How to Mark Radio Channels as Favorite in Apple TV 3rg Generation?

I dont see an option to mark my radio channels as Favourite on my 3rd Gen Apple TV. Please provide me the steps to perform this step. Thanks!

Not sure but try holding the select button over a radio station in the menu and see if it asks to add to favourites.

Similar Messages

How can I stream from iTunes (Win) to Apple TV (3. generation)?

Home Sharing is turned on, but I can't see my iTunes library on my Apple TV, also I've no idea, how to stream from my MacBook or PC to the Apple TV. Firewall is offline during testing. Streaming photos and from iOS-devices works.

What happens you you try? Are you looking under Music or Computers > Music. Have you entered in the home sharing ID you created in to ATV?

How do I get analog audio from my apple TV 2nd generation?

I am trying to find a solution to getting an analog (RCA stereo) audio output from my 2nd gen AppleTV to my Onkyo receiver so that I can listen to audio from it on my "B" (outdoor zone 2) speakers. Unfortunately the receiver only accepts anaLog input for the zone 2 speakers. The 2nd generation AppleTV only outputs digital audio. Kind of a pickle. The only solution I've found so far is a pricey digital to analog converter that costs more than the ATV! I have no idea if this will even work, or still output sound through the HDMI cable at the same time.
Anyone out there have any advice or suggestions? Any and all help would be most appreciated as Apple tech support can be very unhelpful without paying for the support plan.
Thanks,
Brian

Thanks so much for the quick responses! I've just ordered a DAC from B&H made by Gefen that should do the job. I opted not to get the one that decodes Dolby Digital as I only intend to listen to music on my Zone 2 speakers that are located outside on the back porch. However they do make one that would be great for those needing DD decoding, and I am told they corrected the popping sound when changes sources or channels.
I could have bought a much more expensive receiver, but I feel that a have a stellar system that is up to date with almost all of the new technology. This will all change in 5 years I am sure! At least for now I am all hooked up with HDMI and am receiving the best in picture and sound, with the exception of my "B" speakers being analog. No biggie.
I'm pretty happy with my Apple TV2 with except for the occasional wi-fi glitch and the lack of Pandora.
Thanks again for the replies!

Where can I find my favorite radio channel on app store?

Allo,
Where can i find my favorite radio channel on app store?

Not all radio stations offer their own apps - in fact relatively few do - so if a simple seach for the station name doesn't turn up an app, contact the station you wish to listen to and ask if they offer an Internet stream at all and if so if there's is any app(s) that can play that stream.
Regards.

How do I switch radio channels?

It was recommended that I switch radio channels on my router to fix the sluggish time for connecting to the browser. I was told I'm onChannel 6 andthat this might be over-crowded. Is this something a tech neophite can accomplish? Thanks , Margrette

Computer:
https://discussions.apple.com/thread/3900962
Mobile app:
http://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
Note, in the USA the only channels that do not overlap are channels 1, 6, and 11. All the others overlap to some extent, so if you change to channel 9 you will see interference from both users of 6 and 11 (and 7 and 8 and 10). Yes, I know it doesn't leave much wiggle room. My wi-fi can see 30+ routers in my area, all trying to use 3 channels.

How do I add back my favorites back after an upgrade to windows 7

I just installed Windows 7. I saved my info from my previous Vista install in a back-up. How do I migrate all my favorites and book marks back to the new Firefox installation. I am using Firefox 3.6
Thanks in advance!!

See this: <br />
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

How to select physical channels to save?

I'm in the beginning of implementing a new program.
The first issue is to get a list of all available devices and channels, and then mark the channels I would like to save datas from.
This input from the user should then act as an input to the "save data to file" part of the program.
Is there any suggestions how to do this?

Thank you for your feedback.
I'm not sure how to implement the scan list you are referring to.
What I have done so far, is to create an array of all the available channels. Attached is the program for this.
What is desireable is to have a select function like the one I found a picture of in the forum. See attached picture.
How can pick out the elements in the array and write them into this box?
Thanks in advance for all answers
Attachments:
Devices and channels.vi ‏27 KB
channel control.jpg ‏17 KB

Delete Radio channels in iTunes?

I have a huge number of Radio channels that Apple iTunes (v 10.6.1) comes with by default (as you know if you've ever looked at the Radio listings).
How can I delete most of them so I don't have to scroll through them?
If I have to do it via Terminal or going in to the System folder it's okay.
Thanks for any info.
Ron

Andrea Perego wrote:
I actually feel disturbed at being presented such ones as heavy metal or hip hop/rap.
You can create a playlist and drag only the stations you want to this playlist.
Then go to iTunes prefs > General and uncheck Radio..

Could not add channel to favorites list. please try again later

Since the last update to my FIOS box a few weeks ago, we've got new HD channels (which I CAN tune to) that I can not add to my favorites list. I get an error that says"could not add channel to favorites list. please try again later". I also tried 'add all to favorites' and it still will not add them. I have removed and re added other channels to make sure the 'mechanism' itself ins't broken.
I've tried manualy powering off and on etc to try to get it working again., but nothing has helped. I use the favorites to tune the box so that I can skip over channels that I don't have (that is to say, my favorites list is just the channels that I get [no HBO etc]) so it's a big hassle to not be able to have all the channels I have available.
Does anybody know what I can do about this?

You need to call the FSC and have them do an INIT , not just a reset, of your box - this fixed the problem on my 3 STBs. This will wipe out parental controls, audio compression settings, RF channel output (if applicable), and any other user settings that reside in nonvolatile RAM. The problem is a corruption of the nonvolatile RAM that can only be fixed by a box initialization - again NOT JUST A RESET.
If it is a DVR you will not lose your recordings and you may or may not lose your series programming settings (I didn't).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Changing the radio channel on Airport Express used to extend an Airport network?

Hi,
I'm using a Time Capsule as my primary wifi base station and an Airport Express to extend the network. The two devices are connected by WiFi.
My problem is that the 5GHz network of the Airport Express is using channel 100 and the reception just 5 meters away from it is everythign but great. According to Apple WiFI diagnostics I should use on of the low intensity channel like e.g. 36, 40.
My problem is that I dont know how to change the channel. Using Aiport Utilities there is no option to select the radio channe in the options for the wireless network. Is this not possible at all?
Thanks a lot for your help!

What model is the TC?
If you are extending the TC by wireless then the channel must be set on the TC not the Express.
Go to the wireless tab of the airport utility and select wireless options. Channels are there.
But if you have the new AC model the channel will not change for 5ghz.. you will not be able to adjust it even if you change the numbers..
You really should use 2.4ghz for areas where signal is bad.. it is still much better than 5ghz.

Add Internet Radio Channel to iTunes.

How can I add internet radio channel to iTunes?

Take a look here:
"How to Listen to Internet Radio Stations": _http://www.macinstruct.com/node/101_
And if you are having trouble with a url- look at the html source. This gives a rough example of an internet radio site that you can listen to in Safari. So, How do you get the url into iTunes?
_http://discussions.apple.com/thread.jspa?threadID=1305740&tstart=0_
Bonne chance!
-Geoff

How to edit FAV channels??

We just had to install the Motorola RNG200N and I can't for the life of me figure out how to Edit/Delete channels that we have entered into a Favorites list! We created a HD favorites list but now I can't see where I can delete channels out of that list AND then delete the list??? There has to be a way. Thanks for any help!

Actually, I created the list in a different place and that is why I couldn't edit or delete anything because I had to go into the MENU/SETUP/FAVORITE LISTS SETUP to do any editing and/or deleting. That is the ONLY place editing/deleting can be done. Sorely lacking on instructions for the MENU. Aren't there instructions for all the different MENU choices somewhere?? Online? because we sure didn't get a manual telling about all the different choices under the menu. Oh, well.

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

I just stepped over from explorer to firefox and al my saved favorites from explorer are vanished. How can I get back these favorites? Besides that I can´t find a favorite menu in my firefoxbrowser wich I like to work with.

I just stepped over from explorer to firefox and al my saved favorites from explorer are vanished. How can I get back these favorites? Besides that I can´t find a favorite menu in my firefoxbrowser wich I like to work with

In the device sync pages select Photos on the top at the right.
Un tick Sync Photos
Apply

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to Mark Radio Channels as Favorite in Apple TV 3rg Generation?

Similar Messages

Maybe you are looking for