How to map CRM BP relationship and R/3 customer partner funnction

Hello !
Please, I need the following actions:
1) during BP initial download from R/3 to CRM, a specific partner function should be mapped by a CRM relationship (Example: in R/3 master data, customer X is the Payer of customer Y. I'd like this partner function "Payer" should be mapped by BP relationship "Payer" in CRM);
2) a particular relationship between BPs in CRM should be mapped by the corresponding R/3 partner function during upload from CRM to R/3.
Please, can anyone help me ?
Thank you.
Kind regards.
Elena

Hi, Venkat.
Thank you for your answer, but the question is: is it possible to define the correspondece between R/3 partner function and CRM relationship ? I know transaction PIDE: it allows to map R/3 accont group and CRM roles.
Thank you very much.
Bye.
Elena

Similar Messages

How to map values between Contract and Purchase Order...

Hi friends,
We are using SRM 5.0 (ECS). I am facing a problem with Purchase Order.
. I am creating Contract locally through Live Auction. After that I am creating Purchase Order through Live Auction. So in Purchase Order Quantity, Net Price, Gross Price, and Long Text etc. not coming which is defined in Contract. PO capturing the values from Live Auction, means no relation between the Contract and Purchase Order. After making Contract again I have to changes in the Purchase Order.
So how to map the values from Contract to PO in SRM? I want to map between contract and Purchase Order like R/3. At the time of creation of PO ( in R/3 ) we can adopt the Contract so all the relevant values comes from Contract to PO. In SRM how will I do?
Please suggest me.

When you create PO and a contract from a Live Auciton, they will not be mapped.
While creating a PO (BBP_POC - Process Purchase Order); in the PO line item assign the contract and item reference. Only then they will be linked.
Hope this helps.
Regards
Kathirvel

How to map CRM roles to EP roles

Hello,
I have created one coordinator roles in CRM and assigned to one user.
Assigned defualt EP role also, but user is not getting any worksheets and ivews.
How can we map the CRM roles to EP roels.
Thanks
Purna

Purna,
The portal roles drive the iView, workhseet, etc. The backend CRM roles give the needed authorization to run CRM.
I assume your CRM Coordinator role is a custom role, you can either assign the standard CRM Portal Roles that provide the related iView for that backend role or create new CRM Portal Role using Content Admin. You can find the standard CRM portal roles by User Admin, change Search Criteria to Role and uses crm.
Don't forget to check the permission on your new portal roles.
Good luck.
Lye
Hope this

How actually Oracle CRM On Demand and Outlook integration works?

Hi Everyone,
Here my question means not how to configure this integration but what is behind this technology. Can someone put some light on technical aspect of it? I wanted to know on what technology this integration is based on and other details if u can provide.
Please help.
Regards,
Abhay

Hello Abhay,
Actually I am not looking for this. I need to know on what this integration is based on? Like if it is based on Webservices, API, HTTPS Request like that...! Can you tell me about it?Unfortunately I cannot share details of the design. If you can tell me what you are trying to do, I'll do my best to provide you with whatever information I have available.
Please also it will be great if anyone can tell me if such integration works fine through Citrix connection?Oracle does not currently certify or support desktop or application virtualization solutions, such as Citrix products, for use with Oracle CRM On Demand. Please refer to "CRM On Demand - Support - Citrix [ID 958822.1]" in http://support.oracle.com for more information.
Thanks,
Sean

How to validate concurrent program parameter and display a custom message?

Hi Friends,
I have a concurrent program which has two non-mandatory parameters.
The requirement is that user should provide value for any one of the parameters.
If user does not enter value for both the parameters, i need to display a custom error message.
Parameter1 has an independent value set.
Parameter2 has character value set with validation type as special.
Process i tried so far:
In the value set for the second parameter, under the Validate event, i have written the following code:
FND PLSQL "declare
l_paramb VARCHAR2(20) := :!VALUE;
l_parama VARCHAR2(20) := :$FLEX$.MOT_CUSTMSGTST_A;
BEGIN
IF 1 = 1 THEN
fnd_message.set_name('FND','FND_GENERIC_MESSAGE');
fnd_message.set_token('MESSAGE','Please enter any of the ip1 or ip2');
fnd_message.raise_error;
END IF;
END;" I am not using those variables that are defined for the time being.
Now since the condition 1=1 is always satisfied, i should always receive the error message.
I am not receving any error message and i can go ahead and submit the program..
Please advise on where am i going wrong.
Reports Version - 6i
Oracle Apps Version - 11.5.10.2
Regards,
Sreekanth Munagala

Hi srrekanth,,
I've similar issue , I need to display custom message for concurrent program parameter.Need to validate the parameter & display custom message .
Can you pl provide solution.

How to map import process for items

Dear All,
can anyone guide me how to map import process for items for our customer
what i understand is this process in B one
Raise PO
GRPO
Landed Cost
AP Invoice
I want to know whether this is correct. Also in this process their are clearing agents who perform the formalities at customs office and then raise bill to client for the same

Hi,
The process looks correct. For cost related to clearing agents who perform the formalities at customs office, use landed cost.
Thanks,
Gordon

1099 mapping to a vendor and Printout

Hi Experts,
We have received a requirment from my US client for Mapping 1099 MISC to vendors and Print out option. I have researched on the net also but i'm unable to find the result. Can any one guide me how to map vendor to 1099 and how to take printout of 1099MISC form.I'm new to SAP as well as this area. Can you please help me.
Regards
SK

Hi,
Please refer the below link.
http://wiki.sdn.sap.com/wiki/display/ERPFI/1099MISCReporting-USWithholdingtax
Thanks
Narain

Mapping Z-fields of BP in CRM to ECC and vice versa

Hi Gurus,
Z-fields for BP were created in CRM using EEWB and AET tool. These z-fields need to be transferred from CRM to ECC, standard fields like KNB1-ALTKN, KNKK-REVDB,KNKA-KLIME... etc.
Now, that these z-fields are added in the BDoc. I believe no enhancement is required on CRM.
Please guide me on how to map these z-fields from CRM to standard feilds of ECC.
Thanks & Regards
Praveen
Edited by: Praveen on Apr 19, 2010 10:19 AM

Hi,
Thats right! C03 best practices would be certainly helpful to you.
Few important steps for BP repllication from CRM to ECC would be
In CRM , First define your Logical destination in BD54 .
1) SU01 Transaction to create users : create user in CRM & R/3
2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
4) define Queue: SMQR and SMQS - inbound and outbound queue /
Que registration .
5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
a)CRMRFCPAR
b)CRMPAROLTP
c)CRMSUBTAB
d) CRMCONSUM
These are important steps for Middleware settings between CRM & R/3
In addition to this , you need to correctly define your
1) in CRM ,BP GROUPINGS with Internal Number range
2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
You need to also map in CRM correctly the partner functions and R/3 Partner functions.
regards,
PD
Reward points if it helps...

How to link CRM opportunity to R/3 projects through object relationship

Hello everyone,
i have this new development to link CRM opportunity with R/3 projects ( table PROJ ). as user creates the opportunity in CRM in relationships tab he should be able to see the R/3 projects as part of search help when he select create relationship -> projects. i have manged to get the project data from R/3 to CRM through middleware and search help is also showing list of all the projects. problems arises when i try to save the relationship by pressing save button. it gives me error messsage that
'Project with the number SI090100000000000 does not exist ==> Interlinkage is not created'
Please help me how to maintain this linkage.
Thanks
Sudhir Grover

Dear Sudhir,
I have search this help portal a lot to find the solution for my need that,
Present I am working for a project where the same requirement that what you had in one of your project and did successfully. Let me explain about it,
Opportunities will be created in CRM and Projects will be created out side CRM (Project systems) now I have to link this projects information to the corresponding opportunities in CRM.
For this, I was knew we have to set up "Object relationship profile" that is it.
But once I red this thread theoretically I got confidence, the requirement can be achieved by following your way, but here I have the below doubts
1. How to replicate CProjects to CRM from ECC?? (Present middleware set up is working fine (BPs and Products, and etc. replication is happing fine)
2. ITS (PPM URl) is already provided by PPM team and working fine (I have tested using Transaction launcher), in this case can I use that ITS URL?
I am really grateful to you!! Kindly help me out!!
My Email ID is - [email protected]
Thanks and regards,
Shaik.

How to map business process and enterprise service?

Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- People Productivity as the word itself describes...it's about portals and productivity.
- Embedded Analytics has to integrate transactional and analytical content.
- Service Composition is used for model-driven service composition and services orchestration.
- Service Enablement is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- Business Process Platform is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- Life-Cycle Management has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of Business Process Platform BPM is providing the choreography for core business preocesses.
At Service Enablement BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is Service Composition because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff

Mapping Between Business Partners and Customers in CRM and ERP

Hi,
I wanted to know how are the business Partners and Customers replicated from ERP to CRM systems and Vice Versa. I would also want to know how can i check this mapping in the tables.
eg: Get a customer or BP from the ERP system, how do i find it in CRM system.
Regards,
Rishav

Hi Rishav,
Here is how it works.
The table for customers in ERP is KNA1 and the field for customer number is KUNNR.
In CRM the table CRMM_BUT_CUSTNO contains the mapping between customer number in ERP and the BP GUID
in CRM. The table BUT000 in CRM contains the mapping between BP GUID in CRM and the BP Number
Apart from that the table CRMV_BUPA_CUSTNO contains the mapping between Business Partner Number and Customer.
Hope this clarifiies your doubt.
Best Regards,
Shourav.

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

How to map lattitude and longitude on a map in j2me.

hi all,
i am new to this forum and new to j2me.
i am developing a pplication to track location of a gps mobile phone.
i am using wtk2.5.1 jsr179 to develop it
i know how to get location of a mobile phone but i cant find any method how to map those lat long coordinates on a map...
please help me out if anyone knows about it..
thanx

Hi,
I'm afraid that this is large problem... and it's not related to J2ME.
The first question is whether you want to use some map provider and its API or you have a bitmap and you want to place a cursor of your position in the map.
In the first case find an API to use (I don't know any). In the second case you have to understand what the GPS coordination mean, know projection type of the used map, then find and use the transformation formulas to transform GPS coordinates to map coordinates and vice versa.
Regarding the GPS coordinates start here: http://en.wikipedia.org/wiki/World_Geodetic_System
Regarding the projections - my map I tried to use in my application uses Lambert conic conformal projection http://en.wikipedia.org/wiki/Lambert_conformal_conic_projection
but it may differ from map to map.
Enjoy :-)
Rada

How to map CRM BP relationship and R/3 customer partner funnction

Similar Messages

Maybe you are looking for