How to map idoc segments to multiple output structures

Dear experts,
On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
Idoc structure is as follows:
- 1 header segment
- 1..n detail segments (which I need to map to outputstructure 1)
- 1 summarisation segment (which I need to map to outputstructure 2)
Output needs to be a .txt file.
I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
Thanks in advance,
William

Hi
You can do 1:n multimapping
in message mapping in messages tab ..add both the structures in target tab and do the mapping
and in operation mapping add both the message interface on the target side
PLease go through this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Similar Messages

How to map idoc segment field E1IDB02-FIIKONTO with BSEG-ESRNR.

Hi,
I have searched for lot of threads in the forum , and also i tried myself but i am not able to map this fields segment with my logic, so please anyone kindly contribute in mapping idoc segment field with the logic given below:
idoc type :PAYEXT outbound idoc.
message type: PEXR2002
This is my logic: i need to populate the ISR number(BSEG-ESRNR ) in idoc segment field( E1IDB02-FIIKONTO)
DATA : str1 TYPE string,
      len1 TYPE i,
      len2 TYPE i,
      str2 TYPE string,
      str3 TYPE string.
str1 = '01-1234-4'. ---> BSEG-ESRNR "ISR Subscriber Number
REPLACE FIRST OCCURRENCE OF '-' IN str1 WITH '_'.
REPLACE ALL OCCURRENCES OF '-' IN str1 WITH space.
CONDENSE str1.
len1 = STRLEN( str1 ).
IF len1 LT '9'.
len2 = '9' - len1.
CASE len2.
   WHEN '1'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '00'.
   WHEN '2'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000'.
   WHEN '3'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0000'.
   WHEN '4'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000000'.
   WHEN OTHERS.
ENDCASE.
ELSEIF len1 EQ '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0'.
ELSEIF len1 GT '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH space.
CONDENSE str1.
ENDIF.
Thanks in Advance.

Resolved.

How to map IDoc segment with qualifiers

Hi everyone!
I have the following problem: In an IDoc of type DESADV01 there can be several segments of type E2EDS01. Each segment has a different qualifier, which is the value of the field SUMID in this case. My target structure (type EDIFACT) now has several segments, each again with a sort of qualifier. Now I have to map the values of certain source segments to the respective target segments.
Exaple (in XML format):
Source
<E1EDS01 SEGMENT="1">
 <SUMID>021</SUMID>
 <SUMME>0000000001.000</SUMME>
 <SUNIT>KGM</SUNIT>
</E1EDS01>
<E1EDS01 SEGMENT="1">
 <SUMID>022</SUMID>
 <SUMME>0000000001.000</SUMME>
 <SUNIT>KGM</SUNIT>
</E1EDS01>
Target
<S_MEA>
 <C_C502>
 <D_6313>N</D_6313>
 </C_C502>
 <C_C174>
 <D_6411>KGM</D_6411>
 <D_6314>1</D_6314>
 </C_C174>
</S_MEA>
<S_MEA>
 <C_C502>
 <D_6313>G</D_6313>
 </C_C502>
 <C_C174>
 <D_6411>KGM</D_6411>
 <D_6314>1</D_6314>
 </C_C174>
</S_MEA>
(i have omitted several details here, but I'm only interested in the general procedure anyway).
So in general the source segment with qualifier "021" should be mapped to a target structure with qualifier "N" etc.
How can this be done using standard XI mapping techniques?
Regards, Joerg

Hi everyone!
Thanks for your input data - unfortunately this wasn't quite what I was looking for. However I thik I solved my original problem and I just wanted to share this solution with you - maybe it helps others, maybe some of you have suggestions what I could do differently.
To sum up the requirement: There can be multiple input segments, each with a certain qualifier. These input segments have to be mapped to the target segments, respectively - however, the qualifiers change. There can be several segments with qualifiers that do not match the requirement, and required segments might be missing.
So here's what I came up with:
Use the qualifier of the source segments as an input to a FixValues function. In this function, map the desired qualifiers to the value true, use false as the default value. Map the output of the FixValues function to a createIf function and use this to create the desired output segment. This way, for each of the required segments, one target segment will be created. All other segments (with unwanted qualifiers) will be removed.
So far, this technique worked for me - do you have improvements/suggestions?
Regards, Joerg

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

How to get IDOC segment occurence

Hi All,
I am trying out IDOC to File scenario and facing a problem due to repetition of segments in IDOC.
Requirement is to repeat the field in output file base on the segment occurance.
i am trying to map the record set of target file structure to the most repeating segmetn in the Souce IDOC so that i can get the repetion.
Is there any way to identify which segments repeats the most of times?
can we map a segment to target record set in where in we count all the segment occurance and get the most repeating segment and map it to target in udf itself.
is there any direct function whcih can be used in UDF to map one segment to a recordset?
Regards,
Anika

1. use the wiki logic on each repeating node
2. that will give you the counts for each repeating node
3. now write a node with each count as input
4. check which is the maximum
5. then use a logic as below
assume that max_occurance variable contains the maximum repeating nodes count
then
for(int i = 0; i < max_occurance; i++)
result.addValue("");
use that UDFs output and it will create that many occurances on the target side

How to Map Idoc-Orders05 Qualifier permitted values to a flat file Str

Hi All,
My scenario is IDoc-xi-flat file. I have a problem in mapping the respective qualifier value in IDoc to the flat file structure. I am using the function fix values in Message Mapping. Suggest how should the target field should look like to map to the qualifier.
Thanks
Gowri K.

hi,
can you tell a little bit more on what are you trying to achive?
do you only need one qualifier in file or all or what?
can you use the same structure as in IDOC ?
be a little more precise
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to map expdp parallele process to output file

How to map expdp parallel process to its output file while running...
say i use expdp dumpfile=test_%U.dmp parallel=5 ..
Each parallele process writing to its related output file.. i want to know the mapping in run time...

I'm not sure if this information is reported in the status command but it's worth a shot. You can get to the status command 2 ways:
if you are running a datapump job from a terminal window, then while it is running, type ctl-c and you will get the datapump prompt. Either IMPORT> or EXPORT>
IMPORT> status
If you type status, it will tell you a bunch of information about the job and then each process. It may have dumpfile information in there.
If you run it interactively, then you need to attach to the job. To do this, you need to know the job name. If you don't know, you can look at sys.dba_datapump_jobs if prived, or sys.user_datapump_jobs if not prived. You will see a job name and a schema name. Once you have that, you can:
expdp user/password attach=schema.job_name
This will bring you to the EXPORT>/iMPORT> prompt. Type status there.
Like I said, I'm not sure if file name information is specified, but it might be. If it is not there, then I don't know of any other way to get it.
Dean

How to Map IDOC Extensions in LSMW

HI,
I am working on a conversion for uploading material master using IDOC Method, There is an extension in the IDOC can anyone tell me how to map the extensions in the LSMW.
ADVANCE Thanks
Guhapriyan Subrahmanyam

Hi guhapriyan,
if you have any extension associated with MATMAS then it will display when you press F4 on extension, form the list you can choose the extension.
and proceed ....
the extension is for custom fields ,for this you need extend the idoc. if you add the extension to it, in lsmw extension you can see them...
Regards
vijay

How to populate IDOC segments...

Hello Experts,
I was just tasked to add new fields in an IDOC segment. My question is, how do I populate
those newly created fields? The data will be coming from a purchase order.
Thank you guys and take care!

Hi,
U cannot edit the existing segment u have to create a zsegment with the fields and then under the main segment u have to add this new segment..also u have create a extended idoc in ur case...then only u can add this new segment..also once u create a segment u have to release it...
u have to write the code in the userexit only...
check the sample code which i have done for my requirement for sales order..
*& Include           ZXVEDU02
Program:        Function Module:EXIT_SAPLVEDC_002     Creation Date: 12-04-2006          *
Program Type : Outbound IDOC Enhancement                                                *
Program Description:OutBound IDOC Enhancement                                            *
Modification ID:001                                                                      *
Date         : 25-05-2006                                                                *
Description : 1.The sales organization master data needs to be sent as supplier party
                 details.New segment ZZSALORG is created and attached to the parent
                 segment E1EDK01
               2.Data required to be sent are:
                  1.NAME1- Sales organization name
                  2.STRAS- Address
                  3.TELFX- Fax number
                  4.TELF1- phone number.
               3.ZZSALORG is filled with the above information.
Modification ID:002                                                                      *
Date         : 09-06-2006                                                                *
Description : A new field zstceg added to the segment zzdochdr and it was populated     *
                by selecting stceg field from Kna1 table                                 *
Modification ID:001                                                                      *
Date         : 15-06-2006                                                                *
Description : 1.New segment ZZE1EDP01 is created and attached to the parent segment E1EDP01
               2.Data required to be sent are:
                  1.POSEX- Item number
                  2.UEBTO- Overdelivery tolerance
                  3.UNTTO- Underdelivery tolerance
               3.ZZE1EDP01 is filled with the above information.
*-- Data Declaration--
*-- Constant Declaration--
CONSTANTS: c_1(1)          TYPE c VALUE '1',
           c_langu         LIKE t005t-spras VALUE 'E',
           c_parvw         LIKE vbpa-parvw VALUE 'RG',
           c_e1edk01(7)    TYPE c VALUE 'E1EDK01',
           c_e1edk02(7)    TYPE c VALUE 'E1EDK02',
           c_e1edk17(7)    TYPE c VALUE 'E1EDK17',
           c_e1edka1(7)    TYPE c VALUE 'E1EDKA1',
           c_e1edk14(7)    TYPE c VALUE 'E1EDK14',
           c_004(3)        TYPE c VALUE '004',
           c_001(3)        TYPE c VALUE '001',
           c_002(3)        TYPE c VALUE '002',
           c_re(2)         TYPE c VALUE 'RE',
           c_we(2)         TYPE c VALUE 'WE',
           c_ag(2)         TYPE c VALUE 'AG',
           c_0010(4)       TYPE c VALUE '0010',
           c_zzdochdr(8)   TYPE c VALUE 'ZZDOCHDR',
           c_ze1edk02(8)   TYPE c VALUE 'ZE1EDK02',
           c_zze1edk17(9) TYPE c VALUE 'ZZE1EDK17',
           c_zze1edka1(9) TYPE c VALUE 'ZZE1EDKA1',
           c_pe(2)         TYPE c VALUE 'PE',
           c_y(1)          TYPE c VALUE 'Y',
           c_zze1email(9) TYPE c VALUE 'ZZE1EMAIL',
           c_zzsalorg(8)   TYPE c VALUE 'ZZSALORG',
           c_zze1edp01(9) TYPE c VALUE 'ZZE1EDP01',
           c_e1edp01(7)   TYPE c VALUE 'E1EDP01'.
*-- Variables Declaration--
DATA: lv_vbeln   LIKE vbak-vbeln,
      lv_country LIKE t005t-landx,
      lv_text1   LIKE t042z-text1,
      lv_vzskz   LIKE knb1-vzskz,
      lv_inco    LIKE tinct-bezei,
      lv_cadnr   LIKE akkp-cadnr,
      lv_pernr   LIKE pa0105-pernr,
      lv_parvw   LIKE tpar-parvw,
      lv_adrnr   LIKE tvko-adrnr,
      lv_zinso   LIKE t056z-zinso,
Begin of Mod-002
      lv_stceg   TYPE stceg.
End of Mod-002
Begin of MOD-003
     lv_min_tol TYPE KWMENG,
     lv_max_tol TYPE KWMENG.
End Of MOD-003
TYPES:BEGIN OF t_vbfa,
        vbelv LIKE vbfa-vbeln,
        erdat TYPE erdat,
      END OF t_vbfa.
DATA: i_akkp TYPE akkp.
*-- WorkArea Declaration--
DATA : wa_zdochdr   TYPE zzdochdr,
       wa_ze1edk02 TYPE zze1edk02,
       wa_ze1edk17 TYPE zze1edk17,
       wa_zze1email TYPE zze1email,
       wa_zzsalorg TYPE zzsalorg,
       wa_zze1edp01 TYPE zze1edp01,
       wa_e1edk02   TYPE e1edk02,
       wa_e1edk17   TYPE e1edk17,
       wa_e1edka1   TYPE e1edka1,
       wa_e1edk01   TYPE e1edk01,
       wa_e1edp01   TYPE e1edp01,
       wa_adrc      TYPE adrc,
       wa_pa0105    TYPE pa0105,
       wa_zze1edka1 TYPE zze1edka1,
       wa_zzdochdr TYPE zzdochdr,
       wa_vbfa      TYPE t_vbfa,
       wa_vbpa      TYPE vbpa.
*-- Move data to ZZDOCHDR Segment--
CASE int_edidd-segnam.
WHEN c_e1edk01.
    MOVE int_edidd-sdata TO wa_e1edk01.
*--Begin of MOD001+(Modification ID 001)--
*-- Filling of ZZSALORG segment--
    SELECT SINGLE adrnr
    FROM tvko
    INTO lv_adrnr
   WHERE vkorg EQ dxvbak-vkorg.
    IF sy-subrc EQ 0.
      SELECT SINGLE *
               FROM adrc
               INTO wa_adrc
              WHERE addrnumber EQ lv_adrnr.
      wa_zzsalorg-salorg = dxvbak-vkorg.
      wa_zzsalorg-name1   = wa_adrc-name1.
      wa_zzsalorg-name2   = wa_adrc-name2.
      wa_zzsalorg-stras   = wa_adrc-street.
      wa_zzsalorg-telf1   = wa_adrc-tel_number.
      wa_zzsalorg-telfx   = wa_adrc-fax_number.
      wa_zzsalorg-land1   = wa_adrc-country.
      wa_zzsalorg-strs2   = wa_adrc-str_suppl1.
      wa_zzsalorg-street2 = wa_adrc-str_suppl2.
      wa_zzsalorg-street3 = wa_adrc-str_suppl3.
      wa_zzsalorg-ort01   = wa_adrc-city1.
      wa_zzsalorg-pstlz   = wa_adrc-post_code1.
      wa_zzsalorg-regio   = wa_adrc-region.
      int_edidd-segnam = c_zzsalorg.
      CLEAR int_edidd-sdata.
      MOVE wa_zzsalorg TO int_edidd-sdata.
      APPEND int_edidd.
      CLEAR: wa_adrc,
             wa_zzsalorg.
    ENDIF.
*--End of MOD001+(Modification ID 001)--
    SELECT SINGLE text1
             FROM t042z
             INTO lv_text1
             WHERE land1 EQ dxvbpa-land1
               AND zlsch EQ dxvbkd-zlsch.
    READ TABLE dxvbpa INTO wa_vbpa WITH KEY vbeln = dxvbpa-vbeln
                                      parvw = c_parvw.
    IF sy-subrc EQ 0.
Begin of Mod-002
      SELECT SINGLE stceg
      FROM kna1
      INTO lv_stceg
       WHERE kunnr = wa_vbpa-kunnr.
End of Mod-002
      SELECT SINGLE vzskz
               FROM knb1
               INTO lv_vzskz
               WHERE kunnr EQ wa_vbpa-kunnr
                 AND bukrs EQ dxvbak-bukrs_vf.
      IF sy-subrc EQ 0.
        SELECT SINGLE zinso
                 FROM t056z
                 INTO lv_zinso
                 WHERE vzskz EQ lv_vzskz
                   AND waers EQ wa_e1edk01-curcy.
        wa_zzdochdr-zdoctitle = dobject-objky.
        wa_zzdochdr-zdate      = dobject-erdat.
        wa_zzdochdr-zmestyp    = dobject-kschl.
        wa_zzdochdr-zmedium    = dobject-nacha.
        wa_zzdochdr-zlang      = dobject-spras.
        wa_zzdochdr-zttype     = dxvbkd-kdkg1.
        wa_zzdochdr-zpaymethod = dxvbkd-zlsch.
        wa_zzdochdr-zpaytext   = lv_text1.
        wa_zzdochdr-zintonpymt = lv_zinso.
Begin of Mod-002
        wa_zzdochdr-zstceg     = lv_stceg.
End of Mod-002
        int_edidd-segnam = c_zzdochdr.
        CLEAR int_edidd-sdata.
        MOVE wa_zzdochdr TO int_edidd-sdata.
        APPEND int_edidd.
        CLEAR : wa_zzdochdr.
      ENDIF.
    ENDIF.
*-- Move data to ZZE1EDK02 Segment--
WHEN c_e1edk02.
    MOVE int_edidd-sdata TO wa_e1edk02.
    IF wa_e1edk02-qualf EQ c_004.
      SELECT SINGLE vbelv FROM vbfa INTO wa_vbfa
                         WHERE vbeln EQ lv_vbeln
                         AND   vbtyp_v EQ 'B'.
      IF sy-subrc EQ 0.
        SELECT SINGLE erdat FROM vbak INTO wa_vbfa
        WHERE vbeln EQ wa_vbfa-vbelv.
        int_edidd-segnam = c_ze1edk02.
        CLEAR int_edidd-sdata.
        MOVE wa_vbfa TO int_edidd-sdata.
        APPEND int_edidd.
        CLEAR wa_vbfa.
      ENDIF.
    ENDIF.                                  " IF ended for "IF wa_e1edk02-qualf = '004'" condition.
**-- Move data to ZZE1EDK17 Segment--
WHEN c_e1edk17.
    MOVE int_edidd-sdata TO wa_e1edk17.
    IF NOT dxvbkd-lcnum IS INITIAL.
      SELECT SINGLE inco1
                    inco2
               FROM akkp
               INTO i_akkp
              WHERE lcnum EQ dxvbkd-lcnum.
      IF sy-subrc EQ 0.
        IF wa_e1edk17-qualf EQ c_001.
          wa_ze1edk17-lkond = i_akkp-inco1.
          wa_ze1edk17-qualf = wa_e1edk17-qualf.
          SELECT SINGLE bezei
                   FROM tinct
                   INTO lv_inco
                  WHERE spras EQ 'E'
                    AND inco1 EQ i_akkp-inco1.
          IF sy-subrc EQ 0.
            wa_ze1edk17-lktext = lv_inco.
          ENDIF.
        ELSEIF wa_e1edk17-qualf EQ c_002.
          wa_ze1edk17-qualf = wa_e1edk17-qualf.
          wa_ze1edk17-lktext = i_akkp-inco2.
        ELSE.
        ENDIF.
        int_edidd-segnam = c_zze1edk17.
        CLEAR int_edidd-sdata.
        MOVE wa_ze1edk17 TO int_edidd-sdata.
        APPEND int_edidd.
        CLEAR wa_ze1edk17.
      ENDIF.
    ENDIF.                                       " IF ended for not initial condition.
*--Move data to zze1edka1 Segment--
WHEN c_e1edka1.
    MOVE int_edidd-sdata TO wa_e1edka1.
*--Checking the wa_e1edka1-parvw field for 'RE'--
    IF wa_e1edka1-parvw EQ c_re.
      IF NOT dxvbkd-lcnum IS INITIAL.
        SELECT SINGLE cadnr
         FROM akkp
         INTO lv_cadnr
        WHERE lcnum EQ dxvbkd-lcnum.
        IF sy-subrc EQ 0.
          SELECT SINGLE *
                   FROM adrc
                   INTO wa_adrc
                  WHERE addrnumber EQ lv_cadnr.
          wa_zze1edka1-parvw = wa_e1edka1-parvw.
          wa_zze1edka1-partn = wa_e1edka1-partn.
          wa_zze1edka1-land1 = wa_adrc-country.
          wa_zze1edka1-name1 = wa_adrc-name1.
          wa_zze1edka1-name2 = wa_adrc-name2.
          wa_zze1edka1-stras = wa_adrc-street.
          wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
          wa_zze1edka1-ort01 = wa_adrc-city1.
          wa_zze1edka1-pstlz = wa_adrc-post_code1.
          wa_zze1edka1-regio = wa_adrc-region.
          int_edidd-segnam = c_zze1edka1.
          CLEAR int_edidd-sdata.
          MOVE wa_zze1edka1 TO int_edidd-sdata.
          APPEND int_edidd.
          CLEAR: wa_adrc,
                 wa_zze1edka1.
        ENDIF.
      ENDIF.
    ENDIF.                                               " IF ended for "IF wa_e1edka1-parvw EQ 'RE'" condition.
*--Checking the wa_e1edka1-parvw field for 'WE'--
    IF wa_e1edka1-parvw EQ c_we.
      IF NOT dxvbkd-lcnum IS INITIAL.
        SELECT SINGLE cadnr
          FROM akkp
          INTO lv_cadnr
         WHERE lcnum EQ dxvbkd-lcnum.
        IF sy-subrc EQ 0.
          SELECT SINGLE *
                   FROM adrc
                   INTO wa_adrc
                  WHERE addrnumber EQ lv_cadnr.
          wa_zze1edka1-parvw = wa_e1edka1-parvw.
          wa_zze1edka1-partn = wa_e1edka1-partn.
          wa_zze1edka1-land1 = wa_adrc-country.
          wa_zze1edka1-name1 = wa_adrc-name1.
          wa_zze1edka1-name2 = wa_adrc-name2.
          wa_zze1edka1-stras = wa_adrc-street.
          wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
          wa_zze1edka1-ort01 = wa_adrc-city1.
          wa_zze1edka1-pstlz = wa_adrc-post_code1.
          wa_zze1edka1-regio = wa_adrc-region.
          int_edidd-segnam = c_zze1edka1.
          CLEAR int_edidd-sdata.
          MOVE wa_zze1edka1 TO int_edidd-sdata.
          APPEND int_edidd.
          CLEAR: wa_adrc,
                 wa_zze1edka1.
        ENDIF.
      ENDIF.
    ENDIF.                                             " IF ended for "IF wa_e1edka1-parvw EQ 'WE'" condition.
*--Checking the wa_e1edka1-parvw field for 'AG'--
    IF wa_e1edka1-parvw EQ c_ag.
      IF NOT dxvbkd-lcnum IS INITIAL.
        SELECT SINGLE cadnr
          FROM akkp
          INTO lv_cadnr
         WHERE lcnum EQ dxvbkd-lcnum.
        IF sy-subrc EQ 0.
          SELECT SINGLE *
                   FROM adrc
                   INTO wa_adrc
                  WHERE addrnumber EQ lv_cadnr.
          wa_zze1edka1-parvw = wa_e1edka1-parvw.
          wa_zze1edka1-partn = wa_e1edka1-partn.
          wa_zze1edka1-land1 = wa_adrc-country.
          wa_zze1edka1-name1 = wa_adrc-name1.
          wa_zze1edka1-name2 = wa_adrc-name2.
          wa_zze1edka1-stras = wa_adrc-street.
          wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
          wa_zze1edka1-ort01 = wa_adrc-city1.
          wa_zze1edka1-pstlz = wa_adrc-post_code1.
          wa_zze1edka1-regio = wa_adrc-region.
          int_edidd-segnam = c_zze1edka1.
          CLEAR int_edidd-sdata.
          MOVE wa_zze1edka1 TO int_edidd-sdata.
          APPEND int_edidd.
          CLEAR: wa_adrc,
                 wa_zze1edka1.
        ENDIF.
      ENDIF.                                       " IF ended for "IF NOT dxvbkd-lcnum IS INITIAL" condition.
    ENDIF.                                         " IF ended for "IF wa_e1edka1-parvw EQ c_ag" condition.
*--Checking the wa_e1edka1-parvw field for 'Y'--
    IF wa_e1edka1-parvw+0(1) EQ c_y.
      SELECT SINGLE parvw
              FROM tpar
              INTO lv_parvw
              WHERE parvw EQ wa_e1edka1-parvw
                AND nrart EQ c_pe.
      IF sy-subrc EQ 0.
        SELECT SINGLE pernr
          FROM vbpa
          INTO lv_pernr
          WHERE vbeln EQ dxvbpa-vbeln
          AND   parvw EQ lv_parvw.
        IF sy-subrc EQ 0.
          SELECT SINGLE usrid_long
           FROM pa0105
           INTO wa_pa0105-usrid_long
           WHERE pernr EQ lv_pernr
             AND usrty EQ c_0010.    " communication type email
          wa_zze1email-zparvw = wa_e1edka1-parvw.
          wa_zze1email-zname   = wa_e1edka1-name1.
          wa_zze1email-zemail = wa_pa0105-usrid_long.
          int_edidd-segnam = c_zze1email.
          CLEAR int_edidd-sdata.
          MOVE wa_zze1email TO int_edidd-sdata.
          APPEND int_edidd.
          CLEAR: wa_adrc,
                 wa_zze1email,
                 wa_pa0105.
        ENDIF.
      ENDIF.
    ENDIF.                              " IF ended for "IF wa_e1edka1-parvw EQ 'Y'" condition.
*--Begin of MOD003 (Modification ID 003)--
*-- Move data to ZZE1EDP01 Segment--
WHEN c_e1edp01.
    MOVE int_edidd-sdata TO wa_e1edp01.
    wa_zze1edp01-posex = wa_e1edp01-posex.
     wa_zze1edp01-uebto = dxvbap-kwmeng + ( dxvbap-kwmeng * dxvbap-uebto / 100 ).
     wa_zze1edp01-untto = dxvbap-kwmeng - ( dxvbap-kwmeng * dxvbap-untto / 100 ).
    wa_zze1edp01-uebto = dxvbap-uebto.
    wa_zze1edp01-untto = dxvbap-untto.
    int_edidd-segnam = c_zze1edp01.
    CLEAR int_edidd-sdata.
    MOVE wa_zze1edp01 TO int_edidd-sdata.
    APPEND int_edidd.
    CLEAR: wa_zze1edp01.
*--End of MOD003 (Modification ID 003)--
WHEN OTHERS.
ENDCASE.
Regards,
Nagaraj

How to assign idoc segment at runtime ??

Hi ,
I have a ztable which is maintained via sm30.
The field1 is a key field and other fields are idocsegment name , idoc field , field value .
Field1 = key field
idoc segment name (field2)
idoc field (field3)
field value(field4)
How do i update idoc segment and particular field with field4 at runtime .
segment name , field and value changes with the matching key field.
loop at it_edidd into wa_edidd
 where segnam = wa_ztable-idoc_segment.
wa_seg = wa_edidd-sdata.
how to assign the field at runtime ?????????????????????????
how to change the value of field ?????????????????????????
 update edid4 set sdata = wa_seg
 where docnum = wa_edidd-docnum
 and segnum = wa_edidd-segnum
 and segnam = wa_edidd-segnam.
 if sy-subrc <> 0 .
 rollback work .
 write: / wa_edidd-docnum .
 else.
 commit work.
 endif.
endloop.
Please help me with the above code .
Regards,
Rachel

Hello Rachel
You could do this the following way:
DATA: ls_edidd TYPE edidd,
 ld_idx TYPE i.
FIELD-SYMBOLS:
<ls_segment> TYPE any,
<ld_field> TYPE any.
LOOP AT it_edidd INTO ls_eddid
 WHERE ( segnam = wa_ztable-idoc_segment ).
ld_idx = syst-tabix.
ASSIGN ls_edidd-sdata TO <ls_segment> CASTING TYPE (ls_edidd-segnam). " <<<
ASSIGN COMPONENT wa_ztable-field3 OF STRUCTURE <ls_segment>
 TO <ld_field>.
<ld_field> = wa_ztable-field4.
MODIFY it_edidd FROM ls_edidd INDEX ld_idx.
ENDLOOP.
However, be aware that your logic might fail in case of repetitive segments.
Regards
Uwe

How to Read Idoc - Segment fields values and status messages

Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
Kumar

You need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    MSG_ID   = EDIDS-STAMID
    MSG_NO   = V_MSGNO
    MSG_VAR1 = EDIDS-STAPA1
    MSG_VAR2 = EDIDS-STAPA2
    MSG_VAR3 = EDIDS-STAPA3
    MSG_VAR4 = EDIDS-STAPA4
IMPORTING
    MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a®

HOW TO MAP IDOC TO XML

Hi,
I need to map IDOC to xml but the problem is I have 400 fields in IDOC which are to be mapped to 20 elements in XML.
As it a tedious process to go to 400 fields for each xml element.Is their any better way to find correct field in IDOC with very minial time rather going 400 fields for each xml element.
thanks
sreeram

hi,
>>1)Even SAP it self does not encourage to use ABAP >>MAPPING and
i dont know where you have read this, but ABAP mapping is one of the most popular/ most efficient and highly recomended by SAP. I have used it in tons of places.
>>2)More over Iam not ABAP resource.
you could also do a java mapping.
there is no other easy way if you are not doing abap/java mapping. you are then left with the only option of using the graphical editor.
cheers,
Naveen
Message was edited by: Naveen Pandrangi

RE: How to change Idoc segment data

Hi folks,
I have a requirement where in I have a Inbound DELIN Idoc in the SAP system. When I am reprocessing the same Idoc through WE19 by changing the delivery schedule and then changing the E1EDP16-WMENG value in runtime while debugging, the same is getting updated in correponding SDSA but when the new Idoc is getting triggered, only previous old Idoc value is getting reflected.
Kindly suggest!!!!
Vishal.

No I dont want to change the value in WE19.... In runtime I am changing the value of schedule Line quantity and the same is getting update in SDSA also but when a new idoc is getting created that value is not getting reflected in that Idoc segment field.
Kindly suggest.

Leaving mapped idoc segments out of plain text output

Hello all,
I mapped a customer IDoc with one header and detail lines to a message maping with one header and detail lines. The value's in the header are used for variable substitution for the file name.
The has to be writen as csv to a ftp server. I do this by using the file content conversion. Now I only want the detail lines to be written to the file so I only mensioned the detail line as the record set structure.
When I look at the output the header is stil part of the csv file.
Is there a way to prevent the header line being part of the output ? (of course without deleating it from the message type structure)
Regards,
Jasper

check this link
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
Try Using the following
Customer.addHeaderLine = 0
Customer is the structure here.
Reward if helpful.
Sachin

IDOC segment with multiple lines

Hi,
I have a requirement where I need to populate the multiple lines in one segment without getting created multiple segment.
I am generating material with multiple line data in the additional data using MATMAS05 IDOC for segment E1MTXHM but its generating multiple sub segments. I need to have multiple lines in one segment and not multiple segment.
Please let me know how to achieve multiple lines in one segment.
Thanks & Regards,
Rayan

Hi Subas,
I haven written any code as I am triggering IDOC through BD10. This is a testing requirement and we need any IDOC irresepective of MATMAS, DEBMAS, CREMAS etc etc which can have multiple lines in a single segemnt.
Sample IDOC:
Z2XXXXD000                                       00002300002203CTDI-PA
90210 Testing Address
CA
Beverly Hills
United States
Z2XXXD000                                       00002400002203ON TESTING
303 308 5319
Z2XXXXC000                                       00002500000102Z004E
Actually every IDOC I am generating is getting multiple segment and each segment holding one line and my requirement is that all the lines should be get accomadated in a single segment like the above sample IDOC.
Actually each segment has segment name and IDOC no. followed by field values but my requirement is within one segment name and IDOC no. all the field values get accomadated. Hope you got the understanding of what my requirement is? Please guide me how to trigger multiple line in a segment.
Thanks & Regards,
Rayan

How to map idoc segments to multiple output structures

Similar Messages

Maybe you are looking for