How to measure the Data setup time

I want to do a SPI timing AC characteristics.
I use labview capture a frame of SPI data package from a oscilloscope and display in a waveform Graph.
Lead time, Data setup time, data hold time... should be measured.
So, what is the next  step should i do?
Thanks

Thank you, asastet.
I test the SPI module of a MCU. I have download a code to init the SPI and transfer a data package continuously.
The 4 channels of oscilloscope connected with SS, CLK, MOSI, MISO.
In labview, I capture a frame of SPI data package from oscilloscope and display in waveform graph control.
My project will automatically measure the data setup time and data hold time according CLK vs. MOSI.
Thanks.

Similar Messages

  • How to record the data against time?

    Hi there,
    I am doing a real-time measurement, and i get a 1-D dataflow  from the loading cell without time stamp.  I know how to record it and save it to a file. However, how to store the data against time? I know I can use "get date time in seconds.vi" to obtain the system time, but how to integrate it with the dataflow from the loading cell? it would be best if I can view the dataflow changing with respect to the system time in a waveform chat.
    Thanks.
    Mike

    You are doing a measurement with what? NI DAQ card or something else? The chart and saving to file are two different things. For an example of displaying time in a chart, look at the example called Real-Time Chart. How exactly do you want the time/measurement data written to file?

  • How to find the Date and Time of Modification of Column in aTable?

    Hi all,
    Do  you know how to find the Date and Time of Addition of Column to a Particular Table?.
    I know however, How to find the modification time of the Table. Using the below Query :
    Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
    Object_Name
    Last_DDL
    Employee
    20-Aug-2013 09:23:03
    I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
    Regards,
    Bhaskar M

    I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
    My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

  • Camileo S20 - How to display the date and time

    Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

    Hi,
    of course, I did it repeatly, it is written in my question above. I am not stupid.
    This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

  • How to capture the date and time of  a background job

    Hi experts,
    How to capture the date and time of  a background job?
    How to find whether it is runned succesfully or not?
    If it is not successful how to put error message?
    ASAP
    Thanx in advance,
    Sudha

    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.

  • How to read the date and time information of a file by labview

    how to read the date and time information of a file by labview? for example, created time and modified time.
    Solved!
    Go to Solution.

    if you need to know the last modification date of file:-
    "Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
    This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
    Thanks as kudos only

  • Apple Remote Desktop - how to change the date and time server ip address?

    Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
    So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

    Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
    networksetup -help
    systemsetup -help
    That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
    Cheers.

  • How to change the date and time during OVM installation for Fusion Apps

    Hi,
    The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
    Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
    Q/A: How to change the date/time in OVM image
    Refer SR : 3-5640792461
    Regards
    Ganesh Ananthapadmanaban

    Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
    networksetup -help
    systemsetup -help
    That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
    Cheers.

  • How to check the date and time when a material is blocked

    Hello,
       Please tell me how can i check the date and time when a material is blocked or unblocked.
    Regards,
    Priyanka

    Hi Pryianka,
    Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
    If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
    If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
    BR
    Csaba

  • How to get the date and Time?

    Hi,
    I am using Jdev 11.1.2.0.
    I had one database table. In that table one variable as bgnDtm and the datatype as oracle.jbo.domain.Timestamp. In my Impl class I declare one variable as beginDate(DateType as oracle.jbo.domain.Date).
    Now I am using the conversion as beginDate=(Date) SampleVO.getAttribute("bgnDtm ");.If I using this scenario I got the Type cast error. so how can I separate Date and Time value.
    So how to do. Please provide some suggestions.
    Regards,
    Ragu.

    you can get the time value either from oracle.jbo.domain.Timestamp or from oracle.jbo.domain.Date
    oracle.jbo.domain.Timestamp timeStampDate = (oracle.jbo.domain.Timestamp) SampleVO.getAttribute("bgnDtm");
    Time time;
            try {
                time = timeStampDate.timeValue();
                System.out.println(time);
            } catch (SQLException e) {
                e.printStackTrace();
            java.sql.Date sqlDate=timeStampDate.dateValue();
                oracle.jbo.domain.Date jboDate=new oracle.jbo.domain.Date(sqlDate);
            Time timeValue = jboDate.timeValue();
            System.out.println(timeValue);Edited by: M.Jabr on Dec 23, 2011 1:55 PM

  • How to have the Date and Time appear on printouts

    The Date and Time used to appear (at the bottom right) on things printed from websites. For example, receipts from an online purchase, an article on the web etc.
    I am able to see the setting to appear at bottom right (in the "File" dropdown).
    Following a Firefox update, I no longer get that very useful "Time & Date Stamp".
    This is very frustrating. Can anyone help?
    Thanks,

    Are you saying you can see the date and time in the "Print Preview" or in the "Page Setup" dialog under the "Margins & Header/Footer" tab. The date and time won't display if it is not set correctly in the "Page Setup" dialog. Also, is this on one specific printer or many different ones? If this is only happening on one printer there may be a problem with the print driver, even though there would be probably more serious things going on than a missing footer. You could also experiment and create a pdf using "PDF Creator" at http://www.pdfforge.org/pdfcreator and see if it comes up on the created document.
    Hope this gives you some headway.

  • How to set the date and time format from Windows Server 2008 R2

    Hi,
    I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
    Yoshika04

    Hi,
    In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
    time format. For more information, please refer to:
    Regional Options Extension
    http://technet.microsoft.com/en-us/library/cc754496.aspx
    Regards,
    Bruce

  • How to get the date n time for log in ODI

    Hi,
    I wanna ask, what is the syntax for getting the date n time when i specify the location of log for Interface. Thanks.

    I quite do not get what you are trying to achieve here.
    - In a mapping, use the DBMS engine sysdate command.
    - In a variable, you can refresh the variable value using a "select sysdate from dual" type of query.
    - You can also use the appropriate odiref substitution method to get a date. For example:
    Current year is: :<%=odiRef.getSysDate("y")%>
    Hope this helps.
    -FX

  • How to extract  the date n time from images

    can anybody help me...what function/ method that i can use to extract the date an time from images
    thanks

    Hi norazanita,
    Please give clear idea what you want so one can proceed.
    And if i am not wrong and get you correctly than i think you need to read about OCR for JAVA.
    Regards,
    Joshi Shirin.

  • How to find the date and time difference in InfoPath 2013?

    Hi All,
    My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
    If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
    How to achieve this?

    Hi Sam,
     I believe we had discussed the same issue in the below thread. Can you please refer the below one?
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
    If it's not helping you please let us know
    Sekar - Our life is short, so help others to grow
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

Maybe you are looking for