How to map Due date from Jdev to show in BPM Workspace
Hello,
Requirement:
Due date of the human tasks(that are set in jdev) should be visible in BPM Workspace .
I have added due date column in BPM workspace under process tracking and observed that the column is not reflecting the due date.
I found in a blog that we can map the variables that are required as flex fields to the systemManagedAttributes and then use them in BPM Workspace.
In our requirement, we have date as an input variable, for due date if i use "By Duration" and give 2 days then the date due will the "date which we will give as input+2days". So to map that due date to the systemManagedAttributes, which variables do i need to map so as to reflect the due date in workspace.
Please suggest any other ways of reflecting the due date of human task in BPM workspace.
Thanks,
Sravani.
Hi Sravani,
I admire your innovative solution using flex fields, but there is a simpler way to show the deadlines in the Workspace's task list.
You can simply add the "Expires" column in the Workspace for your Inbox. That way it will automatically show your human task's deadline in the Expires column and you can avoid going the flex field route.
Dan
Similar Messages
-
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How can i store data from a pc to TC
how can I backup data from a PC to TC
Get a suitable backup software..
Windows backup is of course useless. But you should already know that. It will not work on any version less than pro anyway.. due to MS deciding people with home versions should never use networks. ???
That is why there is one million and one third party backup software that do work with network drives. Look up reviews of what works well. for the price you want to pay and get it.. Drive Image was a popular one. I must have a copy somewhere I bought .. then changed to Mac..
There are plenty of free ones.. I do use macrium reflect.. does disk image only unless you pay the license.. but works super well.. particular for restore.. which people kind of forget.. the value of backup is how well does it restore.
Use ethernet if possible.
Note that mixing TM and data on the TC is not necessarily a great idea if you are also running Macs. -
How do I recover data from my dead hard drive?
How do I recover data from my dead hard drive?
Is it dead or corrupt? There are recovery programs out there, however if your HD is head, paying pros to do data recovery is VERY costly. Some have removed the platters and installed them in likewise drives that dont have head crashes, but torque tolerances are tight, and doing it right is a bit advanced and tricky for most. Ive done HD disk swaps 4 times and had success 3 of the 4 times. It requires cannibalizing another working HD. In the future remember the golden rule, 2 copies is 1, and one is NONE.
Its likely you could find a local computer repair station that can do it for you cheaply. HD dont really "die", they have fried SATA bus, or crashed HEADS........the platters DO demagnatize over long time due to heat and degauss of the data (poor storage, etc).........but in specific, a HARD DRIVE DOESNT DIE ,.........only the flying head mechanisms that read and write the data, and SATA / bus that feeds the data DIES,.......but the data (unless corrupt or magnetically corrupted) is THERE -
How to move BCS data from one box to other
Hello Expert,
Dose any one know how to move BCS data from one box to other box ?
Thanks & Regards,1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
2) As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system. -
APD process is active, How to trigger the data from BI to CRM table
Hi All,
I want to send data from BI system(using APD method) to CRM table (ADS method).
I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
Please let me know the steps.
Regards.
Nithi.Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves... -
How can I Move data from one column to another in my access table?
I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message.. -
How do i transfer data from one internal tabe to another.
Hi All,
How do i transfer data from one internal tabe to another.
Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
Syntax
APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
* Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
Syntax
INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
Syntax MOVE <itab1> To <itab2>.
OR
<itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
MOVE-CORRESPONDING <itab1> TO <itab2>
this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose -
How do I transfer data from one exterior harddrive to another?
How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?
Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good. -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
How to get all data from nokia to i5s
how to get all data from nokia E71 to i5s???
if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.
-
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant
Maybe you are looking for
-
STATUS BAR AT DIFFRENT POSITIONS
Hi to all, i have the following problem: The first call to a form modul shows the status bar/message line at the bottom of the applet window. After exit_form and calling the same module again status bar/message line is shown at the bottom of the form
-
Down payment request for assets using bapi_acc_document_post
Hi guys(girls)!, I<< priority reduced >> I'm posting a down payment request to an asset with a z program using bapi_acc_document_post. Everything is fine, but, when i go to fb03 to check the generated document i don't see the asset number associated
-
Anyone try larger (600-750G or higher) internal drives?
Have any new Mac Pro owners tried internal drives larger than the 500GB Apple-supplied drives? The 750GB Seagate, for example? I find my dual 2.5GB GB Mac does not handle larger external drives well, even with an extra PCI card wth added Firewire 800
-
I want to upgrade to an iPhone5 and need to backup my contacts to my PC. How can I do this?
-
How to dislpay image in frame???
I tried displaying image in a lable But it shows only a part of the image. Is there any function to resize a jpg file and display?