How to maximize Windows

In Safari, I can minimize the size of window by typing Control-M,
question: how to maximize the window size with keyboard shortcut? I found that clicking the little green button at the upper left corner difficult.

You can't. No such function in Mac OS.
Try searching MacUpdate or VersionTracker for a third-party utility.
Zoom button (green button) toggles between a user set state and the smallest size that completely displays the content of the window.

Similar Messages

How to maximize a window

Hi all:
i want show a maximize window when program started.
How can i do it.

Hi
you have not specified the kind of window you r using. I am assumimg you r using JFrames and the code is as follows :
Dimension dim = Toolkit.getDefaultToolkit().getScreenSize(); //get screen size
getJFrame().setBounds(0,0,(int)dim.width,(int) dim.height); // set maximum screen size
getJFrame().setVisible(true); // set visibility
Hope this solves your problem.
bye,
MM

Minimize/Maximize window from code

how is it possible to minimize or maximize window from code.

crosspost:
http://forum.java.sun.com/thread.jsp?forum=31&thread=399398

How to convert window to tabbed page?

In CS4, when I drag a photo from windows explorer into photoshop, it becomes a tabbed page.
If instead I open the same photo via file menu, it becomes a window that when maximized, covers the menu bar, making the menu hard to access.
I can convert a tabbed page into a window by right clicking on the tab and select "move to new window".
How do I change a window into a tabbed page? This is more useful to me since the tabbed page does not cover the menu.
Could someone also explain why maximing a window covers the menu bar?

I tried many times but could not get it to work. Nothing is highlighted when I drag the window below the options bar.
Instead I found this solution:
using menu windows->arrange->consolidate all to tabs
Also, instead of trying to maximize window, using menu windows->arrange->tile would maximize the window without covering the menu bar

How to maximize a Form

How to maximize a Form ?
I want to set my Form in full-screen mode.
Set_window_property (... MAXIMIZE ) does'nt work...
Please Help...
Thanks

Yes I know.
I can maximize and minimize my Window but I can't have it in full screen mode directly at start of the application.
User must maximize his window himself.
I want to have my window in full-screen directly.
Any idea ?

How to Minimize Window Dialog

I'm creating a dialog window for PS CS6. Is there any way to minimize the window and then do some work in photoshop, once that gets completed bring back the same minimized window (other way round maximize window) when the user presses a predefined keys ? Is this possible ?
app.preferences.rulerUnits = Units.PIXELS;
var guides=app.activeDocument.guides;
var win = new Window ('dialog', 'Dialog Name');
win.grpButtons = win.add('group');
win.grpButtons.orientation='column'
win.grpButtons.alignChildren = 'fill';
win.grpButtons.pnl1 = win.grpButtons.add('button', undefined, 'Step1');
win.grpButtons.pnl2 = win.grpButtons.add('button', undefined, 'Step2');
win.grpButtons.pnl3 = win.grpButtons.add('button', undefined, 'Step3');
win.grpButtons.pnl4 = win.grpButtons.add ('statictext', undefined, 'Click on the steps to proceed');
win.size = {width: 240, height: 150}
var result = win.show();
win.grpButtons.pnl1.onClick=function(){
var result1 = win.minimize();
app.bringToFront();

bala281972 wrote:
That's cool JJ. Any suggestion on how to transfer control from JS to PS and bring it back please ?
I do not know if that can be done. The would be more like having two scripts Script 1 then user use Photoshop then Script 2.
However you can make script interactive like actions can have interactive steps. You can prompt user for information and you can make interactive steps. For example you can open a files selection dialog when the user can navigate to the file(s) that they want to script to process. If the user selects a file(s) the script will get a file or file list or a cancel or no no selection. The script can the do what would be appropriate.
For example say you want to help a user populate a collage template psd interactively in the script you could highlight the image areas to be populated then open a file selection dialog that would allow the user to select one image file of supported image file types. If the user select a file the script could place in the image. Size the place image smart object to fill the image area, Position the image layer over the area and mask off any excess. Then the script put the user into an interactive transform layer dialog where the user can tweak or accept the image composition within the masked area. tweak the virtual image crop change the image composition and scale. Once the user commits the transform the script would move on the the next image placement.

Maximize window

how to maximize a windon so that it can cover the all screen ????

T.B.M wrote:
Stretching a window to cover the screen is different from maximizing it:
f.setExtendedState(Frame.MAXIMIZED_BOTH);
Please go through the thread.............to know why I gave that reply.
But yes, the poster of this topic has both the answers now............. s/he can choose acc. to need.
Thanks!Remind me why I would choose your way over really maximizing?

Maximize window state from within portlet faces hyperlink?

Does anyone know how to implement/force window state from a hyperlink? I want to maximize the portlet window when any hyperlink is clicked from within the default view mode. The javax portlet api tags allow you to set this attribute like <portlet:actionURL windowState="maximized"/>. Is there a similar way to do this from within Creator's use of jsf? Or, am I going to have to do this within the class files? Thanks much

Yes, does anyone know how to maximize a portlet? Thanks.

HDD failure, I'd like to know how to get Windows 7 back on it.

Hello everyone, I've had a HDD issue lately, but before I move on to describe my issue, here are the specs of my notebook:
HP Pavilion dv6-3264ca
AMD Triple-Core CPU 2.2 Ghz
6GB RAM
128MB ATI Graphic Card
750GB Toshiba HDD
Windows 7 64-bit
The issue:
Recently I've had a very unfortunate HDD failure. The recovery partition wouldn't even load. I tried booting my notebook on Linux with the HDD still attached, and it wouldn't read. I extracted the HDD and placed it in an HDD-enclosuer and it still wouldn't load on Windows XP or Vista or 7. It would however read in the device manager of Windows and also in the BIOS.
I needed to extract some high-priority data from there so I managed to retrieve all my data safely through a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help it be usable again, and if that were to happen, the recovery partition would then be removed in the process.
In addition to that, I would like to install Windows 7 64-bit onto the drive, but the notebook box did not come with an installation CD, which is quite frustrating. Is there any way HP can let me download Windows 7 through some warranty service?
I have a one-year warranty on my laptop.
So in closing, I would like to know if I can get Windows 7 back onto my HDD for free, or if I need to go about buying Windows 7 again.
Any advice from you kind folks?
This question was solved.
View Solution.

Hi,
Here are Two options.
1. If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
2. You can order a replacement set of Recovery Discs using the link below - these cost around $30 if you live in the US.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows

How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows password
It is truly very often for us to meet the password problem, sometimes we would forgot windows password or lost windows password, and could not login windows system and make a big trouble. At this time, you would hope to find a way to reset and recover the forgotten password.
Actually, a lot of methods are available to recover or reset the Windows password. But most of them are designed for PC experts, not common PC users, those solutions are too complicated to get it work for us. And in this article, I will show you a professional software tool which could help you to reset forgotten windows password easily.
Total Windows Password Reset is powerful password recovery software to reset Windows admin
passwords for you to login Windows OS without reinstalling the OS when you forgot windows password or lost windows password. It could remove windows password and set the password to blank. Just boot from the program CD/DVD or USB flash drive, choose the account you wish to reset and all will be done. It is not a method to crack or bypass windows password, just remove or delete windows password and set it to blank so you could login windows to set new password.
Below is the guide of how to reset windows password with this software, only 3 steps are needed to reset windows 7/Vista/XP password:
Step 1: Download the setup file of Total Windows Password Reset on the official website:
http://www.resetwindowspassword.net/downloads/totalwpr.exe
And install it on another PC. Then you could startup the password recovery software to prepare the bootable disc.
Step 2: Burn the windows password recovery bootable CD/DVD or USB disc with the software.
Now, you may select “Burn DVD/CD Disc” or “Use USB Disc”. If you select first method, you need to have a blank CDR/DVDR disk, a COMBO or DVDRW drive on the PC. If you select to use USB disc, you just need to pay attention: This USB devices would be formatted, so you must make sure to back up all the data before use it. And the maximum capacity of the USB devices cannot exceed 2G.
Tips: We recommend you to use the DVD/CD method to do the windows password reset, because some computers may not support USB start-up.
Below is step by step to show you how to burn the CD/DVD
1. Launch Total Windows Password Reset main window, Click “Burn DVD/CD Disc” button.
2. In BurnCC’s main window, click “Browse” button and in the open window, locate the file “TWPR.iso” on your desktop, select it and click on Open to get back to the main window. Then, click “Start” button.
3 Your DVD drive should open and insert a blank CD-R or DVD-R disc into the drive and close it. Click “OK” button. Your CD will be burned in a few minutes.
Tips: if there is already a CD/DVD disc in the drive before run the software, the CD drive will open automatically . Please close it again. The process will be continuing.
Below is step by step to show you how to burn the USB drive
1 Insert a USB drive into a USB slot on your computer and run Total Windows Password Reset, Click “Use USB Disc” button.
2 Click“Step1”button. Then, Right-click on the usb_format.exe and choose “Run as Administrator”.
3 In USB Disk Storage Format window, set the file system to FAT, Check the Quick Format box, check the Create DOS Bootable Disk, Browse to the DOS_files folder on your Desktop, click OK & then Start.
4. Click OK on the following window and then close the USB format tool. Your USB drive now is formatted.
5. Click “Step2” button and open the USB drive with your computer. Then, copy the files from the USB_files folder and paste them directly to the USB drives main directory. 2 of the files may become hidden and you will not see them on the USB drive. This is okay. Your USB drive is now complete.
Step 3: Boot your PC with the burned CD/DVD or USB disc to reset windows password.
You need to insert the Created CD/DVD or USB drive into the optional drive of the locked computer and reboot it.
Tips: It your computer still boots from hard drive Windows OS, it's necessary for you to change your COMS or BIOS settings to make it boot from CD/DVD or USB drive. If you don’t know how to set it, you may visit the official website: http://www.resetwindowspassword.net or contact the computer manufacture.
The computer boots from CD/DVD or USB drive, then
1 The program will ask for the Windows OS hard drive volume. Enter the ID number of the hard drive volume that Windows is installed.
2 The program has detected all the user names of Windows and asks which user name password is to be removed. Enter the ID number for the User Name.
3 The program asks to confirm weather to remove the password or not. Enter "y" (yes) to confirm your action and "n" (no) to deny the action and hit "Enter".
4 The program asks whether to continue to remove passwords for other accounts. Enter "y" to continue and "n" to finish. Eject your USB from your computer first and press any key to restart the computer from Windows. Now you can log in Windows with an empty password (with no password.), just click “Enter” when you login.
If you have any questions of the procedure and the settings, you could visit the website:http://www.resetwindowspassword.net or send email to [email protected].
Now you could see that to reset or recover the admin login password of windows OS: XP, Vista, Windows 7 or 2000 is not so difficult and you can do it with ease.

Very interest posting. Thank you for this detailed description and useful links.
If you have more interesting stuff to share with us you are welcome.

How to install Windows 8.1 Pro on Macbook Pro

Hello everyone,
I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
After finishing the downloading process, I received this file which is about 4GB large.
When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

You need a 'Full' Installer.
From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install Windows 7 on a MacBook Air?

Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!

30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

How to maximize Windows

Similar Messages

Maybe you are looking for