How to map the all forms/reports server?

Hi all,
in our environment we are having 5 windows (o/s)forms server the problem is for everytime if we deploy
a new forms and reports we need it deploy it on all servers. some times we might not deploy in one node . so it would been a problem for us. so is there anyway to do it automatized like if i deploy it one node immediately it ll reflect all the rest nodes in one shot (to avoid the deploy in all nodes)
first we have to stop the services
second we have to deploy in one node and needs to be reflect in all nodes
third start the services in one nodes (it ll reflect in all nodes)
Do u have any idea about this. pls share it
Thanks in advance
Regards
Murali...

Hi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M

Similar Messages

PFRD 11.1.1.4 - How to stop the In-process Reports Server

I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:

in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
Paulo

Thanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo

How to find the jobs in reports server queue

Hi All,
I am using oracle forms & reports 10g and Oracle application server is 10g.
Here we have 100 reports servers, so using this URL we can able to find a particular report server.
http://dhabiapp1.dof.ae:8080/reports/rwservlet/showjobs?server=auh_1
Is there any possibilities to find all the reports server in a single page.
Thanks & Regards
Srikkanth.M

Hi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M

How can have the name of report server

Hi,
There is a method or a statement to obtain the name of the report server, in order to use it a script?
Thank You.
Gretings....
Gaetano

the name of report serverAs in Oracle Reports? If so you should use Reports as that's where you are most likely to find people with the requisite domain expertise.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

How to add a new font into Report Builder and Oracle Forms/Reports Server?

Hi,
I've searched the forum and can't find this being discussed.
My developers run Report Builder 10.1.2.0.2 on their XP laptops.
Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
This server runs on MS Windows 2003, SP2.
They've got a client who wants reports using the "Garamond Western" font.
So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
Thanks for your help.

Thanks.
This answers 1/2 of my question.
The developer can now use Report Builder on his laptop, with the new fonts.
But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
I have then stopped and restarted the Forms-Reports Server.

May i can't have Forms+Reports server on the same machine ?

Gurus!
I have installed Forms+Reports server on the same machine with their builders too. But then Forms & Reports server does not function when i call my .fmx file in browser the message,
"Java applet loading" appears but then the process hang up.
But when only installed Form server my .fmx file works.I also want to call my .rep files from forms.
May i can not have Forms+Reports server on the same machine?
Separately they work but not both but i require both how!
I have also seen when both installed and when i start services of both then ifweb60.exe is called two times in memory, it shows from task manager's process tab.
Please help!
Many thanks

1. Check these files to make sure you have the correct port settings for your forms: formsweb.cfg, base.htm
2. In your Windows Registry:
a. Add path for Reports Server (REPORTSxx_PATH)
b. Make sure you also have FORMSxx_PATH defined
c. Check values of your OracleFormsServer.
HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Services
OracleFormsServer
Verify the values of Host, Mode, Pool and Port.
3. Check Metalink Note 97487.1 for additional info.
And YES, Apache, Forms, Reports and Graphics can all run in the same machine.

How to deploy the Oracle Forms and Reports 10g in Web?

Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
Any one know how to deploy the Oracle forms and Reports in web?
Please help me out. Thanks in advance.
Vimal

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

How to run the parameter form example report :pform_report.jsp

how to run the parameter form example report : pform_report.jsp ?
I got these error message:
Reports Error Page
Sat Oct 18 11:58:24 CST 2003
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
PI with the name 'xml' can occur only in the beginning of the document.'.
     at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
     at examples.tools._pform__report._jspService(_pform__report.java:79)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
     at java.lang.Thread.run(Thread.java:484)

repost !
please help!

Newbie Question: How to find Forms/Reports Server Version

Hello,
Is there a way to easily find out what is the patchset installed for the Forms and Reports Server. I know that presently using AS 9i rel1 and Forms 6i, but how do you find out more information on the installed patches on Windows? thanks

Please see these threads.
how to find the developer version
Re: how to find the developer version
Report Builder version
Re: Report Builder version
Form patch set level
Re: Form patch set level.
Always search the forum before posting similar questions.
Thanks,
Hussein

How to put borders in the tabular form report

Hi,
I need to put borders in the tabular form report in the apex UI .I mean in the by default no boundary comes so I need vertical lines in the column .
So how to do that.
Thanks in advance.
Edited by: Vivek on May 22, 2012 8:25 PM

Edit the report page > Report Attributes > Change the report template for different look and feel
You can also customize the report template or even create your own template
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25707

How to know the list of reports that are in usage

Hello,
How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
Regards,
Anand.

Hi,
Pl look at following tables if you need any further detailed information
Table Name Use of the table
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references .
To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSRREPDIR
Directory of all reports (Query GENUNIID) .
To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSZCOMPDIR Directory of reporting components.
To get query change status (version, last changed by, owner) of a cube.
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Thanks and regards

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

Error installing Forms/Reports Server on linux m/c having EBS R12 installed

Hi,
We are trying to install Forms and Reports server (Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services) on a linux x86 box. The box already has Oracle E-business Suite R12 running on it. Our end goal is to install Oracle Transport Management (OTM), which requires Oracle Forms and Reports server to run its reports. When installing Forms and Report server I am getting following error. During installation, I gave a different set of ports to be used by Oracle Forms/Reports Apps server (and not the default) in staticports.ini and ensured that those ports are available. Any idea what could be the issue. If the issue is due to port conflict, how do I find which is the conflicting port. Also, is it possible to re-use Oracle Applications' Forms/Reports server for other applications like OTM.
Get the following error during installation of Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services:
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Resolution:
Base Exception:
java.net.BindException
Address already in use
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.Socket.bind(Socket.java:498)
at java.net.Socket.<init>(Socket.java:307)
at java.net.Socket.<init>(Socket.java:124)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.sendHTTPRequest(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getOpmnProcStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getProcessStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getComponentProcessStatus(Unknown Source)
I do now have much experience on DBA side, so my question may be very basic, but pls bear with me.
Thanks.
Namit

So ...
After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
Regards
Bruno Palma

How to disable or rename Oracle Report Server servlet command?

Hi,
I'm using Oracle9i App Server R2.
I would like to learn how to disable or rename Oracle Report Server's servlet command?
This is to avoid user from accessing http://myserver/reports/rwservlet/showmap to view the key map file content.
Please advise.

or example, my report server was rep_appserver, then i want to rename it to rep_test.
Here some step to accomplish it,
1. stop mid-tier
$ORACLE_HOME\opmn\bin\opmnctl stopall
2. stop em website
$ORACLE_HOME\bin\emctl stop iasconsole
3. rename $ORACLE_HOME\reports\conf\rep_<old_report_server_name>.conf to something else or delete it
4. rename $ORACLE_HOME\reports\server\rep_<old_report_server_name>.dat to something else or delete it
5. edit $ORACLE_HOME\reports\conf\rwservlet.properties file then change the SERVER parameter to new report server name(remember this new name has to be a unique name)
6. create a backup copy of the $ORACLE_HOME\sysman\emd\targets.xml file
7. open $ORACLE_HOME\sysman\emd\targets.xml, find old report server name and then replace it to new report server name
8. save new targets.xml file
9. open $ORACLE_HOME\opmn\conf\opmn.xml, old report server name and then replace it to new report server name
10. start em website
$ORACLE_HOME\bin\emctl start iasconsole
11. start mid-tier
$ORACLE_HOME\opmn\bin\opmnctl startall
HTH
Amkotz

REP-52266: The in-process Reports Server rep_myhostname failed to start

Hi Everyone,
My name is John and I've a small 10g report configuration issue which I would like to share and, hopefully, some of you might already have come across it and able to assist and guide me through it.
First, I've installed Oracle Developer Suite 10g 10.1.2.0.2 together with Report Builder 10.1.2.0.2 and Oracle Forms Developer 10.1.2.0.2 onto a 32bit Window 2000 Professional machine.
I've tried to run the following URL which test for the servlet connectivity and it returns fine with all the valid reports servlet commands page.
http://myhostname:8889/reports/rwservlet
However, as I've tried to run the 'test.rdf' report using the following link:
http://myhostname:8889/reports/rwservlet?destype=cache&desformat=PDF&report=test.rdf&userid=user/pass@host
And it returns the following error on the browser:
REP-52266: The in-process Reports Server rep_myhostname failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
Then I set trace option on in the myhostname.conf file and restart the OC4J instance. And the trace file has the following results:
*[2009/2/18 11:21:31:687] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched*
*[2009/2/18 11:21:31:687] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial*
*[2009/2/18 11:21:31:687] Debug 50103 (JobStore:writePersistFile): Purge persistent file*
*[2009/2/18 11:21:31:717] Debug 50103 (JobStore:writePersistFile): Purge persistent file done*
*[2009/2/18 11:21:51:766] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
*[2009/2/18 11:21:51:766] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0*
*[2009/2/18 11:21:51:856] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1*
*[2009/2/18 11:21:51:856] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready*
*[2009/2/18 11:23:1:687] Info 56106 (EngineManager:manage): Engine rwEng-0 is destroyed due to timeout*
*[2009/2/18 11:23:1:687] Exception 56097 (): Engine rwEng-0 callback timeout*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
*     at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
*     at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
*     at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
*[2009/2/18 11:23:1:707] Debug 50103 (ServerPacketReceiver:handlePacket): Got a request packet*
*[2009/2/18 11:23:1:717] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
*[2009/2/18 11:23:1:717] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown*
*[2009/2/18 11:23:1:727] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0*
*[2009/2/18 11:23:5:813] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully*
*[2009/2/18 11:23:5:813] Info 50002 (RWServer:shutdown): Server is shutting down*
*[2009/2/18 11:23:5:813] Info 50103 (RWServer:startServer): Notify thread to exit*
*[2009/2/18 11:23:5:843] Info 50103 (RWServer:startServer): RWServer thread exits*
*[2009/2/18 11:23:5:843] Exception 56097 (): Engine rwEng-0 callback timeout*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
*     at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
*     at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
*     at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
I've not changed any of the report's related configuration files and the java version of the machine is 1.4.2_06. I do not know whether I need to apply a patch for this particular Developer Suite version or is there something which I've not done in terms of post-installation tasks. Thank you for your time and effort. Any feedback is much appreciated as I've been spending a number of days to solve this problem. Thank you and have a nice day.
Kind Regards,
John

Hi,
Thanks for your reply and here is the output of the rwEng-0.trc file. I could not find anything "interesting" as you mentioned. Please let me know if you find anything missing in there. Also, currently there is only one network printer setup on the machine. Can you please elaborate on the printer bit as I'm unsure of what to troubleshoot. Also, I forgot to inform you that I have a previous version of Developer 2000 Form and Report installed prior to the 10g Developer Suite installation. Does it ring a bell to any other problem? Thank you again for your time and effort. Have a nice day.
Kind Regards,
John
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[1]=server=rep_myhostname*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=C:\oracle\ora10g1*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[5]=tracefile=C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_replace*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[7]=cacheDir=C:\oracle\ora10g1\reports\cache*
*[2009/2/18 11:21:35:783] Debug 50103 (RWEngine:init): args[8]=server_ior=C:\TEMP\tmp_1440568*
*[2009/2/18 11:21:36:284] Info 50128 (RWEngine:init): orb init succeeded*
*[2009/2/18 11:21:37:45] Info 55007 (EngineImpl:loadLibrary): Load rw.dll succeeded*
*[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): useDataCache = null*
*[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): ignoreDataParameter = null*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = rep_myhostname*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = C:\oracle\ora10g1\reports\cache*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_replace*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null*

How to map the all forms/reports server?

Similar Messages

Maybe you are looking for