How to map services for Implementation Project

Hii
its an implementation project
Client is providing normal sales and services ( Job work ) also
for that purpose how we can map services in SAP SD
1 ) by creating different sales org (services)
or
2 ) by creating different doc type for services
which 1 is better
ThanX

HI,
Service document is most better.......b'coz you will get efficient reports thr this...and you ccan maintain Diff Pricing procedure for this....
Regards
Raj

Similar Messages

How implemenataion process going for a project in an orgn?

hi friends
i am deva
how implemenataion process going for a project in an orgn?

Dear Deava,
During an implementation project you follow 5 phase.
1.Project preparation: In this you will know your team members and you will have kick meeting. You will decide the time frame for the project also.
2.Blue print: In this stage you will map the business scenarion.The client will give the requirement(AS-IS) and you will map in sap(TO-BE). If there is any development you need to do the GAP analysis.
3.Realization/Testing:In this stage you will configure in the development server and test the configuration you have made in quality server.
4.Final preparation: In this stage your configuration is done . You will get the sign off from project manager.
5.Go live & Support: In this stage you will upload all your developments in the production server.Then you will golive and stay in the client place for sometime for support and solving few queries.
The above 5 stages are followed in any project.
If your happy with the answer award point for me
Regards,
R.Francis Noel Manoj

How to Map Fomulas for Float Glass Process

Hi All,
Can anybody suggest how to map formulas for float glass process.
As in float Glass process continuous production is going on single line, within that continuous ingredients are added in furnace and molten glass mass is coming out. this molten glass is now adjusted to particular thickness and then finally cut into specific sizes as per cusotmer requirment.
Final product is in various thickness, width and length.
Entire process is automated.
If anybody already implemented same scenario, please share knowledge.

Hi
The following is the mapping process and it is tricky process need to map carefully.
You can define this as a single formula.
Output: Packed - cut to size - Finished Good Item.
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Packaging materials + Labels + Boxes etc.
Define Routing:
Resource: Furnace, Any other importance resource like Equipment that controls thickness, cutter etc, Labor, Associated Overhead
Create recipe using the formula and routing.
Various factors that can affect the mapping:
1) Formula maintenance: You have to define formula for each output item.
2) Possibility of dynamic determination of output item: If it is possible to produce different combination of thickness/width (and hence different FG item) in the same batch, then this won't be the right mapping.
3) Process variations: Also formula mapping depends on how accurate is production process. If user wants to produce item X (say thickness 10mm) but due to quality issue produced item Y (say thickness 9mm) and such cases happens very often, this won't be right solution.
4) Inventory measurement: This will determine the break-points. If you cannot measure the quantity (or even estimate) then you cannot define it as an intermediate item.
I will explain how point 4 can lead to different way of formula mapping.
Say you have a furnace that needs to run continuously for better quality or throughput. Hence you will be continuously adding raw materials to furnace and produce different outputs. You can break the single formula into multiple formulas as -
Formula 1) Output: Molten mass of glass
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Formula 2) Output: Packed - cut to size - Finished Good Item.
Input: Molten mass of glass
To have formula in such fashion you should have a way to measure or estimate the weight of Molten mass of glass.
If you are estimating the weight, there should be historical data available to determine what should be realistic output quantity for given input quantity. How much will be process loss and loss due to unwanted by product such as slag etc.
Further you can break formula 2 as
Output: One large sheet of give thickness
Input: Molten mass of glass
Output: Packed - cut to size - Finished Good Item.
Input: The large sheet of give thickness.
This kind of different mapping is possible which normally depends on:
1) Complexity of process
2) How complex BOM structure user wants to have
3) Are there any benefits of maintaining such complex system - like accurate costing or accurate production monitoring or facilitating planning process.
4) Can user maintain the complex system? Are they ready to capture data at finer level. Is it possible to capture the data.
5) And most important thing is how to handle exceptions. If every thing goes smoothly as planned (less exceptions) then user can have and afford any level of complexity. But if there are many exceptions to the normal process you have to concentrate more on how to handle the exceptions.
6) Satisfy all users: Accounting, Planning, Production, Quality, Inventory handling. Formula/Recipe touches all these modules.
Regards
Raj
Sierra

How to add services for object in ECC6.0

Hi everybody,
Can anybody tell me how to add "Services for Object" icon in ECC 6.0 because this icon is there in 4.6C but not coming in ECC 6.0.
Thanks in Advance

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Technology P2P with JAVA (How can i do for implement this tech with JAVA B)

Thanks for read this message,,, I will glad with you if you can help me...
I would like desing, make, build, a point to point aplication with JAVA Builder, I have been reading about sockets but its not enought,,,,,,
can you help me????
Thanks

Well , thanxs for take attention,,,
I need some information about Point to Point tech because I would like to make an aplication with JAVA Builder...
First step is to know how works the point to point...could you give me some links?
Second step is to know how can I do for implement this tech?
Third step is to know Is Java Builder the most indicate languaje for this aplication?
Fourth step is - if Java Buider is the indicate tool, What have to know for make the aplication?
Well,,I dont speak english very well but is the best that i can do?
BYE

CHARM- No task list found for implementation project

Hi All,
I created an implementation project, and created a task list for the implementation project.
But when i create a change request with normal correction, The Task list is not getting displayed.
I am facing a conflict also, When i directly create a correction document without creating a change request. I am getting the task list for implementation project.
Why is it am getting the task list for Implementation project in correction document and not in change request.
When i tried to explore. found that in change request it is getting the list of maintenance cycles(Maintenance projects) and not the tasklist for other type of projects.
Our customized flows are all dependent on the change request. So Is there any configuration i can do to get the task list of implementation project also in the list.
Kindly guide on this issue.
Thanks in advance.
Regards,
Subhashini.

Hi Xavier,
I was also checking that one only.
For the standard transaction type SDCR, it is working perfectly as you toldh when i select development(Implementation).
But the problem is, here we have customized SDCR to ZDCR with our follow up documents.
When i try to include the Code group of implementation(Implmntn), Nothing is happening.
The subject is getting included in the list. but iam getting only the list of maintenance project only.
I have made the changes in copy nsontrol also. but i dont see any difference.
I could not able to trace where exactly i need to do the customizing to bring the list of implementation projects in my change request(ZDCR) when i select the subject( Project-implementation(SDMI))
Kindly advice.
Regards,
Subhashini.

How to create Service PR from Projects in PS module

Dear Friends,
We are doing the customer project, while do executing the projects if any man power is required, customer will send the PO, as per his PO the required Manpower we are procuring (hiring) from our vendor. From our company we are sending this manpower to customer. Here our requirement is we want create a service PO for procuring of these services.
Friends please explain the above process how we need to do through Project Systems.
Regards,
Hari Krishna

hi
use the External Processing activity and create the Service master attach this service master in the service tab of the external processing with quantity and rate. and release the activity
it will create PR based on the setting you make in the network profile.
create PO
Create service entry sheet against the PO
release the service entry sheet
pay the vendor.

How to Get in to Implementation Project

Hi all,
Iam R.Chaitanya, working in Capgemini support and one rollout project for the last 3.5 yrs. In view of saturation (from various points like financial growth, skills growth, insecure future... ), iam looking for change in project. As per my assumption, if i can get in to an implementation project then it will be good enough to continue further. Iam strong in MM configuration, but on simply applying to Jobs, iam not getting reply as i dont have implementation experience earlier.
   Can any one please let me know the way to get in to Implementation project. Any kind of help
   1) How to design the resume
   2) Showing Implementing oppurtunities
   3) Skills to be developed.
   Please advise accordingly.
thanks & regards
Chaitanya Rayaprolu

Hi,
Till now i have not taken part in any implementatio project and i donot feel any diificulties. As far as i know support is much more diffcult than implementation and you can learn more in support projects.
iam not getting reply as i dont have implementation experience earlier.
This is not because of this reason . Nowadays all the requirement has this credential ( Implementation experience) . Dont give much importance to this . Try searching , finally calls will come . Having 3.5 years od experience you should be able analyze and do this yourself
keshav

Solution Manager for Implementation project

Hello,
I want to know how we should use solution manager for an implementation project. I am aware about the ASAP methods and the transactions in solman system for each phase. I have starting trouble like how to and where to start with? My ECC systems are not yet installed. Still we can go ahead with Blueprint creation and definition of roadmaps etc. Currently, it is done on paper. If anybody has done an implementation project through solution manager, could you please give me some hints how to start ? I repeat I am aware of the transactions but dont know what to add there in solar01/02 when the process are not defined/system not installed. Please guide me.
Rajeev

Hi Rajeev,
You're correct; you can start building the Business Blueprint without SMSY having all the systems that are 'to-be'. As long as you enter logical components in the project landscape with the correct product versions, you can replace those with the actual components once they have been installed. The BPR needs those product versions in the blueprint when you load the relevant scenario's. Once loaded, you can start documenting the scenario's, place the processes and process steps not used out of scope or delete them entirely and define custom scenario's, processes and process steps.
When the Blueprint has been completed with relevant design documentation, the Configuration transaction can be used to document how you actually configure the systems and, of course, to configure them from Solution Manager. The system landscape officially has to be definitive at the end of the Blueprint phase, unless you won't be configuring the systems centrally from Solution Manager.
The Solution is actually not necessary for a clean implementation; the Project will eventually lead to the solution. Once the systems are all configured and documented in SSM, you create the Solution and upload the project documentation into it in the Solution Directory.
Let us know how you get on!
Kind regards,
Patrick

How to display service for object (attachment content ) in script

hi all
In me23n we find services for object like attachment, private note, workflow etc...
i need to display the attachment content in script ..
how could i do this ?
any body give your valuable inputs to bring solution.
Regards
deepika

Hi,
Configure it for document type SDIORDER.
sirish

How to add "services for object " in ECC 6.0

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.S

Hi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava.

Change Request Management for Implementation Project

Hello gurus!
I have a problem with execution change request in implementation project.
I have created Implementation project and task list for him."Change request management" is active for this project.
I can create document Change Request, but I can not to create Correction linked with Task plan...
Dmitry.

HI,
Have you verified if your project definition is setup correctly ? Please verify with some of the steps available in the blogs
First steps to work with Change Request Management scenario
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
Change Request Management scenario: Usual questions
https://weblogs.sdn.sap.com/cs/junior/view/wlg/15116
Change Request Management scenario: Working examples
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
Hope this helps.
Cheers
Sh

How to install service for wls 7

How to install NT service for wls 7 instance with pipe symbol (|) as part of
-Dhttp.nonProxyHosts on the CMDLINE ? I'm having trouble with the | symbol on
the command line ?
Thanks,
Jessie

Hi Mark,
Here is the info :
C:\wlsdomains\SSLdomain>set CMDLINE="-hotspot -Xms32m -Xmx200m -Dhttp.proxyHost=
snocache -Dhttp.proxyPort=8080 -Dhttps.proxyHost=snocache -Dhttps.proxyPort=8080
-Dhttp.nonProxyHosts=\" | localhost | *.capgroup.com | SNO* | BRO* | \" -clas
spath \"c:\weblogic7.0.2\jdk131_06\lib\tools.jar;c:\weblogic7.0.2\weblogic700\se
rver\lib\weblogic_sp.jar;c:\weblogic7.0.2\weblogic700\server\lib\weblogic.jar;C:
\Program Files\RadView\WebLOAD5.0\LiveConnect\Classes\" -Dweblogic.Name=SSLserve
r -Dbea.home=\"c:\weblogic7.0.2\" -Dweblogic.management.username=admin -Dweblogi
c.ProductionModeEnabled= -Djava.security.policy=\"c:\weblogic7.0.2\weblogic700\s
erver\lib\weblogic.policy\" weblogic.Server"
'localhost' is not recognized as an internal or external command,
operable program or batch file
| symbol is causing the 'localhost' is not recognized as an internal or external
command error
thanks,
Jessie
"Mark Griffith" <[email protected]> wrote:
What is the exact syntax you are using and what is the "failure/problem"?
Are you using CMD or mks?
cheers
mbg
"Jessie Yau" <[email protected]> wrote in message
news:3efa3b80$[email protected]..
How to install NT service for wls 7 instance with pipe symbol (|) aspart
of
-Dhttp.nonProxyHosts on the CMDLINE ? I'm having trouble with the |symbol
on
the command line ?
Thanks,
Jessie

How to map services for Implementation Project

Similar Messages

Maybe you are looking for