume others still have to support earlier versions of LabVIEW. How do we do this? Should we only develop software that uses NI based hardware on LabVIEW 8.6 and earlier? Do you only use 2009 and later versions for applications that do not require NI-DAQmx? Is keeping the development software for 2009 and 2010 on a separate machine the answer? Or is there a simpler solution that I am overlooking?
I was keeping a unique machine for each version but then switched to multiple boots.
I have read others that said they use virtual machines for each.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How much it cost for 3gs 16gb motherboard and from where can i buy

how much for iphone 3gs 16 gb mother board as it is dead now and nobody can repair it here in pakistan
and please tell me how to factory unlock iphone 4g ios 4.2.1 locked on AT&T some company advertise that they can give password for it but most of them looks scam to me
thans
arsi

Apple does not sell parts... you'll need to look elsewhere.
All US sold iPhones (except CDMA models) are carrier locked to AT&T.
Neither AT&T or Apple will unlock any US sold iPhone.
If you really want it unlocked, you will need to look to other unofficial methods which cannot be discussed here.

How to map accounts for RCA, CLS, IRV and PPV account titles??

Similar Messages

Maybe you are looking for