How to map the Categorization Reasons (SAP CRM) with Order Reason (SAP ECC)

Hi Team .
I have created a service order for a spare parts material  in CRM Web ui , order got saved successfully without errors and had  replicated  to ECC system.
Issue : When the user is processing for billing, the system is asking for the order reasons to enter for the Item . (Checked the order in the incompletion log in of ECC) .  Though we have maintained the categorizations in the CRM System. 
The order reasons in the SD (ECC) and categorizations in the CRM are same. 
Client requirement: The order created in CRM  by mentioning the categorization reasons should automatically replicate to the ECC system without deviation  and billing should happen  in ECC without asking the order reasons.
Note #  Order reasons cannot be removed from the ECC System
Regards,
VCS

Dear Team,
I had resolved the issue on my own .
Sol : We had made the Order reasons mandatory in the CRM Web UI service order and we had removed the Incompletion Log for that particualr transactions types from the SD.
Regards,
VCS

Similar Messages

  • How to Map the Categorization Reasons(SAP CRM) with Order Reasons(SD  ECC )

    Hi Team .
    I have created a service order for a spare parts material in CRM Web ui , order got saved successfully without errors and had replicated to ECC system.
    Issue : When the user is processing billing in ECC , the system is asking for the order reasons to enter for the Item . (Checked the order in the incompletion log in of ECC) . Though we have maintained the categorizations in the CRM System.
    The order reasons in the SD (ECC) and categorizations in the CRM are same.
    Client requirement: The order created in CRM by mentioning the categorization reasons should automatically replicate to the ECC system without deviation and billing should happen in ECC without asking the order reasons.
    Note # Order reasons cannot be removed from the ECC System
    Regards,
    VCS

    Dear Team,
    I had resolved the issue on my own .
    Sol : We had made the Order reasons mandatory in the CRM Web UI service order and we had removed the Incompletion Log for that particualr transactions types from the SD.
    Regards,
    VCS

  • How to map the elements in Indesign document with the PDF elements

    I wanted to know any way of mapping elements in the InDesign document with the elements in the exported PDF document from the same InDesign document.
    E.g If I have an Image X in InDesign document, Can I point out the same element in exported PDF using some mapping?
    Thanks in advance
    -Sandeep

    What is meant by me is, if there is a Text element in InDesign document, I should able to point out the respective PDF object.
    I am looking for some way to mark a specific InDesign element and once we export the document to PDF, I want to point out to the same element in some way so that I can process it.
    Requirement is simple, one user will mark some elements in the InDesign document and export it to PDF and send it to the other user. Other user will parse the PDF and extract the same element back or process it and use it.

  • CRM Sales Order to SAP ECC troubleshooting

    Hi,
    I'm trying to replicate SAP CRM Sales order to SAP ECC, I have matched (transaction and document type, item categories). But when I create sales order in CRM, the following error occurs in the Web UI:
    Transmission log
    SALES_HEADER_IN has been processed successfully (Notification S V4 233)
    The sales document is not yet complete: Edit data (Notification W V1 555)
    Unknown object type 'BUS2032' (Notification E RL 303)
    SALES_ITEM_IN has been processed successfully (Notification S V4 233)
    Please note that the BDOC messages state in the middleware is processed and everything looks fine in SMW01. The customer and product are already replicated from the ERP
    Is there a more user friendly method to debug the error and to know the exact error.
    Thanks In Advance,
    Ahmed

    Hi Ahmed, ,
    It seems that the CSA bdoc is green (the internal CRM one) but the second , the replication one,  is not created
    due to this error.
    Here a few advises:
    Fistly create the same document directly in ECC. You might already get the same incompletion log as well in ECC and the reason should be quite obvious then.
    Check as well in ECC in t-code SE91 as in which program  error  RL 303 is used. You might have customized code in ECC.
    If this is not helping please use as well report CRM_ODE_CHECK_CFG to fing out if there some missing settings in the
    BTX interface. See as well note 490932 (it is an old note but the settings mentioned are still relevant for highr releases).
    Good luck with it.
    Best regards
    Christophe

  • How to map the user to Responsible Person for Proj/ Capital Investment Prog

    Hi All,
    Could you please help me in mapping the user to Responsible Person for Proj/ Capital Investment Prog.
    Here is the scenario. I am trying to restrict the user to access only WBS under a cost center but not to have complete access to the Cost Center. I in my way to do, I found out that we can create a user name using OPS6 tcode and use the reference number of the user we created in CJ20N, so as only the person who was added in the Responsible Person for Proj/ Capital Investment Prog list will be able to access particular WBS.
    Now my question is, How to map the user which I created using OPS6 tcode to user in user master record. I am not able to map the user, as its taking any random name to add in the list. Could some one please help me in mapping the user created in the list with the user master record.
    Hope I managed to put the question clearly. If you have any queries, please feel free to ask. Appreciate your time and thanks in advance.
    Farooq.

    Hi Stephan,
    Thanks for your time and finding SAP note for me. I got the problem fixed. The solution for the above problem is, When we create a responsible person for the project through OPS6 tcode, we have a column called "Offer User", next to the person responsible. We must add the user name next to it. And we can add only the user name which is present in the user master record.
    It solved my problem, but when I pressed F1 for help in this column, there is nothing mentioned about its mapping or anything.
    Thanks again for the help, Cheers,
    Regards,
    Farooq.

  • How i map the caf data with data of UWL in web dynpro

    Hi Experts,
    i created a bpm project with nwce 7.1.1 and it have a independent caf to keep it's data and status.
    now i have to create a view(use web dynpro) such like UWL,
    my question is
    how i map the caf data with UWL, and let the view can open the task(popup a window, just like UWL do) for user to finish their job?
    thanks.

    Hi Vic
    Your requirement is exect functionality of UWL based on WEBDYNPRO, CAF and BPM for automation? ,and question is How to use CAF with WD or CAF with UWL API's ?. please clarify it.
    Please fo through from given doc misght give u some idea
    1. [How to develop Web Dynpro UI for your CAF project |http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0722080650DB02400261803144436507End?blog=/pub/wlg/5414]
    Best Regards
    Satish Kumar

  • How to Map the Unit field  in case of DSO and INFOCUBE

    Dear Experts,
    I have a issue ,Please help me to solve this
    I have DSO as provider ,
    And, i have to map transformations  btw the Datasource and DSO.
    In generic Data source,  i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
    and normal Quantity fields  like KWMNG,OAUME(quantity related),OAUWE (value related).
    In DSO data fields as Key figure info objects like  0Quantity (which have 0Unit as unit of measure) and some other  key figures which have there respective unit of measure in info object  definition.
    So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
    (How it will be for both DSO and Info cube is there any difference?)
    Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

    Navasamol ,
    If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
    what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
    And i have  seen the Quantity fields  and there respective unit fields are mapped directly  to key figure info object
    in case of Info cube . Its working fine .
    If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
    why this difference btw DSO and Info cube can any one explain me in detail.
    Expecting your valuable suggestions.
    Thanks & Regards,
    Anjunath Naidu
    Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

  • How to restrict the change access in CRM for OLTP orders

    Hi Guru's,
    Please let me know  how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
    We have  the orders that are  created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM  system is allowing change mode for ECC orders and ending up with errors.
    Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
    Regards
    Suneel

    Hi.
    You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
    Regards.

  • How to upload the data from excel(3 tabs) file to sap environment

    Hi all,
    This is Mahesh.
    how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.

    Hi,
    The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
    However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
    You can find a solution for 2 worksheets in this post :
    TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
    I think you can easily modify it to handle any number of worksheets.
    Hope it helps !
    Best regards,
    Guillaume

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )

    Hi Friends,
                   Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
                   eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
                  Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
    <b><REMOVED BY MODERATOR></b>
    Ashiq
    Message was edited by:
            Alvaro Tejada Galindo

    You can use this report...It's not mine...
    REPORT zdummy_atg_2.
    TABLES: ICON.
    INCLUDE <ICON>.
    FIELD-SYMBOLS: <F>.
    SELECT * FROM ICON.
       ASSIGN (ICON-NAME) TO <F>.
       WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
                ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
                ICON-NAME.
    ENDSELECT.
    Greetings,
    Blag.

  • How to Map the parameters in GP interface?

    Hello All ,
    I have 2 callable objects in two different actions for same Block. How to map the first callable object output to input of second callable object ??
    Please give the clear details.
    Thanks
    Risha

    Hello,
    Goto the Block -> Parameters tab....select the 2 parameters ...click on Group button .....give a name to it and click 'Create Group' button.....
    Regards,
    Shikhil

  • How  to map the Third Party materila for Job Wok process in our Plant

    Dear All,
    please guide me how  to map the  Third Party  Subcontracting in Our Plant Means Customer materials to be Processed  in our Plant and  then we have to sent to customer after processing.
    please  Brief me  with the Proces sflow
    Reagrds
    kishore Edagali

    1) create a 2 material as non valuated (one incoming material "A1"& after processed material"B1")
    2) create a BOM. for A1
    & assign the B1 and maintain respective conversion
    3) create a routing for A1 and assign the relevant work center
    4) create a manual PO to receive the material from customer and store it in storage location
    5) create a production order and release the order  in co01
    6)issue the material :B1 to the order 9 in MB1a, 261 movement)
    7) and confirm the order (so that cost incurred for order is captured)
    8) create a  sale order and maintain service price in PR00 and send the material A1 to customer.

  • How to map the bulk users with the required  roles in portal at one time

    Hi,
    Would anyone tell me how to map the bulk users with the required roles in portal at one time?

    Thanks for all the reply.
    <b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
    I tried the first option like
    [group]
    gid=
    gdesc=
    user=
    Thr problem with this is I could n't put more no of users in the notepad.
    I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
    I tried creating seperate notepad but in Import it says "exists"
    I'm not sure about LDAP. Would anyone explain me the best approach to do this.

  • What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

    Dear all,
    Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
    Your suggestions will be highly appreciated.
    Thank you
    Raghu ram

    Hi Raghu,
    In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
    [https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
    There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
    regards
    Srikantan

Maybe you are looking for